2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: drck1000 on October 13, 2022, 09:55:22 AM
-
Sharing experiences and recommendations on subcompact pistols, like Glock 43/43x/48, Sig P365 variants, etc.
I recently bought a Glock 43x and 48 MOS. Got the 43x milled for the Holosun K footprint and put on an EPS Carry. With the micro/slimline pistols becoming a lot more popular, I wanted to see for myself. I have shot many in the past, but just a mag or two of friends' guns or other folks who came to various range days.
For CCW, my primary is Glock 19. I have tons of rounds with them in training, classes, and some competition. I have carried it here and there when/where legal. While I can conceal it just fine, I assumed a smaller pistol would/could be a benefit. So wanted to try for myself.
I have about 300 or so rounds with the 43x. I have a couple of IWB holsters and a OWB holster. Still getting used to shooting it. Overall, I enjoy shooting the 43x, but shoot the 19 way better. I think mostly due to the grip stippling I have on the 19, as well as the width of the 19 allows for a more comfortable or maybe familiar grip. I plan to get the either the 43x or 48 stippled soon and see if that changes things. I can get a comfortable grip on the 43x, but seems like my hands are fighting for space. Results on paper are also way better with the 19, but assume mostly because of familiarity.
No malfunctions or other issues with the 43x so far. The only issue I noticed was that when I changed out the mag release to a Vickers, the mags wouldn't drop as well as with the stock release. I have the Vickers on all of my other Glocks (19, 17, 34) and they work well. For the 43x, the profile seemed lower than the stock. So I went back to the stock mag release.
I've shot the P365 side-by-side with the 43x. The P365 XL or Macro do interest me a little, but will likely stick with the 43x and see how about 1000 rounds go. I had hoped to shoot the 43x in a match in carry optics, but that won't happen for a while. . . :(
-
The only gun I CCW'd was a VP9 w/WML. Then when I got my Shield Plus, there was a noticeable difference in carrying it. The Shield is lighter, thinner, and shorter. So overall less bulky. And this is even with the IWB sidecar for the mag. I find the Shield IWB set up still less bulky. So I would assume this goes with all compact/subcompact pistols.
I'm not 1 of those who would not carry a gun due to the humbug (bulkyness) of carrying it. To me the benefits outweigh the cons.
Shooting wise between the 2, on paper the VP9 should be easier to shoot. But in practice, eh Indian problems.
-
The only gun I CCW'd was a VP9 w/WML. Then when I got my Shield Plus, there was a noticeable difference in carrying it. The Shield is lighter, thinner, and shorter. So overall less bulky. And this is even with the IWB sidecar for the mag. I find the Shield IWB set up still less bulky. So I would assume this goes with all compact/subcompact pistols.
I'm not 1 of those who would not carry a gun due to the humbug (bulkyness) of carrying it. To me the benefits outweigh the cons.
Shooting wise between the 2, on paper the VP9 should be easier to shoot. But in practice, eh Indian problems.
I used to CCW a 17. That was all I had. I did have a HK USP 40 Compact with holsters and stuff, but didn't carry it after getting my 17. This was when I still lived in WA state.
It's always the arrow bow, duh. . .
-
Resurrecting an old thread.
Qualified with the 43x, along with the 17.5 for the Honolulu CCW course of fire last week. Have been spending more time shooting the 43x overall, and also eventually want to shoot it in an USPSA match. The setups between the 43x and 17.5 are quite similar, in Overwatch trigger, EPS (carry for 43x and regular for 17.5), and laser stippled grip. The 17.5 has a Streamlight TLR7A, and the 43x is the no rail version.
I have maybe 3k rounds on this 17.5 and maybe 200 rounds on the 43x. I shot the qual clean with the 17.5 and at a decent pace (and cold). Followed with (3)C with the 43x with also a decent pace. No surprise there as I have a lot more time with the 17.5 and it fits my hands better. I do want to spend more time with the 43x moving forward. The wider grip of the 17.5 makes it easier to have "stronger clamping" support hand grip, in addition to just being more comfortable with shooting the full sized framed Glocks.
For CCW considerations, while I can conceal the 17.5 just fine, I've found the 43x is easier in many ways and more comfortable. The shorter barrel length doesn't contribute to trouble with concealment (as noted by many on YT), as well as being more comfortable when sitting. Also makes it easier with to pee (added that for CMO) without removing the pistol.
Overall happy with the 43x as I shoot it more and more.
-
i think they prefer to be referred to as micronesian...
Sharing experiences and recommendations on subcompact pistols, like Glock 43/43x/48, Sig P365 variants, etc.
I recently bought a Glock 43x and 48 MOS. Got the 43x milled for the Holosun K footprint and put on an EPS Carry. With the micro/slimline pistols becoming a lot more popular, I wanted to see for myself. I have shot many in the past, but just a mag or two of friends' guns or other folks who came to various range days.
For CCW, my primary is Glock 19. I have tons of rounds with them in training, classes, and some competition. I have carried it here and there when/where legal. While I can conceal it just fine, I assumed a smaller pistol would/could be a benefit. So wanted to try for myself.
