2aHawaii
General Topics => General Discussion => Topic started by: Dolomite on January 20, 2013, 05:33:45 PM
-
I've been reading a lot about gun oil and gun grease.
What does everyone use on rifles and handguns?
I use slip2000 and Mpro-7 on AR...
What do others use on AK? Handgun? Bolts action?
-
I use Hoppe's no 9 for cleaning and SLIP 2000 for oil. I was thinking about buying some Ballistol, because I keep hearing about how great it is.
-
I like white lithium grease because it's easy to tell when it's dirty and needs to be changed. But plain old axle grease works fine.
-
its probably because im lazy, but i just use CLP for everything. havent had any problems, but im open to other suggestions if they really are better.
-
CLP is fine for an AR, but older rifles like the M1 and M14 need grease.
-
There's so much opinions and recipes for lube. Here's one:
1/2 qt of 10W30
1/2 qt of ATF
8 oz of Hoppes #9
And quite a few lubes are nothing more than something else repackaged i.e. Shooter's Choice = Drydene red grease. Some suggest vacuum tube grease and lubriplate.
-
CLP is fine for an AR, but older rifles like the M1 and M14 need grease.
why?
-
why?
oprod channel
-
oprod channel
well, i have no experience with any of those, so why is it important?
-
No 9 to clean and krex to lube..no issues..
Btw I only shoot .22 if that makes a difference.
-
well, i have no experience with any of those, so why is it important?
to elaborate further and since I'm at a real keyboard ;D that's one of the areas to grease
here's a better explanation http://www.garandgear.com/how-to-grease-your-m1-garand (http://www.garandgear.com/how-to-grease-your-m1-garand)
a better way to understand the M1 is to get one here : www.odcmp.com (http://www.odcmp.com)
-
for thinner runnier lubes i have mpro7,eezox,breakfreee clp, and froglube. definitely like frog lube the best. its a weak cleaner so i consider it just an 'LP' but parts do wipe pretty clean after a good oiling. the smell and the way it works is excellent.
im personally in the market for some actual grease. so many different lubes and greases its confusing, i end up buying multiples and seeing what i like best. right now im leaning towards milcomm tw-25b.
-
to elaborate further and since I'm at a real keyboard ;D that's one of the areas to grease
here's a better explanation http://www.garandgear.com/how-to-grease-your-m1-garand (http://www.garandgear.com/how-to-grease-your-m1-garand)
a better way to understand the M1 is to get one here : www.odcmp.com (http://www.odcmp.com)
i want one, but im holding off on it for now. i want to get into pistols soon.
-
well, i have no experience with any of those, so why is it important?
High friction area and a critical component, the tab on the op-rod that runs in the channel is prone to wear. I’m actually on my second M1 op-rod already ;) Same goes for the M1A/M14.
As far as lube/oil/etc… I use Plasti-Lube on my Garand & M1A for high friction areas, Mpro-7, CLP, or RP Gun oil for surface protection on just about everything else.
For cleaning, Hoppes, Sweets, whatever’s on sale. Big fan of ultra-sonic cleaning as well! :thumbsup:
Ahui hou :shaka:
Boomah
-
I've been using Dexron ATF on my ARs and the thing won't burn off.
-
http://www.garandgear.com/how-to-grease-your-m1-garand (http://www.garandgear.com/how-to-grease-your-m1-garand)
I will read this link later, but toss in my $0.02 having been issued for a short time and experiencing a M1 Garand that was quite worn out possibly from lack of piston lube.
The gas piston on the end of the op rod was shot. The poor rifle was a single shot. I learned to slather Lubriplate (what we were issued back then) all over the end of the piston to be able to go semiauto for a few rounds.
Huge PITA since I was going through ITR* at the time, with lots of advance and fire squad drills, fire while moving at pop up targets, etc.
A separate gas piston that can be replaced when worn is a good thing. Never heard of a M14 with a worn piston.
No M1/M14 expert, just my personal experience. Love to hear other anecdotes.
* ITR= USMC Infantry Training Regiment at Camp Pendleton
-
I've been using Dexron ATF on my ARs and the thing won't burn off.
Been thinking about using that on my AK's... Give'm that nice sheen ;) :shaka:
-
Anyone ever use tetra grease in the white tube? Been reading that its good for AK's and semi auto handguns.
I got ballistol from KGS which is what Daniel recommended for AK's.
What's good for polymer handguns? Or stainless handguns?
Where is everyone buying their oils and greases? Online or LGS? If LGS which one?
