2aHawaii

General Topics => General Discussion => Topic started by: passivekinetic on July 11, 2013, 11:19:16 AM

Title: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 11, 2013, 11:19:16 AM
Folks, I am wondering about a 9mm revolver. (Yes, there goes the budget.... but still, we are only in the "thinking" stage right now, as you guys can appreciate haha).

Since the cartridge is not rimmed, the full moon clip must be used right? Or did I get that wrong?

Any particular models recommended, if anyone of you have experience with this?

Or maybe you reckon this is silly and I should just get another Glock? (LOL; only half kidding, I might decide on another Glock instead - please, no SIG flames here, I like SIG also).
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Hi state on July 11, 2013, 12:04:04 PM
Yes you'll need a moon clip if using a rimless cartridge.Why are u looking for a revolver in 9mm? U might find a problem finding one since I don't think there are to many manufactors still producing them, and If u do finding parts might be your next issue. You might be better off getting something else if wanting to shoot this caliber like a sig ;)
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 11, 2013, 01:32:33 PM
Hahaha
Title: Re: 9mm revolver? Full moon clips or what?
Post by: GZire on July 11, 2013, 03:14:32 PM
Folks, I am wondering about a 9mm revolver. (Yes, there goes the budget.... but still, we are only in the "thinking" stage right now, as you guys can appreciate haha).

Since the cartridge is not rimmed, the full moon clip must be used right? Or did I get that wrong?

Any particular models recommended, if anyone of you have experience with this?

Or maybe you reckon this is silly and I should just get another Glock? (LOL; only half kidding, I might decide on another Glock instead - please, no SIG flames here, I like SIG also).

I have never seen a 9mm revolver, but that doesn't mean someone doesn't make one.............anyhow yup, full moon clips or half moon clips for a rimless cartridge.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Teichi on July 11, 2013, 04:42:20 PM
Smith and Wesson, Ruger, Taurus and Korth made 9mm revolvers. Korth was the only one I know that didn't use full moon clips, but could also shoot 38 special and 357 mag.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Bigkahuna808 on July 11, 2013, 04:55:29 PM
Ruger makes a sa revolver, in swappable cylinders 38/357 and 9mm.  Was looking over it at SEC
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Nomenclature on July 11, 2013, 04:57:37 PM
Folks, I am wondering about a 9mm revolver. (Yes, there goes the budget.... but still, we are only in the "thinking" stage right now, as you guys can appreciate haha).

Since the cartridge is not rimmed, the full moon clip must be used right? Or did I get that wrong?

Any particular models recommended, if anyone of you have experience with this?

Or maybe you reckon this is silly and I should just get another Glock? (LOL; only half kidding, I might decide on another Glock instead - please, no SIG flames here, I like SIG also).
Ruger still makes the Blackhawk convertible. You can get models with cylinders for .357 Magnum and 9mm or .45 Colt and .45 ACP.

http://www.ruger.com/products/newModelBlackhawkConvertible/models.html (http://www.ruger.com/products/newModelBlackhawkConvertible/models.html)
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 11, 2013, 05:05:03 PM
interesting options!
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Tom_G on July 12, 2013, 07:17:36 AM
Saw this in the July 15 Shotgun News

http://www.charterfirearms.com/products/Charter_Pitbull_79920.asp (http://www.charterfirearms.com/products/Charter_Pitbull_79920.asp)

No clips required!
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 12, 2013, 08:33:15 AM
Tom thanks, that is perfect. This model might be a hot sell!

Let me do some more research.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: oldfart on July 12, 2013, 09:54:48 AM
I still do not understand the logic of a 9mm revolver. Why?
Somebody enlighten me.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: TeamMidori on July 12, 2013, 10:21:16 AM
Cuz it's a 9.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: gsmgc on July 12, 2013, 10:33:17 AM
I believe Charter Arms makes one.

Not sure the model name/number though.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Kingkeoni on July 12, 2013, 10:38:39 AM
I believe Charter Arms makes one.

Not sure the model name/number though.

Tom just posted a link to it
Title: Re: 9mm revolver? Full moon clips or what?
Post by: GZire on July 12, 2013, 11:07:20 AM
I still do not understand the logic of a 9mm revolver. Why?
Somebody enlighten me.