I have about 300 or so rounds with the 43x. I have a couple of IWB holsters and a OWB holster. Still getting used to shooting it. Overall, I enjoy shooting the 43x, but shoot the 19 way better. I think mostly due to the grip stippling I have on the 19, as well as the width of the 19 allows for a more comfortable or maybe familiar grip. I plan to get the either the 43x or 48 stippled soon and see if that changes things. I can get a comfortable grip on the 43x, but seems like my hands are fighting for space. Results on paper are also way better with the 19, but assume mostly because of familiarity.
No malfunctions or other issues with the 43x so far. The only issue I noticed was that when I changed out the mag release to a Vickers, the mags wouldn't drop as well as with the stock release. I have the Vickers on all of my other Glocks (19, 17, 34) and they work well. For the 43x, the profile seemed lower than the stock. So I went back to the stock mag release.
I've shot the P365 side-by-side with the 43x. The P365 XL or Macro do interest me a little, but will likely stick with the 43x and see how about 1000 rounds go. I had hoped to shoot the 43x in a match in carry optics, but that won't happen for a while. . . :(
-
I shot my Glock 48 w/EPS Carry on my Taccon trip. It was the first time I used it for training and first event using a red dot. I was able to make good hits from the draw up to 35 yards. I'm still a bit slow up close, for acquiring the dot. I did pickup a couple of bad habits, I tend to shoot slightly left under speed, probably due to the smaller grip. And I tilt my head to the gun side to acquire the dot I think. Gun ran flawlessly over 250 rounds. It's my regular CCW gun. I brought a Glock 43 as a backup and I use it for deep concealment. That gun is harder to shoot well and takes a lot of practice. It's adequate out to 15 yards and difficult at 25 yards.
I gave up on appendix carry as it can be painful sitting down, I might try it again after I lose weight. The C&G holster was fine and I CC it around Dallas.
The common guns at Taccon were Glock 43x, Glock 19, and Sig 365s, with 2/3rds using optics and doing appendix carry. A bunch had Shields and a few people had Glock 43s.
-
I shot my Glock 48 w/EPS Carry on my Taccon trip. It was the first time I used it for training and first event using a red dot. I was able to make good hits from the draw up to 35 yards. I'm still a bit slow up close, for acquiring the dot. I did pickup a couple of bad habits, I tend to shoot slightly left under speed, probably due to the smaller grip. And I tilt my head to the gun side to acquire the dot I think. Gun ran flawlessly over 250 rounds. It's my regular CCW gun. I brought a Glock 43 as a backup and I use it for deep concealment. That gun is harder to shoot well and takes a lot of practice. It's adequate out to 15 yards and difficult at 25 yards.
I gave up on appendix carry as it can be painful sitting down, I might try it again after I lose weight. The C&G holster was fine and I CC it around Dallas.
The common guns at Taccon were Glock 43x, Glock 19, and Sig 365s, with 2/3rds using optics and doing appendix carry. A bunch had Shields and a few people had Glock 43s.
I’ve found that with the 43x, I have to be more conscious of my grip. Tendency is to either not have sufficient clamping or over grip with right hand. Interesting that in the CCW qual I shot recently two of the Charlies were 12 o’clock.
In classes, seeing a lot of Sig micro pistols, with some Glock 43x and occasional 48.
-
i think they prefer to be referred to as micronesian...
microclips
-
huh?
I’ve found that with the 43x, I have to be more conscious of my grip. Tendency is to either nobly have sufficient clamping or over grip with right hand. Interesting that in the CCW qual I shot recently two of the Charlies were 12 o’clock.
In classes, seeing a lot of Sig micro pistols, with some Glock 43x and occasional 48.
-
huh?
if you actually owned guns, I would explain to you
-
lul
if you actually owned guns, I would explain to you
-
Adding a 48 MOS into the rotation. I've had the gun for a while, but was planning on selling it. Since I'm shooting the 43x more and more, using the 48 MOS for backup as well as testing. For now, mainly trying/testing the Shield mags with their mag catch. Going with an EPS Carry to mostly match the EPS Carry on the 43x, but one difference is the 43x is direct milled. I'm also trying an Apex flat shoe and TTI spring kit based on recommendations. Eventually, intent (or maybe goal) is to shoot the 48 MOS in pistol matches. While range opportunities are back, days are limited from previous years prior to shut down.
-
I have a G19 and a P365 (the regular one) for ccw.
the P365 is much easier to conceal bc its smaller. I'll carry mostly in a fanny pack.
I have 2 slides for it. 1 with holosun 507k green dot, and 1 with just the iron night sights.. if I pocket carry, I'll use the slide with the iron sights bc easier getting it in and out of the pocket. I like the mag with the pinky extension bc easier to grip, my pinky isn't hanging off the grip
I can shoot the G19 better but the Sig is easier to conceal so that's why I prefer the Sig. if we had open carry I would probably go with the Glock or my 3" GP100
I also have Hellcat but I haven't shot it much. but it shoots similarly to the P365
-
I wonder if there's a huge diff in carrying diff guns. I only carry 1 gun so my press out is the same, mechanics are the same, RDS is the same. Compare this if someone carrys say 3 diff guns a week.
