2aHawaii
Tools and Uses => Reloading => Topic started by: MassConfusion on October 19, 2022, 07:49:09 AM
-
I picked up a fluted 24" ar top a few years ago, chambered as a Wylde 1:9. So i was wondering if anyone had fooled around with this particular barrel length and optimizing a load to take advantage of the extra few inches. I have the standard 55gr heads but i wanted to try using 69gr to extend its range out a little bit. Like i said, could use standard load data but was wondering if anyone had tried fiddling with different powders to get a little extra out of each round.
** Was looking at the load data here, could probably figure out the charge size from the powder manufacturer. At least min charge, or pay 20$ and unlock it.
https://www.xxl-reloading.com/Loads/?order=name-asc&p=1&properties=428c77d91e5743e3a8193db65d471d9c%7C0dd8a509366b46359ba576eada20afcb%7C07b372f35969493cb9d92905421ab6f3%7Ca06dbb4d2e1d4f2f81354ef21aaefb52 (https://www.xxl-reloading.com/Loads/?order=name-asc&p=1&properties=428c77d91e5743e3a8193db65d471d9c%7C0dd8a509366b46359ba576eada20afcb%7C07b372f35969493cb9d92905421ab6f3%7Ca06dbb4d2e1d4f2f81354ef21aaefb52)
-
.
-
Whats funny is I picked up another upper at the same time but it was a 5.56 20" with a 1:8. It dependa where you look online too as to who recomends the weight range for the assiciated twist. Ive seen 3 or 4 different head to twist recommendation charts.
-
.