2aHawaii

Tools and Uses => Reloading => Topic started by: HeliosRX8 on December 08, 2021, 04:09:19 PM

Title: Incipient Case Head Separation
Post by: HeliosRX8 on December 08, 2021, 04:09:19 PM
What you think? A good example of incipient  case head separation?

I’m not chancing it, just wanted to share one to be tossed out.

Head stamp = WIN USA 5.56mm
unknown year, once fired.
Title: Re: Incipient Case Head Separation
Post by: ren on December 08, 2021, 04:20:59 PM
Can't tell. One way to determine if the brass is thin and about to separate is to run a paper clip on the inside to feel for a depression.Or if you have a borescope you could try to see inside of the case for any abnormalities.