I noticed a diff when I function check MRs. CMO's 365XL, we have the same RDS, but when pressing out, it's much different from my shield. Or is it the same for all Glocks due to the angle of the grip?
-
I wonder if there's a huge diff in carrying diff guns. I only carry 1 gun so my press out is the same, mechanics are the same, RDS is the same. Compare this if someone carrys say 3 diff guns a week.
I noticed a diff when I function check MRs. CMO's 365XL, we have the same RDS, but when pressing out, it's much different from my shield. Or is it the same for all Glocks due to the angle of the grip?
Good topic. Personally, I've come full circle (actually many times around the circle :facepalm:). From sticking with platform, to trying a range (P320, PPQ/PDP, CZ 75 P-10, etc) and back to one platform. At least right now, I'm focusing on reduction of platforms, mainly grip angle. To build and ingrain index, especially important (IMO) concept for RDS. Experienced that firsthand one training day when I was shooting a lot with my 17.5, then a buddy had me shoot his Sig P320 for a test stage right afterwards. Yeah, after some dry fire and reps, I could have adjusted. However, first draws were "different", like I think you experienced. One buddy that I shoot matches with is the opposite. Shoots a P320 and won't touch a Glock :rofl:
For me, the indexing aspect between 17.5 and 43x/48 is the same. The slight tweaks in the grip between the two I'll say still in process. Trying to spend more the slimlines, which is one reason I want to shoot them in a match.
Aside #pressoutandgotowork ;D
-
Finally got the 48 MOS setup and zeroed. I had the wrong CHPWS plate, and I was waiting on some work on the frame to be finished. Zeroed and shot over the past week and I'm liking it. Using the 48 MOS to test Shield Arms mags (blocked to 10 :( ) and no issues in around 200 rounds. I really like the Shield mags over the OEM for many reasons and will likely used them with the 43x.
The 43x is direct milled for EPS Carry, and the 48 MOS has CHPWS plate with EPS Carry. Side by side, the optic heights about about the same. I installed the same model Dawson iron sights on both and the amount that they stick up in the window seems about the same (very slightly above bottom of window, which I like). I will have to get a replacement front sight as the POI is about 2.5-3" low at 15 yards. Minor nuisance for now, but eventually envision the 48 MOS as back up CCW when on the mainland.
Will continue to spend more time with both the 43x and 48 MOS. Will eventually shoot the 48 in a pistol match. When I shot the 48 MOS and in the same range session with my usual 34.4 competition pistol, the 48 MOS is definitely less forgiving in many ways, which is what I expected. Hopefully more time with the 43x/48 will help.
-
If anybody on Maui can shoot a LCP or similar halfway decent then I'd love to have you show me. I bought an LCP Max that turns me straight into Barney Fife when I hold it. Straight up menace, I'm seriously starting to think it's defective. I even got the Mantis dryfire training aids, they say my grip is great and the laser always hits where I aim it, but with live ammo I can't even tell where all the bullets go.
-
If anybody on Maui can shoot a LCP or similar halfway decent then I'd love to have you show me. I bought an LCP Max that turns me straight into Barney Fife when I hold it. Straight up menace, I'm seriously starting to think it's defective. I even got the Mantis dryfire training aids, they say my grip is great and the laser always hits where I aim it, but with live ammo I can't even tell where all the bullets go.
Dry fire (with Mantis) not showing up in live fire results, correct? Assuming yes, have you tried ball & dummy drill?
I've found that grip with micros is less forgiving than full size. But for me, the gap is closing as I spend more time with the 43x/48, both live and dry fire.
A shooting buddy is big on magwells for the 43x for grip considerations. I haven't tried, yet.
-
Dry fire (with Mantis) not showing up in live fire results, correct? Assuming yes, have you tried ball & dummy drill?
I've found that grip with micros is less forgiving than full size. But for me, the gap is closing as I spend more time with the 43x/48, both live and dry fire.
A shooting buddy is big on magwells for the 43x for grip considerations. I haven't tried, yet.
My number one suggestion would be to try live fire with your trigger in different spots on your finger. As with Glocks, often the shooter's hand is not perfectly sized for the standard grip, and it often causes a right handed person to push the trigger (and the muzzle) down and to the left.
I was able to overcome that mostly by attaching the grip backstrap on my Glocks to make the grip deeper, so the knuckle of my trigger finger is more in line with the rear of the trigger.
I discovered this by sitting very still and very slowly dry firing the Glocks. As the trigger fired, i saw the muzzle end of the gun move left. After trying to compensate with different finger/knuckle positions on the trigger, I finally remembered the backstraps. Viola!
