2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: bknaka on April 20, 2013, 10:45:43 PM
-
Like the title says. Im thinking about buying a M&P 15 Sport. Any thoughts about this weapon. What im gonna be using it for is just taking to the range for target shooting.
-
What are your concerns and how much are you getting it for?
-
No forward assist and ejection port door. Makes resale later a little harder unless new buyer dont care. If its cheap then no problem.
-
Not to offend but why?
The amount you would neee to spend to make it to milspec is gonna cost.
I'd say for a few hundy more go see dex and they can build one for you with a gun that built to what u want. Not built on a line for the mases. When you build from scratch you can choose the rail system u want, bcg, optics ect from the start.
Go talk to dex
-
Right now custom builds are under $1000.
Of couse depending what you put in/on it.
-
Like the title says. Im thinking about buying a M&P 15 Sport. Any thoughts about this weapon. What im gonna be using it for is just taking to the range for target shooting.
There is alot of dislike for the S&W M&P sport. I had a M&P15T model, which is essentially the same components but the sport model doesn't have a forward assist, dust cover, and quad rail. If you are thinking about getting a different rail from the start I would also suggest talking to X-Ring and get you something where you get to pick all the parts.
My brother is now the owner of the M&P15, but here is my review of what my personal impressions were.
-There was some slop between the upper and lower. Did this affect function? No and there's supposedly a wedge you can put in if it bothers you.
-Fit and finish were up to par with my taste at the time, but stock components were eventually changed out. (Stock, grip, and a heavier buffer. It felt better and ejected better IMO)
-Round count is over 1500 between me and my brother. Only issues were mag related and a few failure to fire's (around 7) which I think was the ammo. It went bang when reloaded.
-Accuracy was good enough for the purpose that it was purchased for. Hitting plates at kokohead.
-It's got that melonite finish which is debated on both sides of good and bad.
-The resell value is meh... I personally don't let that sway my decisions.
Hope this helps. Good luck with your decision :shaka:
@Bigkahuna808 - How do you make something that is not milspec, well milspec? I'm really asking, because I thought the whole milspec thing was the certain metals that are used, measurements, etc.
-
Replace all components over time...spend bukko big dollars in the long run.
-
If you can get it at the $700-$800 range, its one of the better value ar's in the market. If want to change out major components then your better off getting more middle of the road or higher end models. Its plenty accurate and reliable for the recreational shooter and then some. Don't let the lack of a forward assist and and dust cover be complete deal breakers. If your not gonna be rolling around in the sand you woun't really need the dust cover. As far as the forward assist, I've only used it less than 5 times, all of which were in field problems while using dirty blank rounds and even then some CLP cleared that up.
-
Not to offend but why?
The amount you would neee to spend to make it to milspec is gonna cost.
I'd say for a few hundy more go see dex and they can build one for you with a gun that built to what u want. Not built on a line for the mases. When you build from scratch you can choose the rail system u want, bcg, optics ect from the start.
Go talk to dex
Only the upper receiver is not military specifications because it doesnt have the dust cover and forward assist. Also nothing semi is milspec since its not full auto!
They ok as starter ARs. But there is a major issue with the barrel and upper receiver i have found. Not on all. But over 10 i found have had this problem. But easy fix. If you shoot a few shots and then you get some flyers. You have this problem.
-
I believe its a non-chromed lined barrel as well.
-
I have one and think its great. Much tighter groups then my chrome lined colt 6920. The barrel is,nitrated which many believe makes the barrel more accurate than chrome which is a plating.
Have fun
-
IMO.....good enough!
-
I want one also but the one that has the forward assist and ejection port cover. I think it's the M&P15X maybe. I got an M&P 9mm and its a great weapon. I like the Smith and Wesson line of M&P and plan to expand my collection with more of them.
-
I want one also but the one that has the forward assist and ejection port cover. I think it's the M&P15X maybe. I got an M&P 9mm and its a great weapon. I like the Smith and Wesson line of M&P and plan to expand my collection with more of them.
The M&P 15T is what you want!
-
The M&P 15T is what you want!
Check with OGC ...
CARTER BERLIN @OGCTACTICAL 27 Apr
JUST GOT 2 OF THE S&W M&P 15T 5.56 RIFLES FREE FLOAT WITH FLIP UPS, $1499
11:24 AM - 27 Apr 13
-
Only the upper receiver is not military specifications because it doesnt have the dust cover and forward assist. Also nothing semi is milspec since its not full auto!
They ok as starter ARs. But there is a major issue with the barrel and upper receiver i have found. Not on all. But over 10 i found have had this problem. But easy fix. If you shoot a few shots and then you get some flyers. You have this problem.
i have a mp15, what is the problem on this? i'd like to know in case something comes up.
-
Not to offend but why?
The amount you would neee to spend to make it to milspec is gonna cost.
I'd say for a few hundy more go see dex and they can build one for you with a gun that built to what u want. Not built on a line for the mases. When you build from scratch you can choose the rail system u want, bcg, optics ect from the start.
Go talk to dex
Who is Dex???
-
Dex is Speedtek from XRing.
-
Dex is Speedtek from XRing.
Oh...thanks! I didn't know the X-ring will custom build one for me! I think I am making a trip there tomorrow afternoon!
@Speedtek, what time is a good time to come and see you? Can I google directions to you?
-
yeah, just google the shop
and be careful when driving there
the pupus are not always a friendly place to be...
http://2ahawaii.com/Smileys/extended/cool.gif (http://2ahawaii.com/Smileys/extended/cool.gif)
Oh...thanks! I didn't know the X-ring will custom build one for me! I think I am making a trip there tomorrow afternoon!
@Speedtek, what time is a good time to come and see you? Can I google directions to you?
-
yeah, just google the shop
and be careful when driving there
the pupus are not always a friendly place to be...
http://2ahawaii.com/Smileys/extended/cool.gif (http://2ahawaii.com/Smileys/extended/cool.gif)
thats funny mac the pupus hahahaha. But i agree you dont wanna be stuck in the pupu when the store :rofl: :rofl: :rofl: closes or didnt have ammo on the way out.... but i did grow up there in waipahu not the pupus but still relative to area.
-
has anybody noticed he just asked the question, then bailed on the thread?
lol
-
has anybody noticed he just asked the question, then bailed on the thread?
lol
Well I guess he got his answer...
-
Oh...thanks! I didn't know the X-ring will custom build one for me! I think I am making a trip there tomorrow afternoon!
@Speedtek, what time is a good time to come and see you? Can I google directions to you?
I usually there at 1pm.
Leokane St (Cutter Mazda/Happy Dragon Restaurant/Firestone)
Go down 2 blocks (towards the ocean)
Turn Left on Pupuole St. (HECO Transformer Station on opposite corner)
Go down till you go over the speedbump and hook a LEFT on Pupuole Place (Narrow St.)
Drive up to the beautiful fenced area and park on your left.
You can call me at 6367118 to see where I am.