-
I used to use Corrosion X as a LP, but I've switched to SLIP 2000 EWL and EWG. With the M&Ps, it doesn't seem to make too much of a difference as a lube. There is a noticeable difference with my 1911 though. The slide on the 1911 seems to be a lot smoother since I switched to the EWL. The difference with the EWG isn't as noticeable feel-wise, but I do see more of it still there when I clean the pistols.
It doesn't seem any cleaner when I'm done shooting, but I do only shoot lead through the pistols so that may be a big factor.
-
For trigger groups on my AR I use moly grease. For the rest of the gun I use CLP. I use the moly grease on other guns that have a separate type of trigger group such as the 10/22. For lube on my Marlin and 10/22 I have used graphite and other dry lubes for the bolt/receiver. The reason is the bolt/receiver collects so much carbon and dirt from crappy .22 ammo that the dry lube allows one to not have to clean the area as often. But now I just CLP and clean them more often.
-
i've been using corrosion x on rifles and shooters choice grease on handguns. Just picked up a tub of frog lube though. Gonna probably switch to that for everything.
-
I've been using Ballistol. I get it online in non-aerosol cans, though I think there is someone who sells it on Oahu.
I chose it because it's a good compromise of a lot of different things, useful for a variety of tasks and, key for me and the folks I do gun work for, it is completely non-toxic. That it competes well with the most modern CLP's is good and I can sacrifice what it doesn't do as well as more toxic oils for the non-toxicity. I have this stuff on my hands a lot.
That said, I don't shoot much copper and don't have to deal with significant copper fouling. Word on the interwebs is mixed on if it works well for that, some swear it does and others swear it doesn't. I swear I don't know.
What I do know is that elite stripping a firearm, cleaning each piece and giving everything a very light coating of ballistol slicks up an action like nothing I've ever seen. Also helps prevent rust in places where that you don't get to in a regular field strip and clean. Other CLPs do the same, I'm sure, Ballistol is just the best that I have used.
-
I use ballistol too. I picked up a big can of it at the last gun show at the blaisdell to try it out, and I like it. Even makes the wood on my m1a and mosin nagant purty. I still use clp on occasion too though.
-
I use Ballistol for some things, but its really hard to get past the smell.
-
.
-
Use CLP or Corrosion X depending on type of surface. Corrosion X also for reels. For grease, white lithium grease.
and TM Ultra Bolt Grease for bolt guns. Will check out ballistol at the next gunshow.
-
Hmm. I'm surprised no one uses froglube. WIth all the hype behind that product i figured more people on teh island would be using it since it's biodegradable and can be shipped here without issues.
-
Hmm. I'm surprised no one uses froglube. WIth all the hype behind that product i figured more people on teh island would be using it since it's biodegradable and can be shipped here without issues.
I use froglube.
-
Ballistol
Corrosion Block
Hoppes Gun Oil
FP10
RIG grease
-
ATF oil and Kroil
-
I use froglube.
Do you like it more than stuff you've used in the past? I read a lot about it on m4carbine however they always push site sponsors so hard i can't tell if they're just trying to hype it up or if it's really the next level lube that they make it out to be.
-
Do you like it more than stuff you've used in the past? I read a lot about it on m4carbine however they always push site sponsors so hard i can't tell if they're just trying to hype it up or if it's really the next level lube that they make it out to be.
I ran it during my Costa Ludus class, and it seemed to work really well. I think for the internals it is really good. I do think that I might throw some grease though on some of the trigger springs on the AR-15 and stuff like that instead of using this stuff for that as well.
A couple of things I like about it:
1.) The smell. You can't beat it. It smells like wintergreen which is great. It doesn't bother my wife, it doesn't bother me, and it hasn't bothered any students.
2.) non-toxic. This stuff does not hurt my hands or anything else for that matter. I used some of it as lip balm in california when I didn't have anything else (it worked). When I am done cleaning, I don't feel like if I do not wash hands asap that my hands will fall off after using this stuff.
3.) works as a good cleaner. Cleaning is simple, scrub, wipe with microfiber, and re apply some.
4.) I didn't like the paste, it was basically frozen while I was in California so that was a pain in the ass lol. Here in Hawaii we probably won't have that problem of 30 degree weather any time soon so this may be a moot point.
5.) My guns ran with it, no issues. The issues I did have were not lubrication related.
Negatives:
Price; I also don't think it is the best for long term rust storage type prevention. I think I rather get something I can spray on in that instance to get a little bit better coating without having to wipe everything.
-
I use froglube on my ar. Stuff is great and smells like mint...or salonpas :thumbsup:
-
I've been using Ballistol. I get it online in non-aerosol cans, though I think there is someone who sells it on Oahu.
