2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: sound wave on July 14, 2013, 05:03:51 PM
-
I have a M&P 15-22. I modified the upper and did an M4-style conversion. I wanted to have a stock upper as well so I could switch between the two. I bought an upper receiver and barrel from S&W. They would not sell me the barrel extender or the ejector. They referred me to Mel Chung on Molokai. I called him and he basically told me that he cannot help me.
Does anyone know of a local shop/gunsmith that can get the barrel extender and ejector? Also possibly install it for me? Thanks for any help.
-
I know dex at xring worked on some 15/22 try him
-
Thanks. I sent him a PM last night. Waiting for his reply.
-
If they won't sell the parts we may have to make them.
-
Thanks for responding. So either you could try to get the parts from S&W or you would need to make them yourself, but either way it could be done?
Ballpark how much would it cost if you needed to make it yourself? I wouldn't mind having to wait because the barrel is kind of useless to me as-is.
I think I would be able to make it to your shop on Wednesday before you guys close and drop off the barrel.
Thanks again.
-
Just curious as to why you want a 2nd upper
With the time,money and effort you're gonna be putting into it you might as well buy a whole new one
-
Thanks for responding. So either you could try to get the parts from S&W or you would need to make them yourself, but either way it could be done?
Ballpark how much would it cost if you needed to make it yourself? I wouldn't mind having to wait because the barrel is kind of useless to me as-is.
I think I would be able to make it to your shop on Wednesday before you guys close and drop off the barrel.
Thanks again.
We close at 5. I should be there by 2.
Bring the other upper also.
-
Just curious as to why you want a 2nd upper
With the time,money and effort you're gonna be putting into it you might as well buy a whole new one
it wasn't supposed to be expensive. A new barrel and upper receiver only costed me something like $110 shipped. I have my stock barrel nut and stock handguard. S&W gave me the impression that Mel Chung was going to be able to supply the few parts I was still missing. I am still hopeful that in the end it will be worth it going this route.
I didn't really want to have 2 full 15-22's. I was going to stick a scope and a barrel shroud on this new upper and keep the red dot and magnifier on my converted upper. Then I could just swap out the upper to whichever one the wife and I felt like using. If I got another .22 rifle I think would want a 10/22 before another 15-22.
We close at 5. I should be there by 2.
Bring the other upper also.
Thanks!!! I work half day and have a doctor's appointment at 1:30 in Kalihi, but I don't think it will be a problem getting to your shop in time.