2aHawaii
Vendors => X-ring Security & Firearms => Topic started by: SpeedTek on August 22, 2012, 02:57:49 PM
-
We ran out of Cerakote so we will be ordering a few colors.
We are able to order small bottles enough to paint 2 complete pistols.
Which means if you want a special color we can order it.
Colors we stock:
Armor Black
Graphite Black
Bright Pink
OD Green
Flat Dark Earth
Magpul Flat Dark Earth
Stainless
Above are all bake on finishes.
Air Dry Finishes:
OD Green
Flat Dark Earth
-
Can you get me a neon or bright blue?
-
Stainless please.
-
Think it's called. Flame blue. No need to much just enough for my receiver, and scope mounts
-
Dex, you y'all paint my 700 in multicam?
-
You guys have any Greys, dark grey preferred.
-
No grey. Next order. Maybe 2 months from now. We still waiting for our shipment of colors listed above.
-
I'd be interested in Sniper Grey or Stone Grey for my Baby Eagle.
-
I'd be interested in Sniper Grey or Stone Grey for my Baby Eagle.
Sniper Grey is the one I had my eye on :thumbsup: It's kinda on the dark side, which is good.
-
About how much does it cost to get a pistol blasted down and coated? Do you have any paints in stock?
-
We ran out of black a few weeks back. Reordered and its on the way.
-
We ran out of black a few weeks back. Reordered and its on the way.
Is it back yet :O? And, how much does it run for 1 pistol?
-
Is it back yet :O? And, how much does it run for 1 pistol?
In for the answer.
Awhile ago, I was quoted $150 for slide and $150 for lower. I can't remember if it included disassemble/ prep and if those prices are still valid?
I REALLY want an older pistol ceracoated, but $300 is bit more than I want to spend.... hope I'm wrong.
-
Sorry Gang we are still waiting for the shipment of Cerakote. It should have been here on the 15th.
The Cerakote jobs are piling up so its going to take some time for us to do all of them.
To keep costs down we do everything by runs. It helps save cost on waste.
This is the order we are spraying in. (ALL Oven Cure finishes)
1. Armor Black
2. Graphite Black
3. FDE
4. Stainless
This is what we have for jobs for right now.
Thanks!
-
Sorry Gang we are still waiting for the shipment of Cerakote. It should have been here on the 15th.
The Cerakote jobs are piling up so its going to take some time for us to do all of them.
To keep costs down we do everything by runs. It helps save cost on waste.
This is the order we are spraying in. (ALL Oven Cure finishes)
1. Armor Black
2. Graphite Black
3. FDE
4. Stainless
This is what we have for jobs for right now.
Thanks!
Can we get an idea on price, say for a 1911?
-
PM SENT
-
Sorry Gang we are still waiting for the shipment of Cerakote. It should have been here on the 15th.
The Cerakote jobs are piling up so its going to take some time for us to do all of them.
To keep costs down we do everything by runs. It helps save cost on waste.
This is the order we are spraying in. (ALL Oven Cure finishes)
1. Armor Black
2. Graphite Black
3. FDE
4. Stainless
This is what we have for jobs for right now.
Thanks!
How much for a P229 in stainless?
-
How much for a P229 in stainless?
Are you guys still doing it?
-
you guys got foliage green? I'm thinking of getting my ar15 upper, lower and rail done if the price is right.
-
Are you guys still doing it?
Yes but we are holding off on jobs right now due to the political climate.
It requires me to run away from the store for 4 hours a day. So we can't afford to
Do it right now. Sorry.
-
you guys got foliage green? I'm thinking of getting my ar15 upper, lower and rail done if the price is right.
We didn't order any foliage green on this order.
Maybe in 2 months.
-
what color do you have in stock now?
-
what color do you have in stock now?
Armor Black and Stainless.
-
Armor Black and Stainless.
And "Dirty BiBi Dee" brown
-
Do you all have the magpul FDE?
-
Do you all have the magpul FDE?
thats coming in next month.
-
Dexter,
How about Satin Aluminum?
Thanks.
-
is it possible to cerakote a glock frame to FDE? will it eventually flack off or discolor?
-
is it possible to cerakote a glock frame to FDE? will it eventually flack off or discolor?
Yes. Air dry only. It may flake off eventually but touchups are easy. It is the most durable finish compared to others out there.
There is a new epoxy finish the is milspec approved. I am waiting for the company to release me more info.
-
Yes. Air dry only. It may flake off eventually but touchups are easy. It is the most durable finish compared to others out there.
There is a new epoxy finish the is milspec approved. I am waiting for the company to release me more info.
sweet let us know when you get some the new epoxy in.....
-
Wanted to cerakote my glock slide only. For some reason, the finish is not as good as my other glocks! Are you folks still doing cerakote? If so, how much? LMK! Thanks
-
Wanted to cerakote my glock slide only. For some reason, the finish is not as good as my other glocks! Are you folks still doing cerakote? If so, how much? LMK! Thanks
What color?
-
What color?
Black thats close to "stock" works for me or any black that you spraying that day.
-
How much will it cost me for my beretta 92fs flat dark earth, let me know thanks. :shaka: :shaka: :shaka:
-
How much will it cost me for my beretta 92fs flat dark earth, let me know thanks. :shaka: :shaka: :shaka:
What parts? all? Mags? Grips?
-
What parts? all? Mags? Grips?
Will be all. Excluding the mags.
-
hey Dex any word on that epoxy mil spec finish yet?
-
I'm waiting for reply. :shaka: :geekdanc: :shaka:
-
.
-
Can you bring in Sniper Grey? How much would cost to do an upper, lower and rails? AR...
Also how much would be to do a pump shotgun receiver and 2 barrels?