I chose it because it's a good compromise of a lot of different things, useful for a variety of tasks and, key for me and the folks I do gun work for, it is completely non-toxic. That it competes well with the most modern CLP's is good and I can sacrifice what it doesn't do as well as more toxic oils for the non-toxicity. I have this stuff on my hands a lot.
That said, I don't shoot much copper and don't have to deal with significant copper fouling. Word on the interwebs is mixed on if it works well for that, some swear it does and others swear it doesn't. I swear I don't know.
What I do know is that elite stripping a firearm, cleaning each piece and giving everything a very light coating of ballistol slicks up an action like nothing I've ever seen. Also helps prevent rust in places where that you don't get to in a regular field strip and clean. Other CLPs do the same, I'm sure, Ballistol is just the best that I have used.
where online do you get it? PM me if you prefer
-
where online do you get it? PM me if you prefer
http://www.sop-cart.com/ballistol-lubricants/ (http://www.sop-cart.com/ballistol-lubricants/)
Same guy also has an ebay store which sometimes has better prices. Here is a current listing you can find him at: http://www.ebay.com/itm/Ballistol-all-purpose-Lubricant-Aerosol-6-oz-Hundreds-of-Uses-/271142857043?pt=LH_DefaultDomain_0&hash=item3f215fa953 (http://www.ebay.com/itm/Ballistol-all-purpose-Lubricant-Aerosol-6-oz-Hundreds-of-Uses-/271142857043?pt=LH_DefaultDomain_0&hash=item3f215fa953)
Nice guy. When I inquired if he'd ship flat rate to Hawaii so I could try a bottle before buying a larger amount he offered to send me two bottles that were dented with no shipping charge. Unsellable for him, still plenty useful to me. He's also the one who mentioned to me that there was a Ballistol dealer on Oahu.
That said, poking around on ebay is never a bad idea. Just have to double check that the seller will ship USPS. The non-aerosol can is perfectly legal to ship that way but some sellers don't know that. :-/
Edit: Just looked up the listed HI dealer for Ballistol. No idea if it is still valid but it was listed on the Ballistol site.
http://www.ballistol.com/outsideusa.htm (http://www.ballistol.com/outsideusa.htm)
Joseph K & Company
jsotomura@josephk.com
808-593-2883
-
I got ballistol from Daniel at Kaneohe Gun Store...... He had about 20 cans on the shelf about 2 months ago. Give him a call. He swears by ballistol for all AK's..
Honolulu firearm might have but can't remember.
If not give WGS a call or SEC who knows they may stock it now..
-
FrogLube is great stuff and I have some on hand.
Let me know if anyone is interested, PM me or call.
-
I wish froglube had those sample packs in small sizes and then larger sizes of the actual product just in case I like it. Right now I'm still going thru my Militec-1.
-
I had been using Slip2000 EWL, but have recently switched to FIREClean. It's good stuff. Nothing wrong with Slip, but FIREClean makes cleaning up carbon very easy.
I have some Militec as well, but never got started using it.
-
FrogLube is great stuff and I have some on hand.
Let me know if anyone is interested, PM me or call.
Do you have the solvent as well? How much for a bottle of froglube clp?
-
A R
White grease on the buffer spring.
Light grease on the sear
Light grease on the bolt.
If you have poly trigger group not advised to use oil at all on the bcg. Only on the gas rings
All others
HK 94 91 SP89 P7 need to be careful if not get oil near the chamber area. I use light grease
All my other guns I use light grease. Or silicone grease on poly guns
Light oil on firing pins.
I use to use the leftover oil from empty oil containers. Mobil 1 syn on all metal guns
-
I use to use the leftover oil from empty oil containers. Mobil 1 syn on all metal guns
I hear a lot of people which love to use Mobil 1 syn on their guns. They like to laugh at the rest of us willing to spend a lot more on these custom gun lubes. Then again their guns seem to run just as well as most other's people guns...
-
Do you have the solvent as well? How much for a bottle of froglube clp?
Yes, I have the solvent. Apologize for the late reply..
-
Yes, I have the solvent. Apologize for the late reply..
So how exactly does frog lube work?
My AR didn't get hot enough for the coating to get liquify, but the carbon did wipe off easily....
Isn't it suppose to liquify when shots are fired?
Does it protect the metal from corrosion?
It was just weird shooting the AR bone dry like that.....
-
So how exactly does frog lube work?
x2
-
Ummm Mr froglubehawaii can you help us out and explain how this really works.
-
Sorry about the late responses.
