2aHawaii
Tools and Uses => Reloading => Topic started by: bushidoaa808 on May 18, 2013, 12:18:40 PM
-
Hey 2A Hawaii gang!
Trying to do some research here and was wondering what your favorite powder is. I know we all have our favorites, and it depends on what caliber and type of load you're doing, but I'm curious to see what the top 10 most popular powders are for both rifle and pistol. If you want to give more than 1 favorite, please feel free to do so.
No need to put your load data, just the caliber loaded (if you'd like), and the type of powder. I'll start it off.
Pistol: 9mm Luger & 45 ACP = Vihtavouri N340 or Winchester 231
Rifle: 223 Rem, 308 Win, 270 Win = Hodgdon Varget or H322 (mainly for 223)
Thanks,
;D :shaka:
-
For 9mm I like Titegroup.
For .223 I like H335 for lighter bullets and Varget for heavier bullets.
-
Reloder 15
.223 - 24.0 topped with a 77 SmK or Nosler, 24.2 topped with an 80
.308. - 43.0 topped with a 175 SMK.
To add, the loads with the 77s and 80s are very accurate. Scored pretty well considering I made mistakes of my own. All the charges were thrown on my Dillon 550B and a crimp was added since I had the extra station anyways, I think it improved my confidence.
-
For 9mm - Vihtavouri N320 or W231
For 357 - W296
For 38SPL - W231
For .223 - Varget & TAC
For 308 - TAC & IMR4895
-
blc-2
-
W231
IMR4895
-
9mm/45acp- WW231 or HP38 same thing
223- Reloder-7 -light bullets only
-
9mm, .40S&W, .45ACP - Viht N320.
.38 Super - Viht 3N38
-
:shaka:
-
.45-.38spl - Bullseye, because that is what I have a lot of.
.308 - .30-06 - Varget, AA2520, IMR8208XBR depending on application.
6mmBR - IMR8208XBR
-
These are the powders I use
(http://i287.photobucket.com/albums/ll153/taiyota/52255D96-05ED-4D88-971C-2DEEC291FF0F-92821-00001BE529347B4C_zpseacb6298.jpg)
-
6mmbr - varget
223 - H335 and vihtavouri n135
I would like to ask everyone to stop using varget so I can get some for me.
-
.223: 23.0 grains of Varget under a Sierra 77gr MatchKing
-
.223: Reloder 15 and Varget for 69 gn HPBT; Reloder 7 for 52 gn HPBT; H335 and CFE for 55 gn. The last rounds fired by each rifle are CFE loads before I case 'em up.
Only did that a few times, but seems to work: less copper fouling saves patches and time.