'Cause can.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Heavies on July 13, 2013, 09:00:28 AM
Ruger makes a sa revolver, in swappable cylinders 38/357 and 9mm.  Was looking over it at SEC
I was looking that one over as well. Its very cool. It does not need moonclips. The cylinder is bored so that the case headspaces off the mouth of the cartridge.

I was considering getting it to shoot 9mm on the cheap, but with ammo being so short these days it kinda killed it.  I ended up finding a cherry three screw blackhawk.  Very nice and unconverted.  :)
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 13, 2013, 09:38:08 AM
Hey I could not find a Ruger revolver in 9mm.

http://www.ruger.com/search/ (http://www.ruger.com/search/)

Not SA or DA.

Is this convertible no longer in production?
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Bigkahuna808 on July 13, 2013, 10:14:43 AM
They come pre chambered for 357/38 and 45 long colt with alternate cylinders think they are still current models. 
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Tom_G on July 13, 2013, 10:39:59 AM
Hey I could not find a Ruger revolver in 9mm.

http://www.ruger.com/search/ (http://www.ruger.com/search/)

Not SA or DA.

Is this convertible no longer in production?

http://www.ruger.com/products/newModelBlackhawkConvertible/features.html (http://www.ruger.com/products/newModelBlackhawkConvertible/features.html)
Title: Re: 9mm revolver? Full moon clips or what?
Post by: daimond on July 13, 2013, 11:06:33 AM
I recently found a ruger speed six in 9mm from a private owner in prescott,az. I got for $650, $750 after shipping & FFL fees.check out gunbroker. The s&w 547 and ruger speed six are going for over $1000. It's getting crazy. Mine is SS w/ a 2.75" barrel. I got full moon clips for it. Full moon clips are faster to reload than speed loaders and mags. I never shot it yet.when do you go to the range, i might be there w/ it and you can check it out.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 13, 2013, 12:34:21 PM
http://www.ruger.com/products/newModelBlackhawkConvertible/features.html (http://www.ruger.com/products/newModelBlackhawkConvertible/features.html)

Thanks! Wow don't know why the search didn't give the results.

Anyway it looks great! 357 probably shoots 38 Special also, and then you get the 9mm with no clips! (And yes, finally, we can use CLIPS correctly :-D

Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 13, 2013, 12:36:31 PM
I recently found a ruger speed six in 9mm from a private owner in prescott,az. I got for $650, $750 after shipping & FFL fees.check out gunbroker. The s&w 547 and ruger speed six are going for over $1000. It's getting crazy. Mine is SS w/ a 2.75" barrel. I got full moon clips for it. Full moon clips are faster to reload than speed loaders and mags. I never shot it yet.when do you go to the range, i might be there w/ it and you can check it out.

Side question: How do you guys go about buying on the mainland? From what I understood, few if any brokers/dealers on the mainland want to bother with all the paperwork shipping to HI, and then the LGS here to do not want to do the FFL transfers because they feel it is a pain in the ass and not worth it since they don't sell to you at their prices? This is what I understood from reading posts, but never actually asked any LGS about transfers.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: moosed on July 13, 2013, 12:52:45 PM
Side question: How do you guys go about buying on the mainland? From what I understood, few if any brokers/dealers on the mainland want to bother with all the paperwork shipping to HI, and then the LGS here to do not want to do the FFL transfers because they feel it is a pain in the ass and not worth it since they don't sell to you at their prices? This is what I understood from reading posts, but never actually asked any LGS about transfers.

Maybe you should post a link to the threads you read stating that ^^ ...

That's not the impression I have.  Sellers, whether local or mainland, are in business to make a profit.  They pass on any additional shipping & handling costs to Hawaii residents.  FFLs in Hawaii are more than eager to perform this service for local customers.

I've purchased 3 long guns on Gunbroker.com (2 sellers), and one on BudsGunShop.com.  There has never been any attitude on either side of the transaction from the FFL holders other than one of exceptional service and professionalism.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 13, 2013, 01:03:38 PM
OK thanks; I don't have the posts on hand, they have just been posts I've read over the years here and there.

