2aHawaii

Tools and Uses => Reloading => Topic started by: Frog on September 21, 2012, 02:21:23 PM

Title: Reloading Slugs for 12ga
Post by: Frog on September 21, 2012, 02:21:23 PM
I recently acquired a MEC 9000 reloader that was used for trap shooting.  I'd like to try to reload slugs with this, anyone know if its possible or have done it on this reloader?  Is there a supplier locally that I can get slugs from? 
Title: Re: Reloading Slugs for 12ga
Post by: astroboy on September 30, 2012, 12:40:29 PM
Most slug loads will require a roll crimp. I doubt that the mec has this feature. I remember seeing a simple roll crimp tool that used an electric drill to do the job. If you can find load data for a slug load that uses a folded crimp then you will not need the roll crimp tool. One should follow the listed load components from a reliable reloading manual. Items such as the correct wad, fiber and card wads are specified in the load data. I have not seen any of these items or just the slugs for sale at a local store recently.

Title: Re: Reloading Slugs for 12ga
Post by: hvybarrels on October 01, 2012, 06:14:04 PM
I have one of those roll crimpers that goes on the end of a drill but haven't gotten around to using it yet. As i understand you don't need a card if you are loading slugs. Also have a Lee Slug mold and thinking about getting a lead melting pot soon and/or keeping an eye out for a turkey fryer or propane burner.
Title: Re: Reloading Slugs for 12ga
Post by: astroboy on October 02, 2012, 04:46:09 AM
You may or may not need a card wad but I would play it safe and use a card wad if the load data called for one. I recall problems with the fiber wads getting stuck in the base of the hollow base slug. This would really mess up accuracy. If you load a round ball .662 or .690 depending on the wad column and hull combination, you may be able to forget about roll crimping. Loads of this type use a folded crimp.The late great Dean Grennell wrote a few articles on this type of reloading. The Lyman shot shell manuals may still have load data on slugs and buck shot. 
Title: Re: Reloading Slugs for 12ga
Post by: hvybarrels on October 02, 2012, 01:59:50 PM
I want to try wax slugs next but don't like the idea of exploding barrels.