2aHawaii
General Topics => General Discussion => Topic started by: Bigkahuna808 on October 03, 2012, 07:56:02 PM
-
Anyone on this board shoot black powder?
While waiting for my stall I got to talking the guys shooting black powder rifles and go the chance to shoot a few times. Now I think I'm hooked and want to learn more. Where can I buy a gun and all the supplies needed to get going?
I gotta say though I am very slow on the reload, Im prob the worst revolutionary/ civil war solider ever. Took me almost 2 min to load aim shoot. Though I did hit the gong at 50 yards each time I shot.
-
You can buy blackpowder out of any catalog & get it shipped to your house.
-
^^^Sorry, blackpowder long and short guns.
For powder check with the usual suspects; Windward, Security, Young Guns, etc.
-
I grew up shooting black powder. Haven't done it in along time, outside of the Shooting Sports Fair, but I fully intend to get back into it some day. It's a blast!
-
Dixie Gun Works is the Black Powder Shooters Bible (So I hear). It only costs $5.00. And it is where those black powder guys recommended to me to get started.
-
Please enlighten me I can only find catalogs by that name. Hopefully those guys will be at the show this weekend
-
Please enlighten me I can only find catalogs by that name. Hopefully those guys will be at the show this weekend
It is a catalog. Does Dixie sell books about black powder? And from what they were talking about at lunch they were planning to be there but maybe under the SASH booth.
-
Thanks for the info!
-
Bigkahuna, I think most of us are starting in the middle with our answers.
For black powder firearms, you don't need the services of a gun store or an FFL. You can order them directly from any number of sources. Because of that, there isn't s gun store in town that has much of a selection.
The catalog that was recommended from Dixie Gun Works is just that, a catalog. They sell black powder firearms and accessories. They are not the only game in town, but it is a good beginning. If nothing else, you'll be able to start a wish list.
Just as with contemporary firearms, making a selection is the hardest thing to do. Your best bet is to hang out with guys who are already shooting, try as many of their firearms as you can, and use that as a basis for your first selection.
-
Looking at the Dixie WOrks web site, their cheapest muzzleloading rifle is $332. But they have a kit for $265! And Christmas is coming!!
-
I started reading more up online and can't figure what gun I want. The gentlemen I talked to said avoid kits cause they never quite fit right. Igot a chance to shoot a Thompson center percussion cap. I like the vintage styles not the modern hunting Huns.
-
I started reading more up online and can't figure what gun I want. The gentlemen I talked to said avoid kits cause they never quite fit right. Igot a chance to shoot a Thompson center percussion cap. I like the vintage styles not the modern hunting Huns.
I don't really understand the whole "modern muzzleloader" thing myself. If I want a muzzleloader, I want it to at least look like it's a piece of history. Sure, it can be made using modern manufacturing techniques and modern materials, but it should look right at home on "Davy Crockett."
Like I said, selection is the hard part. If you make it to the mainland, find yourself a mega-sporting goods store, like a Cabelas or a Gander Mountain. They'll have a variety to pick up and fondle. Other than that, check out the local gun show. There will be at least one display of muzzleloaders in there somewhere.
The fact that the kits "never quite fit right" is just part of the game. It's not really any different for most guns when you start swapping out parts and furniture. For me, at least, part of teh fun, and the pride of ownership, comes from knowing that I had to finagle it into working!
-
I feel the same way about kits its the joy of building them..polishing the brass bands...staining the stocks...I'd do it all but cast my own ammo. It was his recommendation...I'd mostly worry that I'd assemble the Acton wrong or not seal the chamber right.
The one thing that caught me off guard was blowing down the barrel after firing..to clear all the residue or embers before a reload of powder.
-
Or you could get a little later model and get a cartridge gun. I reload so I am thinking a cartridge rifle and maybe pistol might be good. Then maybe graduate to muzzleloading.
-
I don't really understand the whole "modern muzzleloader" thing myself. If I want a muzzleloader, I want it to at least look like it's a piece of history. Sure, it can be made using modern manufacturing techniques and modern materials, but it should look right at home on "Davy Crockett."
