2aHawaii
Tools and Uses => Reloading => Topic started by: keoni008 on September 04, 2012, 11:24:35 PM
-
Is it true your not suppose to shoot reloads threw the stock barrel of a glock?
-
Is it true your not suppose to shoot reloads threw the stock barrel of a glock?
Never heard that one. But I know you are not supposed to shoot lead thru the stock barrel due to the type of rifling.
-
Never heard that one. But I know you are not supposed to shoot lead thru the stock barrel due to the type of rifling.
+1 Reloads are fine if they're jacketed bullets. I have a friend that shoots lead out of stock barrels anyway, but keeps his round counts low before cleaning the barrel thoroughly. YMMV at your own risk.
-
I believe there was some concern with shooting 40 s&w reloads. The glock barrel does not fully support the case.
-
+1 Reloads are fine if they're jacketed bullets. I have a friend that shoots lead out of stock barrels anyway, but keeps his round counts low before cleaning the barrel thoroughly. YMMV at your own risk.
So shooting lead is ok if you clean the barrel really good?
-
So shooting lead is ok if you clean the barrel really good?
I'm not suggesting you do it. I just know of someone who does, and still has both his hands.
I don't reload 9mm yet (need to buy a ton of stuff for my progressive), but I already have an aftermarket barrel for my Glock for when I do shoot reloads.
-
Is it true your not suppose to shoot reloads threw the stock barrel of a glock?
I heard the same. My friend and I spoke with someone at the range with an aftermarket Glock barrel BECAUSE he only shot reloads.
-
I heard the same. My friend and I spoke with someone at the range with an aftermarket Glock barrel BECAUSE he only shot reloads.
Oh crap... I've been shooting reloads on my 23. Time to go look for an after market barrel I guess.
-
Oh crap... I've been shooting reloads on my 23. Time to go look for an after market barrel I guess.
Was it with lead bullets?
If so, what are your thoughts? Do the grooves look like they're collecting lead?
Should let keoni008 know!
-
A couple of seemingly useful threads...
http://www.glockfaq.com/content.aspx?ckey=glock_faq_reloading
http://www.defensivecarry.com/forum/reloading/133521-let-me-get-straight-glock-reloads.html
http://www.defensivecarry.com/forum/reloading/109855-anybody-reload-their-glock-9mm.html
I think best to re-read the fine manual and follow what it says.
-
All this is interesting. However, after reading all the provided information and doing my own research it appears that most of the KaBooms were do to leading problems, overloaded handloads, early issues with the .40 S&W cartridge.
1. Overloaded handloads can make any pistol got KaBoom.
2. Leading issues can occur in any pistol but due to the type of rifling that Glock uses it exacerbates the problem and apparently can occur within a few hundred rounds.
3. The .40 S&W cartridge had problems during its infancy and the Glock barrel design exacerbates this issue.
So if I don't overload my handloads, and I don't use lead bullets, and I use brass in good condition I would think shooting handloads is okay. Especially if you are shooting 9mm or one of the other calibers.
It is funny that this just came up as while I have been reloading 9mm for over 30 years I have never ran my reloads through my Glock. That is until now. I just reloaded my first 300 rounds for use through my Glock 17. I have no issues with shooting these reloads through my Glock. And I will let you know how it goes after my foot heals. I loaded 100 rounds of 147gr Hornady XTP using Titegroup at 3.4 grs (Mid point in my book). 100 rounds of 125gr Hornady XTP and 100 rounds of 124gr Sierra FMJ using Titegroup at 4.2grs (About Mid Point in my book). I am using once fired (through the Glock17) high quality brass with CCI 500 small pistol primers and a taper crimp.
-
Was it with lead bullets?
If so, what are your thoughts? Do the grooves look like they're collecting lead?
Should let keoni008 know!
I've been using jacketed so it should be ok I guess.
Nothing that I can see in the grooves from the jacketed reloads. I like them just fine though. I almost ordered the lead but good thing I didn't.
-
Ok, so i guess bottom line do not shoot LEAD threw the stock glock barrels! What about copper plated bullets are they ok to shoot threw the stock glock barrels?
[attachment deleted by admin]
-
Lead is a definite NO.
Glock advises against using reloaded ammo in their firearms, but so do many manufacturers.
The biggest reason for that is the lack of quality control from reloader to reloader.
For every guy that spends hours getting the measurements perfect then double and triple checks them, there's some idiot that tries to create super hot loads and doesn't measure anything.
I have friends who shoot reloaded ammo exclusively in their factory glock barrels with no problems whatsoever.
They all use jacketed ammo, though.
-
Lead is a definite NO.
Glock advises against using reloaded ammo in their firearms, but so do many manufacturers.
The biggest reason for that is the lack of quality control from reloader to reloader.
For every guy that spends hours getting the measurements perfect then double and triple checks them, there's some idiot that tries to create super hot loads and doesn't measure anything.
I have friends who shoot reloaded ammo exclusively in their factory glock barrels with no problems whatsoever.
They all use jacketed ammo, though.
Is there a difference between jacketed and copper plated heads?
-
Copper plated is softer than jacketed, and slightly more tough than regular lead.
-
I've shot around 5k or so plated reloads for my 40SWglock, no problems. Main thing is to check your cases for damage each time you reload, and keep the pressures moderate. Plated is more expensive than lead, but cheaper than jacketed. It's just a really thin coating of copper while jacketed has a very thick coat of copper.
-
I've shot around 5k or so plated reloads for my 40SWglock, no problems. Main thing is to check your cases for damage each time you reload, and keep the pressures moderate. Plated is more expensive than lead, but cheaper than jacketed. It's just a really thin coating of copper while jacketed has a very thick coat of copper.
Is your glock the factory barrel?
-
yup
-
Same here, been shooting 9mm reloads on my g34 gen4, with rainier copper plated bullets and have no problems