So, first identify the problem. If your trigger finger is moving the muzzle, you need to then identify why. Maybe adjusting your weak hand grip will prevent it? Or use the isometric grip where you press the hands against the sides of the gun but have a more relaxed grip. Sometimes holding the grip way too tight creates a situation where you're so focused on grip pressure you miss everything else.
https://youtu.be/qGkLM8uCuNA
-
If anybody on Maui can shoot a LCP or similar halfway decent then I'd love to have you show me. I bought an LCP Max that turns me straight into Barney Fife when I hold it. Straight up menace, I'm seriously starting to think it's defective. I even got the Mantis dryfire training aids, they say my grip is great and the laser always hits where I aim it, but with live ammo I can't even tell where all the bullets go.
Let a friend shoot your gun and see what they can do. I've shot bad and had a much better shooter use the gun and it worked fine. Indian, not the arrow.
Start at 3 yards. Until u can put all 10rds inside a golf ball, don't increase the distance. Then go to 5 yards and same. Then 7 and tangerine. Then 10 yards and orange. Or something like this and do slow fire.
Then increase speed if you can constantly get golf ball grouping or orange groupings.
-
My number one suggestion would be to try live fire with your trigger in different spots on your finger. As with Glocks, often the shooter's hand is not perfectly sized for the standard grip, and it often causes a right handed person to push the trigger (and the muzzle) down and to the left.
I was able to overcome that mostly by attaching the grip backstrap on my Glocks to make the grip deeper, so the knuckle of my trigger finger is more in line with the rear of the trigger.
I discovered this by sitting very still and very slowly dry firing the Glocks. As the trigger fired, i saw the muzzle end of the gun move left. After trying to compensate with different finger/knuckle positions on the trigger, I finally remembered the backstraps. Viola!
So, first identify the problem. If your trigger finger is moving the muzzle, you need to then identify why. Maybe adjusting your weak hand grip will prevent it? Or use the isometric grip where you press the hands against the sides of the gun but have a more relaxed grip. Sometimes holding the grip way too tight creates a situation where you're so focused on grip pressure you miss everything else.
SNIP
Was that directed at me? or Begle?
If at me, apples and potatoes comparing 43x/48 and 19/17 etc. I get that you're saying and yeah, I've tried/experimented and noticed. But I wasn't referring to forgiveness on trigger pull/manipulations. More generally differences in grip sizes and individual grip/hands.
The 43x & 48 don't come with backstraps, at least mine didn't. I believe they have aftermarket.
ETA: And yeah. Dry firing, esp with red dots, you can def see more of when the gun is being "affected" but grip pressures, trigger pulls, etc.
-
Let a friend shoot your gun and see what they can do. I've shot bad and had a much better shooter use the gun and it worked fine. Indian, not the arrow.
Start at 3 yards. Until u can put all 10rds inside a golf ball, don't increase the distance. Then go to 5 yards and same. Then 7 and tangerine. Then 10 yards and orange. Or something like this and do slow fire.
Then increase speed if you can constantly get golf ball grouping or orange groupings.
#aboveaverage
-
https://www.metmuseum.org/art/collection/search/624385
My number one suggestion would be to try live fire with your trigger in different spots on your finger. As with Glocks, often the shooter's hand is not perfectly sized for the standard grip, and it often causes a right handed person to push the trigger (and the muzzle) down and to the left.
I was able to overcome that mostly by attaching the grip backstrap on my Glocks to make the grip deeper, so the knuckle of my trigger finger is more in line with the rear of the trigger.
I discovered this by sitting very still and very slowly dry firing the Glocks. As the trigger fired, i saw the muzzle end of the gun move left. After trying to compensate with different finger/knuckle positions on the trigger, I finally remembered the backstraps. Viola!
So, first identify the problem. If your trigger finger is moving the muzzle, you need to then identify why. Maybe adjusting your weak hand grip will prevent it? Or use the isometric grip where you press the hands against the sides of the gun but have a more relaxed grip. Sometimes holding the grip way too tight creates a situation where you're so focused on grip pressure you miss everything else.
-
https://www.metmuseum.org/art/collection/search/624385
clips
-
#guudenuff
#aboveaverage
-
tips
clips
-
#guudenuff
#brah
#thisonetimeat
-
#rhymeswithfrontsight
#brah
#thisonetimeat
-
Was that directed at me? or Begle?
If at me, apples and potatoes comparing 43x/48 and 19/17 etc. I get that you're saying and yeah, I've tried/experimented and noticed. But I wasn't referring to forgiveness on trigger pull/manipulations. More generally differences in grip sizes and individual grip/hands.
The 43x & 48 don't come with backstraps, at least mine didn't. I believe they have aftermarket.
ETA: And yeah. Dry firing, esp with red dots, you can def see more of when the gun is being "affected" but grip pressures, trigger pulls, etc.
Not at anyone in particular. Just a suggestion spelling out what helped me identify the problem.
I was interrupted mid-post, so i skipped over one other anecdote: I had a Glock 42 .380 Auto. Micro sounds too clinical. This thing was tiny!!
i let several very good shooters try it at the pistol range. They were lucky if 1 out of 5 shots landed anywhere on the target.
