2aHawaii

General Topics => Off Topic => Topic started by: TeamMidori on December 20, 2012, 07:09:55 PM

Title: Just for fun
Post by: TeamMidori on December 20, 2012, 07:09:55 PM
Say for some reason it would become necessary for someone (definitely not me) to bury some metal objects in the backyard. What tips can you offer my "friend" to help "her" from having her treasure chest discovered and also the best way to protect said treasure. Any input on container design and burying depth and location help will be helpful.

Thanks in advance!
Title: Just for fun
Post by: hnl.flyboy on December 20, 2012, 07:14:49 PM
I think buying stainless steel .177 BB's and layering the entire yard with them just 1 inch under the surface might help camouflage it...
Title: Re: Re: Just for fun
Post by: fstbckgt on December 21, 2012, 12:18:46 AM
Bouncing Betty's and maybe some punji sticks.
Title: Re: Just for fun
Post by: DuckFat on December 21, 2012, 11:28:01 AM
Give it to me for safe keeping  :thumbsup:
Title: Just for fun
Post by: TeamMidori on December 21, 2012, 11:52:17 AM
^^ I would but it not mines. It's my friends stuff.
Title: Re: Just for fun
Post by: macsak on December 21, 2012, 12:34:34 PM
riiiiggggghhhhhttttt
"it's for a friend"
:)
these are not the droids you are looking for, move along
:) :) :)

^^ I would but it not mines. It's my friends stuff.
Title: Re: Just for fun
Post by: Pit808 on December 21, 2012, 12:38:48 PM
Old refrigerator?
Title: Just for fun
Post by: TeamMidori on December 21, 2012, 12:48:32 PM
Lol.
Title: Just for fun
Post by: TeamMidori on December 21, 2012, 12:51:16 PM
Bury an old fridge?
Title: Re: Just for fun
Post by: Haoleb on December 21, 2012, 02:01:47 PM
Personally, I would prefer hiding in the attic if you have one, which most homes in hawaii do. You could store alot of stuff up there and easily make it appear in-accesible by framing up sections to be closed off. Or maybe just drywall and paint over an attic access completely so it appears there isint one. Also. between walls. again tons of space. Average wall has 14" x 3.5" x 8' cavity between each stud. Drywall over and paint like nothing ever happened. Then when SHTF and you need to get your stuff kick the drywall in and its ready to go.  ;)
Title: Re: Just for fun
Post by: Heavies on December 21, 2012, 02:17:11 PM
I'd tell 'your friend' to be sure to seal it up good in so the elements don't get to it...
Title: Just for fun
Post by: TeamMidori on December 21, 2012, 02:55:01 PM
Thanks. Ill let "HER" know of all these great ideas!!!
Title: Re: Just for fun
Post by: new guy on December 21, 2012, 03:10:44 PM
.
Title: Re: Just for fun
Post by: crazy cat on December 21, 2012, 04:05:33 PM
PVC works better than metal.

Homemade cosmoline:

In a double boiler, melt wax.  Add an equal amount of axle grease, stir well, paint on while still hot.
Title: Re: Just for fun
Post by: hnl.flyboy on January 10, 2013, 11:57:18 PM
Well, that's embarrassing...I was searching and searching all through my room and could not figure out where my 1911 went.. Flygirl eventually noticed it under a pile of clothes wrapped in rags in a laptop case, along with another handgun I haven't seen in months.  :wacko:  If they do come for my guns, they'll have a hard time finding them!!

I think my guns finally did develop a mind of their own and hid plotting to kill me.............  :shake:

Nah, they probably were crying because I gave all my attention to my Glock (home carry).  I think it's time I went out and fed them.
Title: Re: Just for fun
Post by: 230RN on January 11, 2013, 06:44:57 AM
Plant a tree over the burial site.
Title: Re: Just for fun
Post by: GZire on January 11, 2013, 10:25:40 AM
Thanks. Ill let "HER" know of all these great ideas!!!