Hint: Prohibited persons.
For those who want to hunt and shoot, but who've been caught peeing in an alley after a couple of beers or something, muzzleloaders are their only option. Many of them want the best chance for harvesting game, and go for the modern stuff. Saboted rounds, electronic ignition, the whole ball of wax.
So said the owner of a local BP shop. I bought an 1858 Remmie and powder and ball and caps and fuse for my model cannons from him and got to yakking.
Note that the above pertains to Federal proscriptions. Some states also include possessing "King Black" muzzleloaders in their own restrictions as to prohibited persons.
Or you could get a little later model and get a cartridge gun. I reload so I am thinking a cartridge rifle and maybe pistol might be good. Then maybe graduate to muzzleloading.
I got a .45 Colt replacement cylinder for the Remmie later on, so that's another option, should you go for handguns in black powder. However, my understanding is that prohibited persons cannot possess the centerfire cartridge cylinder with the gun. It was a bit of a pain to get the .45 cylinder back into the gun, bearing in mind that one had to hold the backplate of the cylinder on while inserting it, and had to end up with an empty chamber under the hammer. I frankly can't imagine doing it on horseback.
Terry, 230RN
-
You can buy blackpowder out of any catalog & get it shipped to your house.
[/quote
I have heard anecdotally that only BP substitutes like Pyrodex can be shipped to Hawaii as BP is considered an "explosive" vice a propellent. Federal shippng regs and stuff.
For this reason you may not find the real thing at your local shop. Enlighten me if I am wrong.
That being said, I am kind of a purist. I feel that a BP firearm should use BP, not some new fangled substitute..
Necessity being the mother of invention, and considering the technology involved in BP manufacture, it appears not to be a big thing to make if the proper precautions are studiously observed. Blowing one's self and house up is just not allowed. The wife might not understand. The web as always has all the ways, including collecting your own bat shit or worse to make the Niter (Sodium Nitrite).
Think I'd buy that part at the chemical supply house, or refine some stump remover.
Above all else it appears to be legal, with some limitation on the amounts made.
I have a really nice TC Hawken rifle that my Dad left to me. He built it from a kit and sentimental value aside, he was a perfectionist. It is really nice and never been fired.
'twould be fun to go out to the range and play one day. I am all gimped up for a while and will have time for light duty inside stuff for a while. maybe I can get it up and running.
Aloha
-
Post deleted by poster
-
Upon further review of the subject at hand, Pyrodex seems like a pretty good idea.
There are too many moving parts, variables and places to make a mistake to guarantee a safe, consistant product.
I think that I will let the pro's build my propellent.
Some of the history is interesting though, how some geographical ares of the country became sources and therefore stratigecally important as powder producers due to ready availability of one or the other of the primary ingedients. These are areas that came into play first during the Reolution and later in the Civil war.
Check it out if you are into the history aspect.
It is also mentioned that clean up after a sustitute is much easier.
Aloha
-
f you're really into black powder (I'm not, anymore), you will find this book absolutely fascinating:
GUNPOWDER: Alchemy, Bombards & Pyrotechnics
The history of the explosive that changed the world
by Jack Kelly
Basic Books, New York
ISBN 0-465-03718-6 (Hard Cover $?
ISBN 0-465-03722-4 (Paperback) US~$14.95
(http://www.loesch.org/~arviel/gunpowderjacket.jpg)
I spotted this one on a workmate's desk, looked it over, and was intrigued enough to buy three copies as Christmas presents for myself and my two sons.
It's quite fascinating, and gives a tremendous amount of detail, not only in the influence of gunpowder on history and tactics, but also on the technical aspects of gunpowder. Did you know that when ignited in a closed chamber, the gases would take up 3600 times the volume of the powder? And its ultimate pressure in a stout container is over 20 tons per square inch? (Pages 115-116.)
It is amazing the contributions that the ever-scientific Antoine Lavoisier made to the production of powder for France. Yet, despite that, he got the guillotine during the French Revolution. (But, to be sure, he was also an efficient tax collector, hence The Big Heavy Knife.)