I was able to get 4-5 on target, and at least half of the total were acceptably close to the bullseye. Had to manage expectations. Can't expect quarter size groupings from every pistol you use.
I'd never use the G42 at 25 yds for real, or even 15 yards. It's designed for up close and personal encounters.
What i'm getting at is it takes practice and a lot of analysis if you're not getting the results you need. Maybe my experiences are different, but maybe someone else can find something useful from reading about them.
:shaka:
(https://i.imgur.com/euIsJH7.gif)
-
Not at anyone in particular. Just a suggestion spelling out what helped me identify the problem.
I was interrupted mid-post, so i skipped over one other anecdote: I had a Glock 42 .380 Auto. Micro sounds too clinical. This thing was tiny!!
i let several very good shooters try it at the pistol range. They were lucky if 1 out of 5 shots landed anywhere on the target.
I was able to get 4-5 on target, and at least half of the total were acceptably close to the bullseye. Had to manage expectations. Can't expect quarter size groupings from every pistol you use.
I'd never use the G42 at 25 yds for real, or even 15 yards. It's designed for up close and personal encounters.
What i'm getting at is it takes practice and a lot of analysis if you're not getting the results you need. Maybe my experiences are different, but maybe someone else can find something useful from reading about them.
:shaka:
Yeah, gotcha. When I first got the 43x, I was mixed. Between "this is pretty good" at times to "meh". Having spending more time with them, I'm appreciating them more. Especially for CCW for Hawaii. I typically carried 19 and 17s, but def see the benefits of these smaller frames.
I've shot the 42 and original 43 and can't say I was a fan. Think mostly b/c the short grips and pinky off/overhang. They were ok, and maybe I didn't give them a chance. I will be shooting the 48 in matches soon, so will see how that goes.
-
I never shot a LCP, but that thing makes my Glock 43 look huge. Even the dainty Glock 42 is a fair bit larger than the LCP. I can shoot the Glock 43 okay at 15 yards with good center mass hits and at 25 yards if I take my time and really concentrate. It took me quite a bit of practice to get there. For the LCP's size, weight, and relatively long/heavy trigger pull 7 yards for center mass hits and 10 yards for slow fire is what you can expect with lots of practice. Maybe you're expecting too much out of the gun.
Do 300 dryfire presses and shoot 300 rounds out of it and that should get you to adequate proficiency with it.
Center mass hits as in grouping inside of a letter size sheet of paper at 7 yards would be a good accomplishment for that gun.
-
Witnessed someone shooting the LCP for the Hawaii CW qual. They shot fine (passed), but their holster was crap. Apparently tough to find holsters for that pistol. It is quite tiny and capacity was quite low, believe 6+1. I didn't shoot the gun, but the trigger pull seemed heavy and long. I guess having pocket carry in mind.
-
Been shooting the 48 MOS more lately, including in a local match. Was using Shield mags (blocks to 10 of course) and will be going back to OEM mags, at least for now. At least for now. I did a bunch of research on the Shield mags prior to trying, and even with the Gen 3s, seems to be hit or miss. Was willing to try for myself. I wasn't getting that many malfunctions, but enough to at least take a pause. I am thinking it might be a matter of springs and/or other things having to work in, but even then, not sure if I'll be going back. I intend on shooting the 48 a lot more in matches over the next many months here and there. I will eventually get back to trying/testing the Shield mags, but for now, they are on the bench.
I've had the 43x for a while and was using OEM mags. I had recently switched to the Shield mags with that gun and it functioned fine. I did notice a slight hiccup going into battery when I was testing Gold Dots, but otherwise it functioned fine with both OEM (100%) and Shield mags. That's one of the guns on my HPD CCW, so will have to be sure before going with Shield mags on that gun moving forward.
-
Been shooting the 48 MOS more lately, including in a local match. Was using Shield mags (blocks to 10 of course) and will be going back to OEM mags, at least for now. At least for now. I did a bunch of research on the Shield mags prior to trying, and even with the Gen 3s, seems to be hit or miss. Was willing to try for myself. I wasn't getting that many malfunctions, but enough to at least take a pause. I am thinking it might be a matter of springs and/or other things having to work in, but even then, not sure if I'll be going back. I intend on shooting the 48 a lot more in matches over the next many months here and there. I will eventually get back to trying/testing the Shield mags, but for now, they are on the bench.
I've had the 43x for a while and was using OEM mags. I had recently switched to the Shield mags with that gun and it functioned fine. I did notice a slight hiccup going into battery when I was testing Gold Dots, but otherwise it functioned fine with both OEM (100%) and Shield mags. That's one of the guns on my HPD CCW, so will have to be sure before going with Shield mags on that gun moving forward.
Are those mags in stock all the time? WHen I looked into getting a G43 (6rd gun), the 10rd Shield mags were often out of stock. This was why it fell off my CCW list. Plus they make a G43X.
-
Are those mags in stock all the time? WHen I looked into getting a G43 (6rd gun), the 10rd Shield mags were often out of stock. This was why it fell off my CCW list. Plus they make a G43X.
