2aHawaii

General Topics => General Discussion => Topic started by: Tom_G on January 13, 2013, 05:38:10 PM

Title: Cleaner for corrosive ammo
Post by: Tom_G on January 13, 2013, 05:38:10 PM
So, what's your preferred solution?  I've got a couple of thousand rounds of corrosive 8mm ammo inbound. 
Title: Re: Cleaner for corrosive ammo
Post by: Masamune on January 13, 2013, 05:46:58 PM
Windex
Title: Re: Cleaner for corrosive ammo
Post by: Sturmgeschutz on January 13, 2013, 05:49:28 PM
It's best to shoot the bore and breech out with something before you leave the range.

Some use, windex, WD-40, brake cleaner, deep creep, 409,
Hoppe's 9... Unicorn tears.

But i always do a through cleaning beyond the field strip and clean after shooting that stuff, espeally if you get a ruptured case or punctured primer.
Title: Re: Cleaner for corrosive ammo
Post by: AKfortyseven on January 13, 2013, 05:54:45 PM
ive used hoppes#9 for tree years
with no hint of any rust, followed by motor oil
Title: Re: Cleaner for corrosive ammo
Post by: BananaClip on January 13, 2013, 05:58:37 PM
Windex
:thumbsup:
Title: Re: Cleaner for corrosive ammo
Post by: spanner1751 on January 13, 2013, 06:26:32 PM
I use patches with a liquid soap and hot water mixture first, followed by gun oil. Ask the black powder guys at the end of the range what they use, cleanup is similar.   
Title: Re: Cleaner for corrosive ammo
Post by: sic_semper_tyrannis on January 13, 2013, 07:13:12 PM
Break Free. I think it's called CLP by the military. Hoppe's no. 9 or Ballistol are good choices, too.
Title: Re: Cleaner for corrosive ammo
Post by: hnl.flyboy on January 13, 2013, 07:15:07 PM
Windex

+1.  Windex does fine until getting home for a good cleaning.
Title: Re: Cleaner for corrosive ammo
Post by: Mr. Farknocker on January 13, 2013, 08:01:07 PM
good ole' hot tap water running through and a couple of sweeps with a bore brush followed by a blow out with high pressured air and then routine cleaning and oilng.