There's a lot on black powder during the Revolutionary and Civil Wars, and the book outlined a lot of the problems of obtaining and refining the saltpeter and milling the powder.
Actually, this is a book that should be on your shelf, whether you shoot King Black or not.
Terry, 230RN
-
I was watching triggers with Gunny yesterday and they was talking about the evolution of firearms in the united states, from the original musket to the trap door, to the 1903 and garand. Most memorable moment of the show, when he was packing the powder in the musket and the thing blew up and shot out. I was like wow, thats not for me. Hopefully that never happens when reloading.
-
Anything can set off blackpowder. The stuff is volitile. Static electricity is a horror around bp.
-
Crazy. And it burns fast and leaves a lot of soot
-
Cleaning of BP after shooting can be a concern as well. It is very corrosive and you can only use certain types of cleaners and anti rust preservatives to prevent gunky buildup. I heard Ballistol is a good one for rust, and or course soap and water and a water hose was mentioned. haaha.
Also, watch what type of bullet lube you use.
-
I was watching triggers with Gunny yesterday and they was talking about the evolution of firearms in the united states, from the original musket to the trap door, to the 1903 and garand. Most memorable moment of the show, when he was packing the powder in the musket and the thing blew up and shot out. I was like wow, thats not for me. Hopefully that never happens when reloading.
Just observe basic safety precautions and you'll be fine.
1. Don't get in a hurry
2. Clear the barrel of live embers. Some like to do this by blowing down the bore. I always preferred a slightly damp patch on the ramrod.
3. Never point the thing at your face when loading.
4. Never pour your powder from a larger container. Always use a single-serving measure.
Even if (when) you end up igniting your charge prematurely, the worst that will happen is you lose the hair on your knuckles! ;)
-
Even if (when) you end up igniting your charge prematurely, the worst that will happen is you lose the hair on your knuckles! ;)
:rofl: bwahahaha
-
Good lead on the book. Just ordered a copy from Amazon
THANX and Aloha
-
Gordyf, when you get that book, you will find it is incredibly informative and is a real page-turner. In France, they had people going around collecting "stuff" from people's chamberpots and commodes to refine to the saltpeter. The refining process involves boiling and crystallization from saturated solutions. A stinky, stinky process. Lavoisier was charged by the government to efficientize and improve France's powdermaking process, and he even developed delicate balances for weighing ingredients to figure out the best proportions.
The du Ponts were friends of Lavoisier and brought a lot of his technology to the US when they emigrated from France (skipping out just before all the Guillotining), and set up powder mills in Wilimgton, Delaware. A lot of King Black devotees were saddened when duPont quit making black powder.
When I was a kid, some of my friends and I used to make BP. We got saltpeter from the local butcher (it's a meat preservative, too) and sulphur from the drugstore, and got charcoal from charcoal bags for grills. (There were no briquets at the time --which don't work anyway because they're dampened slightly with charcoal lighter.)
Both the butcher and the druggist knew what we were up to, but that was the 1940s and 50s. We never could get that rapid "Poof!" you get with quality commercial stuff, but it worked in our primitive cannons, which would sssshhhHHH loudly from the fuse hole before enough pressure built up for them to go bang. We made fuses out of our powder and cigarette paper.
We did not know about the "corning" process, so our powder was kind of fizzy rather than poofy.
While I had my 1858 Remington, I got some Pyrodex pellets with it and we lit one in the open air. It sizzled and jumped around in the grass quite vigorously. Interestingly energetic.
Static sparks? I could not light off a small pile of BP (real, DuPont FFFg) with vigorous shuffling across the rug in my "favorite" static-generating slippers and holding a key over the pile to make a spark. Sorta like Ben Franklin, but in reverse. This doesn't mean it couldn't happen, but the indvidual granules are coated with a film of graphite which minimizes this problem. Not eliminate it, just minimize it. A spark from, like, striking steel, will set it off. I never tried that, since flintlockers do this every day anyhow.