I dunno about in stock all the time, but I was able to get them without much waiting. I bought what I have in a few different "batches", but I think only once was where they were out of stock when I was looking. After I got my first (2) to start with, I picked more up when they were back in stock.
I do like/appreciate the (15) round capacity/capability, but not with the issues I've been hearing about and experiencing personally. I have seen a bunch of videos claiming "no issues", but not sure how reliable those reports are, and say if folks say shot a box of (50) and called it guud enuff.
-
Been shooting my 48 variant with a ported barrel and slide a lot more lately in range and general training sessions. One item of note is be careful of magwells that have a wedge attachment method. For me, they appear to induce malfunctions with loading, where rounds get stuck on the feedramp. Tried various action springs, since my ported setup is aftermarket slide and barrel. Finally narrowed it down to the magwell. I primarily use the magwell for the grip "enhancement" aspect, vice reloading. I can grip the 43x/48 frame ok without, but a shooting buddy mentioned how he likes the magwell for the grip aspect, so I decided to give it a try. Since this 48 slide is ported, I'd be in USPSA Open class anyways, but not a driving factor.
Did more research and seems issues with magwells with the 43x/48 is pretty common. Many see issues with mags no dropping free in addition to what I've experienced. Where the wedge attachment, or other means, can cause the frame to flex slightly. I did notice it with SLR and Empire Katana magwells. You/one can get the pressures "just right", but I've then noticed the plug moves, which I suspect then prevents the mags from seating properly, or otherwise places pressures on the mag that causes issues.
I have one magwell that doesn't have the wedge attachment, so will be testing that more. If I experience issues, I may give up on magwells. My 43x EDC currently doesn't have a magwell. I've tested the 48 with magwell and it doesn't drastically affect printing. At least with darker colored shirts, which I don't really wear lighter color shirts when carrying anyways.
-
are
Been shooting my 48 variant with a ported barrel and slide a lot more lately in range and general training sessions. One item of note is be careful of magwells that have a wedge attachment method. For me, they appear to induce malfunctions with loading, where rounds get stuck on the feedramp. Tried various action springs, since my ported setup is aftermarket slide and barrel. Finally narrowed it down to the magwell. I primarily use the magwell for the grip "enhancement" aspect, vice reloading. I can grip the 43x/48 frame ok without, but a shooting buddy mentioned how he likes the magwell for the grip aspect, so I decided to give it a try. Since this 48 slide is ported, I'd be in USPSA Open class anyways, but not a driving factor.
Did more research and seems issues with magwells with the 43x/48 is pretty common. Many see issues with mags no dropping free in addition to what I've experienced. Where the wedge attachment, or other means, can cause the frame to flex slightly. I did notice it with SLR and Empire Katana magwells. You/one can get the pressures "just right", but I've then noticed the plug moves, which I suspect then prevents the mags from seating properly, or otherwise places pressures on the mag that causes issues.
I have one magwell that doesn't have the wedge attachment, so will be testing that more. If I experience issues, I may give up on magwells. My 43x EDC currently doesn't have a magwell. I've tested the 48 with magwell and it doesn't drastically affect printing. At least with darker colored shirts, which I don't really wear lighter color shirts when carrying anyways.
-
are
???
*feeding
In before more “corrections”
-
focus
"issues with magwells with the 43x/48 is pretty common."
???
*feeding
In before more “corrections”
-
Been shooting my 48 variant with a ported barrel and slide a lot more lately in range and general training sessions. One item of note is be careful of magwells that have a wedge attachment method. For me, they appear to induce malfunctions with loading, where rounds get stuck on the feedramp. Tried various action springs, since my ported setup is aftermarket slide and barrel. Finally narrowed it down to the magwell. I primarily use the magwell for the grip "enhancement" aspect, vice reloading. I can grip the 43x/48 frame ok without, but a shooting buddy mentioned how he likes the magwell for the grip aspect, so I decided to give it a try. Since this 48 slide is ported, I'd be in USPSA Open class anyways, but not a driving factor.
Did more research and seems issues with magwells with the 43x/48 is pretty common. Many see issues with mags no dropping free in addition to what I've experienced. Where the wedge attachment, or other means, can cause the frame to flex slightly. I did notice it with SLR and Empire Katana magwells. You/one can get the pressures "just right", but I've then noticed the plug moves, which I suspect then prevents the mags from seating properly, or otherwise places pressures on the mag that causes issues.
I have one magwell that doesn't have the wedge attachment, so will be testing that more. If I experience issues, I may give up on magwells. My 43x EDC currently doesn't have a magwell. I've tested the 48 with magwell and it doesn't drastically affect printing. At least with darker colored shirts, which I don't really wear lighter color shirts when carrying anyways.
Would you carry the G48? I ask cause with a ported barrel, one has to be aware of the gasses coming out. So if on your back and the handgun is close to you in an awkward position, you can harm yourself. Or if your hand is holding on to your slide, etc...
-
focus
"issues with magwells with the 43x/48 is pretty common."
