2aHawaii

Tools and Uses => Firearms and Accessories => Topic started by: SpeedTek on March 04, 2013, 12:20:09 PM

Title: Range Day Testing
Post by: SpeedTek on March 04, 2013, 12:20:09 PM
Went to KHSC with another member yesterday.

Testing out 762x39 AR15 upper for developmental use by another company for future products.

Here are the parts I used.
RST Upper Receiver, BCG, Quad Rail & Muzzle Brake
Standard Arms 16" 1/10 Twist 762x39 Barrel 4140 Steel, Micropolished bore.
AIM Sports 3-9x50 Scope

Lowers
Upper Left Lower Recvr - NFA Polymer Lower with Ergo Grip, LMT Buttstock & Rock River 2-Stage Trigger 2/2.5lbs #1
Right Side Lower Recvr - NFA Polymer Lower with MilSpec STD Trigger 5lbs #2
Lower Side Lower Recvr - NFA Polymer Lower with Standard Poly Trigger Group 4.5lbs #3

First 30 Shots Sighted in Scope with Lapua Brass Ammo 123gr FMJ with Lower #2
Next 10 Shots Silver Bear 123gr FMJ

Target Shown: 100 Yards
Switched to Lower #1
In the Center was 4 Shots Left Side is Silver Bear 123gr One Flyer
In the Center was 4 Shots Lower Right Side is Lapua Brass!
Upper Right target was 5 shots rapid fire

After that we shot another 60 rounds at all the metal at 220 yards using various ammo
Tula, Wolf, Silver Bear & Lapua all with good results and not one misfire.
Not one miss with Lapua or Silver Bear!

Felt recoil is still a little high compared to my other comp.  Side blast was low and quiet.
Need to work on this.

The other 2a'er that came had too much fun.......

Shell Casing L to R
Lapua Brass, Tula, Silver Bear, Last Case to right is a Silver Bear shot by an Arsenal AK
You can see the difference in the Firing Pin Strike.



Title: Re: Range Day Testing
Post by: Heavies on March 04, 2013, 05:57:33 PM
Nice!  What kind of load in the lapua?
Title: Re: Range Day Testing
Post by: dirsh on March 05, 2013, 10:44:39 AM
(http://i7.photobucket.com/albums/y254/dirsh/gun/IMG_0836Small_zpse0a27b82.jpg)

@ 50  8)