I just made the interesting discovery the other day that potassium nitrate (saltpeter) is the de-sensitizing ingredient in modern sensitive teeth toothpastes. So if you run short, I guess you could refine it from a couple thousand tubes of toothpaste. Beats boiling down your own piss. And it has a nice, minty smell. :)
Terry, 230RN
-
Thanks 230RN There is a stump remover that will remain un-named , sold in a black plastic container OTC at the big box hardware stores. This stuff is like 98% Potasium
Nitrate or KNO3. It can easily be purified to 100%
I discovered this because of a publication from the UH extension service that recommends soaking papaya seed in a solution of the stuff to maximize germination.
It works by the way, but had nothing to do black powder.
The static thing is not much of a problem here in the tropics because of the humidity. It may not do BP easily, but with other stuff it is a real issue.
I suspect that more than one 60's radical blew up His kitchen, workshop and or himself because he shuffled across the capet in the winter.
Aloha
-
Gordyf remarked,
I suspect that more than one 60's radical blew up His kitchen, workshop and or himself because he shuffled across the carpet in the winter
.
<completely off topic>
And I suspect that quite a few of them blew themselves up 'cause "somebody" <ahem> provided them with deliberately deadly cookbook instructions where the final step was "arming" the bomb by connecting some wires, but instead set it off.
There were quite a few bombings by disgruntled Hispanics around Boulder Colorado, where I lived, where I suspect this was what happened. There were least two of them locally, and a few elsewhere around the country, where their devices blew up while they were in the car. "Arming" it, no doubt.
One was by Pudlik's Liquor, and it took out a wall of the store as well as the digruntled persons, although the authorities said that the liquor store was not the intended target. I guess that de-disgruntled them, thereby making them gruntled.
Another was by the Chautauqua Auditorium, less than 1/4 mile from where I lived. This one also went off in somebody's lap while they were in the car, and I heard the blast. The Auditorium was not damaged except for a couple of windows and minor stuff. I had an opportunity after they removed the Police Line tape to wander around up there, and the birds were still picking stuff out of the trees and pecking at unknown stuff in the grass. There were many little grease spots on the paved areas and sidewalks even after they cleaned up the mess.
One successful bombing was the memorial locomotive and train in Central Park in Boulder. Kind of made a mess of the caboose. The locomotive was OK, though.
</completely off topic>
:stopjack:
The static in winter around here, where it's not rare to see 5%RH, is a bear. I took to approaching all light switches and such with some keys, or a pen, or something, so the shock was dissipated through the key's contact area on your skin instead of directly. A good half-inch crack! was frequent, espcially when it went to 10°F and the moisture froze out of the air. It's fun to light a flourescent tube from a desk lamp by touching it to a grounded article after shuffling across the carpet in my "favorite" spark-producing slippers. Below 10% RH your eyeballs start a-shriveling and your nose needs a-pickin'. Some wiseguy once suggested the nose-pickin' position as the Official Colorado Salute.
(http://www.warmphotos.net/img/cool/nose/nose01.jpg)
(http://manginamonologues.files.wordpress.com/2007/12/mona-lisa-picking-nose.jpg)
Yes, Welcome to Colorado, Mr. President. (Probably photoshopped, but funny anyhow.)
(http://thefinereport.com/wp-content/uploads/2012/04/Obama-picking-nose-300x248.jpg)
Well, come to think of it, that was off-topic, too. Jes' ramblin'. :shaka:
Terry, 230RN
P.S. The Chautauqua Auditorium is a delightful old building with incredibly good acoustics because, they say, of the hundreds of wooden beams supporting the roof. Heard many delightful concerts there. The bombers parked around to the left side of the building in this photo. There are lots more trees around it now. Beats me how blowing up this building would enhance respect for those hotheads, but there's no logic in extremist's heads anyhow.
http://www.bodinrealty.com/xSites/Agents/BodinRealtyInternational/Content/UploadedFiles/Chautauqua-auditorium-boulder-color.jpg (http://www.bodinrealty.com/xSites/Agents/BodinRealtyInternational/Content/UploadedFiles/Chautauqua-auditorium-boulder-color.jpg)