:facepalm:
-
Would you carry the G48? I ask cause with a ported barrel, one has to be aware of the gasses coming out. So if on your back and the handgun is close to you in an awkward position, you can harm yourself. Or if your hand is holding on to your slide, etc...
I have a stock 48 slide as well. I’d carry that no worries. For ported? Not my preference, but I’m not that worried about jacket separation. I’ve tested a different gun with ported barrel and the ports are smaller (but more of them) and specifically designed to mitigate the jacket separation. You get some hot gasses and some carbon flakes, but haven’t seen jacket material. I haven’t tested with the 48 though.
Only recently got into ported pistols. Not intended for CCW, for now. Though I know a few who do carry ported pistols. Some aftermarket and some like S&W.
Many worry about the fireball effect from the ports. I’ve noticed when shooting indoors, but can’t say if it would “ruin” vision in low light. Though I think the risks are exaggerated.
-
If anybody on Maui can shoot a LCP or similar halfway decent then I'd love to have you show me. I bought an LCP Max that turns me straight into Barney Fife when I hold it. Straight up menace, I'm seriously starting to think it's defective. I even got the Mantis dryfire training aids, they say my grip is great and the laser always hits where I aim it, but with live ammo I can't even tell where all the bullets go.
Just going off the dimensions and heavy trigger on a LCP Max ...
Max range for most shooters on that gun would be 3 to 7 yards for quick defensive shots into the vitals of a silhouette. Maybe 10 yards for an experienced shooter. It's a small gun so its going to be difficult to shoot even for experienced shooters. Also the recoil is harsh on that gun so it will be different between dry and live fire.
To get better, buy 10 of these snap caps. https://www.amazon.com/Action-Trainers-Orange-Rounds-ACP/dp/B00GD2I6K0
At the range, load live and dummy rounds randomly into 2 magazines, then randomize the magazines, load, and fire. When you press the trigger on a dummy the sights shouldn't move. Do a quick tap rack for misfire drill practice and continue. Also do it from the draw...draw and fire 1, draw and fire 2, draw and fire 3 rounds and repeat. Do that with 6 magazines for each range session, about 60 trigger pulls. Do that for 3 range sessions for 180 trigger pulls worth.
You should be significantly better and accurate.
-
I have a stock 48 slide as well. I’d carry that no worries. For ported? Not my preference, but I’m not that worried about jacket separation. I’ve tested a different gun with ported barrel and the ports are smaller (but more of them) and specifically designed to mitigate the jacket separation. You get some hot gasses and some carbon flakes, but haven’t seen jacket material. I haven’t tested with the 48 though.
Only recently got into ported pistols. Not intended for CCW, for now. Though I know a few who do carry ported pistols. Some aftermarket and some like S&W.
Many worry about the fireball effect from the ports. I’ve noticed when shooting indoors, but can’t say if it would “ruin” vision in low light. Though I think the risks are exaggerated.
Next open shoot, lets do a port test. Hold a paper above it and see what happens. In the filming of the film DOOM, they had their firearm trainer explain that even though blanks are used, the gases will cause damage if the rifle is shot close enough to someone. He shot a styrofoam maniquene head to show the blast effect. IDK if this was a "plugged" barrel that hollywood uses or a non-plugged one, but he got his point across.
-
Next open shoot, lets do a port test. Hold a paper above it and see what happens. In the filming of the film DOOM, they had their firearm trainer explain that even though blanks are used, the gases will cause damage if the rifle is shot close enough to someone. He shot a styrofoam maniquene head to show the blast effect. IDK if this was a "plugged" barrel that hollywood uses or a non-plugged one, but he got his point across.
As styrofoam what? :rofl:
I know what you meant, but will see if Mr Tourette’s comments…
The gasses will rip paper. When I test, I’m looking to differentiate between gasses, carbon flakes, and jacket material. Not saying the gasses can’t hurt or even break skin, just different. I’ve read some folks test on fruit. I’ve tested with leftover ballistic gel on another gun, but not with the 48 ported slide.
-
As styrofoam what? :rofl:
I know what you meant, but will see if Mr Tourette’s comments…
The gasses will rip paper. When I test, I’m looking to differentiate between gasses, carbon flakes, and jacket material. Not saying the gasses can’t hurt or even break skin, just different. I’ve read some folks test on fruit. I’ve tested with leftover ballistic gel on another gun, but not with the 48 ported slide.
cttsolutionsllc's wife (IG post) just showed a vid between her shooting a G43X without port and then another one with port. The recoil difference is HUGE. She's like 5'1; 115lbs.
Although the gas goes up, I wonder if you were to fire from the hip how it would be. Like any injury for the area next to the slide? Or to your face cause the gas is going up like 6 inches (fireball).
-
cttsolutionsllc's wife (IG post) just showed a vid between her shooting a G43X without port and then another one with port. The recoil difference is HUGE. She's like 5'1; 115lbs.
Although the gas goes up, I wonder if you were to fire from the hip how it would be. Like any injury for the area next to the slide? Or to your face cause the gas is going up like 6 inches (fireball).