But to answer all the questions, yes you have to first strip your weapon of all other lubricants that you have used before. So I would use the solvent, it will strip all the old stuff off. So I basically spray solvent and let set for about 20 minutes and wipe off.
The next step would be to heat the metal with a hair dryer (not so hot that it can't be handled) and spread the paste with a brush. Very generously and let that set for about 20-30 mins too. Then wipe off.
You repeat this process another time and then you're good to go. But it does get better over time when applied. More the better.
I use the liquid at the range, before I fire my weapon. I drop a little on the moving parts.
That's why like the 4 oz kit. It comes with paste, liquid, micro fiber towel, and nylon cleaning brush.
And yes it helps against corrosion.
I'm going to be at Koko Head tomorrow, my daughter is attending the LIFE safety class. So if anyone is interested, I'll bring out some samples.
-
Thanks for the info FLH
-
Thanks for the info FLH
+1
-
ATF oil and Kroil
Is there anybody who sells Kroil locally, I am on Oahu?
-
I figure I'd post my little rant about my experiences and thoughts of the lubes I've used.
CLP is popular because its cheap, both a cleaner and a lube, and because its what the military uses. I tend to go thru a lot of CLP because I just happen to always have some on hand, and it does what as a "good enough" cleaner, and a "good enough" lube. In my experience though, CLP is kind of just "good" at both, but not spectacular at either, which is the trade off you get. I feel like CLP is more of a duty/usage lube. Really meant for guys that shoot/clean/relube their weapons regularly, like our servicemen. And I always apply a bit before shooting, since it tends to dry and leave a light "dry film", rather than staying wet.
Ballistol is another cleaner/lube/protector product that's gaining more traction, even though its been around for forever. I find its a better cleaner than CLP, and is a decent enough lube, though I find it just a tad thin for my taste. It doesn't dry out as fast as CLP does, though I've heard it gets cooked off faster than some other lubes. One of the biggest advantages of ballistol is that it can be used on wood and leather, and actually vastly improved the stocks on my rifles. Of course the downside is that the stuff stinks.
Mobile-1/synthetic motor oil- I heard about it, and I had to give it a whirl. I gotta say, for a dedicated lube, it does work pretty damn well. It doesn't dry out or cook off like CLP. And of course, its absolutely dirt cheap when compared to other lubes. The downsides are that as an external protectant, I'm gonna stick to CLP. Motor oil will stay wet for a long time, and that's where the drying out has its advantage. Also, it tends to get into all the little nooks and crannies you may not like to clean, so if youre the kind of person that likes to strip all the oil off when you clean, it does make it a little harder.
Militec-1 is a pretty damn good lube, especially for AR-15 lovers. Its one of those lubes, like slip200 and froglube that actually penetrate the pores of the metal. The recommended application involves heating the metal before applying. These lubes seemed to be marketed towards the crowd that wants a very high quality, thin coat of lube. I know that some people still prefer the thinnest coat possible of lubrication to avoid attracting particles/debris. Personally, I am not in that train of thought, I am quite liberal with my lube needs, and feel that I'd rather have a wet/dirty gun, than trying to keep it dry/clean, since any gun is going to get dirty anyways. While I like the science behind it, I'm personally a bit too lazy to do the whole heating up of the metal thing, when conventional lubes have worked just fine for me in the past. Considering the volume I shoot, and our shooting regulations at kokohead concerning rapid firing, I really don't see me needing to invest my time in any of these.
I'm also a big fan of using grease when/where it is appropriate. I like to apply grease to the slide rails of my pistols, the high wear spots of my ar-15 bolt, and of course on the op rod of my M1a. I find grease stays where you put it, and it works very well. For grease, I just use cheap automotive store white lithium grease, and I use it incredibly sparingly.
Right now, I recently began using FIREClean. And I gotta say, so far I am very, very impressed. Its marketed as a metal conditioner as well as carbon repellent, on top of being a cleaner/lube. Its non-toxic and odorless. It cleans better than CLP, it works its way into the metal conditioning it like militec-1 without having to heat it up, and it lubes incredibly well. This stuff is SLICK. The big selling point of this stuff is that, because its a carbon repellent, once it gets soaked into the metal, it makes clean up a breeze, as nothing gets too caked on. I haven't put it thru the full ringer yet, since I don't have the money/ammo to shoot in high volume, but so far cleaning my guns afterwards goes by much faster. The downside to this stuff is that its pricey. I was given a bottle by my cousin to try out, but a 2oz bottle runs about $15
That's just my little rant of what has worked for me.
-
KY Fire and Ice and Spit...... ;D
Serious answer, Blue Wonder and Fireclean.