If I were you I'd get pretty worried if she starts talking to you about a saw, trash bags, and something that can dissolve flesh............
Title: Re: Just for fun
Post by: Cougar8045 on January 11, 2013, 12:47:52 PM
If I were you I'd get pretty worried if she starts talking to you about a saw, trash bags, and something that can dissolve flesh............
Quicklime. 
Title: Re: Just for fun
Post by: Cougar8045 on January 11, 2013, 12:53:20 PM
If I were worried about somebody in jackboots going around with a metal detector, I'd find dig my hole down to, say, the electrical conduit for something across the yard and bury my treasure as deep under it as I could.  That way even when their metal detector goes off and they dig down, they hit the electrical conduit and figure that must have been what set off the detector without ever digging down past it.  Then again, maybe modern metal detectors can tell the difference between steel and copper?  Idk.
Title: Re: Just for fun
Post by: 230RN on January 11, 2013, 01:36:24 PM
Don't know for sure, but it would seem like burying it vertically would reduce its "metal-detector profile."

Anyone know fer a fact?

Also, burying it a couple of feet under something metallic but innocuous might work.  Like an old rusty pickaxe or shovel or a car driveshaft or sumpin'.

However, I think the radar signature from above will show "disturbed earth" for many years.

That's why I figure planting a tree over it might work.  Or a bunch of new trees all over the property.  Or parking an old tractor or harvester over it.

Jes' spec'latin', jes' fer fun, like OP said.

Terry, 230RN
Title: Just for fun
Post by: TeamMidori on January 11, 2013, 02:03:21 PM
^ hey that sounds like a good idea. If u plant it vertical, it should just be a dot. Right?
Title: Re: Just for fun
Post by: Cougar8045 on January 11, 2013, 03:45:03 PM
Don't know for sure, but it would seem like burying it vertically would reduce its "metal-detector profile."

Anyone know fer a fact?

Also, burying it a couple of feet under something metallic but innocuous might work.  Like an old rusty pickaxe or shovel or a car driveshaft or sumpin'.

However, I think the radar signature from above will show "disturbed earth" for many years.

That's why I figure planting a tree over it might work.  Or a bunch of new trees all over the property. Or parking an old tractor or harvester over it.

Jes' spec'latin', jes' fer fun, like OP said.

Terry, 230RN
Hahaha, back home we've got lots of those, but they're mighty hard to come by in Hawaii!  (Plus the Communists on the local HOA board would most likely poo bricks...which is a plus, in my book!)
Title: Re: Just for fun
Post by: GZire on January 11, 2013, 08:14:13 PM
Don't know for sure, but it would seem like burying it vertically would reduce its "metal-detector profile."

Anyone know fer a fact?

Also, burying it a couple of feet under something metallic but innocuous might work.  Like an old rusty pickaxe or shovel or a car driveshaft or sumpin'.

However, I think the radar signature from above will show "disturbed earth" for many years.

That's why I figure planting a tree over it might work.  Or a bunch of new trees all over the property.  Or parking an old tractor or harvester over it.

Jes' spec'latin', jes' fer fun, like OP said.

Terry, 230RN

I've used detectors before and some are really hit or miss.  I've had cast iron lines just put in a couple of feet below the surface and had 0 return despite being able to connect to a backflow preventor attached to the line.

On the other hand I've used a set of diving rods to accurately place a waterline something line 6' below the surface.

Go figure............
Title: Re: Just for fun
Post by: GZire on January 11, 2013, 08:14:33 PM
Don't know for sure, but it would seem like burying it vertically would reduce its "metal-detector profile."

Anyone know fer a fact?

Also, burying it a couple of feet under something metallic but innocuous might work.  Like an old rusty pickaxe or shovel or a car driveshaft or sumpin'.

However, I think the radar signature from above will show "disturbed earth" for many years.

That's why I figure planting a tree over it might work.  Or a bunch of new trees all over the property.  Or parking an old tractor or harvester over it.

Jes' spec'latin', jes' fer fun, like OP said.

Terry, 230RN

I've used detectors before and some are really hit or miss.  I've had cast iron lines just put in a couple of feet below the surface and had 0 return despite being able to connect to a backflow preventor attached to the line.

On the other hand I've used a set of diving rods to accurately place a waterline something line 6' below the surface.

Go figure............