Ya. He (Pannone) does a lot of testing with the micro pistols. I was chatting with him via DM a while back when I started shooting my 43x/48 more. I was thinking of trying to attend one of his deep concealment courses, but timing wasn’t working out.
I understand your concern and/or thought. I did some testing of my own, but not that “direct”… yet. A couple of ways to think about it is when needed, what is more important? Individual choice, as well as adapting techniques all come into play.
As for fireball, for my ported 48 it depends on the ammo. For one of my ported 17 slides, I don’t really notice. Tho my ported 17 slide the ports are angled slightly outward (not vertical), whereas the ports on the 48 are vertical. I have another 17 with ports that I won recently which has vertical ports, but haven’t shot it yet.
-
Ya. He (Pannone) does a lot of testing with the micro pistols. I was chatting with him via DM a while back when I started shooting my 43x/48 more. I was thinking of trying to attend one of his deep concealment courses, but timing wasn’t working out.
I understand your concern and/or thought. I did some testing of my own, but not that “direct”… yet. A couple of ways to think about it is when needed, what is more important? Individual choice, as well as adapting techniques all come into play.
As for fireball, for my ported 48 it depends on the ammo. For one of my ported 17 slides, I don’t really notice. Tho my ported 17 slide the ports are angled slightly outward (not vertical), whereas the ports on the 48 are vertical. I have another 17 with ports that I won recently which has vertical ports, but haven’t shot it yet.
That's cool he responded to your DM's. Unless you talking about another type of "DM". lol.
I get that porting is a choice, but IMO, eliminate that variable. 1 less thing to worry about. Plus adding in you may have to answer to a prosecutor or civil attorney why you ported.
-
Firing from the hip shouldn't be a problem for ported barrels. The top is clear and the gun should be away from your body or slightly canted away to prevent jams anyways.
For experienced shooters, the advantages of porting would be minimal. I can see a bigger advantage for inexperienced or frail shooters that may not have a good grip.
One side benefit of ports no one talks about is retention. Bad guy grabs the muzzle end to take the gun. Just hold the slide forward and fire a round. He's going to let go. :D
-
Firing from the hip shouldn't be a problem for ported barrels. The top is clear and the gun should be away from your body or slightly canted away to prevent jams anyways.
For experienced shooters, the advantages of porting would be minimal. I can see a bigger advantage for inexperienced or frail shooters that may not have a good grip.
One side benefit of ports no one talks about is retention. Bad guy grabs the muzzle end to take the gun. Just hold the slide forward and fire a round. He's going to let go. :D
From personal experience, and a few who shoot/compete often, I think there are definite advantages. Are the advantages minimal to significant? That's relative. Also depends on context and expectations. I've read where some stated "it affects splits", but is that b/c the individual is waiting for sights/dot to be back on target? What level of confirmation are they expecting?
Before porting, I was shooting a Glock 45 with Radian Ramjet & Afterburner in competitions. Is that a significant advantage? I would say noticeable difference between with the Radian and say a stock Glock 45/17/34, but a significant advantage for USPSA competition? I say not significant. One aspect is IF I was looking for higher level of RDS confirmation on say a partial/no-shoot target further away, I can get that faster than without. Is that a significant advantage? I would say not really.
However, in the context of CCW and say 3-5 yards, probably no "significant advantage".
The grip is another aspect. Something that shooting the 43x48 that I've found less forgiving, but also something that I think just takes a bit of time to get used to and/or learn. That's where I started using/testing magwells, for the grip aspect vice reloads. I have found that with my hand size, my pinky is on the grip of the 43x/48, but I like the wedging effect of the magwell with the grip.
-
The grip is another aspect. Something that shooting the 43x48 that I've found less forgiving, but also something that I think just takes a bit of time to get used to and/or learn. That's where I started using/testing magwells, for the grip aspect vice reloads. I have found that with my hand size, my pinky is on the grip of the 43x/48, but I like the wedging effect of the magwell with the grip.
When I first shot the Shield Plus, my pinky would hang off the magwel area. Now it fullly covers it. IDK why. Hand shrank, grip got longer (srs)? High grip has nothing to do with it either as it's always been the same.
-
hand shrank because it doesn't have to manipulate larger objects...
When I first shot the Shield Plus, my pinky would hang off the magwel area. Now it fullly covers it. IDK why. Hand shrank, grip got longer (srs)? High grip has nothing to do with it either as it's always been the same.
-
When I first shot the Shield Plus, my pinky would hang off the magwel area. Now it fullly covers it. IDK why. Hand shrank, grip got longer (srs)? High grip has nothing to do with it either as it's always been the same.
Did you lose weight?
hand shrank because it doesn't have to manipulate larger objects...
You know from extenstive experience?
-
heads
You know from extenstive experience?
-
Did you lose weight?
No. Neither did I lose any grip strength as I still deadlift w/o needing to strap up. Been trying to figure this out for over a year now. Maybe the webbing between the thumb and index finger loss mass, so I can go higher on the grip?