Anyway I am very happy to hear that it is totally not the case. So I will proceed accordingly and talk to the LGS about my options when I see something on the mainland.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: GZire on July 15, 2013, 03:25:01 PM
Maybe you should post a link to the threads you read stating that ^^ ...

That's not the impression I have.  Sellers, whether local or mainland, are in business to make a profit.  They pass on any additional shipping & handling costs to Hawaii residents.  FFLs in Hawaii are more than eager to perform this service for local customers.

I've purchased 3 long guns on Gunbroker.com (2 sellers), and one on BudsGunShop.com.  There has never been any attitude on either side of the transaction from the FFL holders other than one of exceptional service and professionalism.


I can name one local FFL (no I'm not going to say who) who does not like to do FFL transfers and can/has jacked up the price of transfers which is why I no longer use him.  Unfortunately that person never figured out that they can make some serious $$$ by doing just FFL transfers.  Sad the same business as usually business model in Hawaii.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Kingkeoni on July 15, 2013, 04:05:39 PM
OK thanks; I don't have the posts on hand, they have just been posts I've read over the years here and there.

Anyway I am very happy to hear that it is totally not the case. So I will proceed accordingly and talk to the LGS about my options when I see something on the mainland.

Last I checked:

SEC will not do FFL transfers.

Young Guns will not do FFL transfers

Kaneohe Gun Shop will not so FFL transfers

Magnum/HF will not do FFL transfers.



Ready on the right will.

OGC will.

X-Ring will

Gunsource will

Windward Gun Shop will

Not sure about the others.


Side question: How do you guys go about buying on the mainland? From what I understood, few if any brokers/dealers on the mainland want to bother with all the paperwork shipping to HI

I have encountered this.
A lot of gun shops do not know the gun laws in Hawaii and are afraid to send something here.
I have had to send them a link to the HRS and have had some talk to the receiving FFL to clarify.

It's not so much a paperwork thing but more of an ignorance thing. (Respectfully)
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 15, 2013, 04:39:13 PM
Thanks for the insightful post.

So what is the recommended procedure? I have found some LGS that are not able or not willing to get me the model I want.

Do I buy it/them on gunbroker first, and then find an FFL locally to do it? Or do I need to advise whichever FFL locally first, then I go buy?

Is it just like eBay? Do they use PayPal or another form of payment?

Thanks. I have never bought auction before.


Last I checked:

SEC will not do FFL transfers.

Young Guns will not do FFL transfers

Kaneohe Gun Shop will not so FFL transfers

Magnum/HF will not do FFL transfers.



Ready on the right will.

OGC will.

X-Ring will

Gunsource will

Windward Gun Shop will

Not sure about the others.


I have encountered this.
A lot of gun shops do not know the gun laws in Hawaii and are afraid to send something here.
I have had to send them a link to the HRS and have had some talk to the receiving FFL to clarify.

It's not so much a paperwork thing but more of an ignorance thing. (Respectfully)
Title: Re: 9mm revolver? Full moon clips or what?
Post by: Kingkeoni on July 15, 2013, 11:22:05 PM
Thanks for the insightful post.

So what is the recommended procedure? I have found some LGS that are not able or not willing to get me the model I want.

Do I buy it/them on gunbroker first, and then find an FFL locally to do it? Or do I need to advise whichever FFL locally first, then I go buy?

Is it just like eBay? Do they use PayPal or another form of payment?

Thanks. I have never bought auction before.

Procedure:
Buy the firearm.

Send payment.

Find out preferred method of them receiving copy of the FFL. (Most will accept fax or email, some want it mailed)

Contact FFL of choice, let them know what you bought and the fax number, email address or postal address to send a signed copy of their FFL.

The Store/person will send the firearm to the FFL.

The FFL then registers the firearm into their inventory.

You go to pick up the firearm exactly the same as I you had bought it from the store. (Long guns still require a PTA, pistols require a 2 week wait)

You pay the transfer fee, then you go home and start showing off your new toy.
Title: Re: 9mm revolver? Full moon clips or what?
Post by: passivekinetic on July 16, 2013, 08:50:26 AM
Haha ok thanks for explaining that to me. I like the final step!  :D