2aHawaii
General Topics => Off Topic => Topic started by: new guy on July 23, 2013, 01:27:53 PM
-
.
-
The have some cool stuff here. Laser cutter and CNC router. Not sure if they can help with making the files and stuff for that. I've been looking into the vacuum former there because I have some molds that I'd like to try in it.
http://oahumakerspace.com/shop/equipment-list/ (http://oahumakerspace.com/shop/equipment-list/)
-
.
-
Buy the electric knfie from target. ..use it and return it after
-
.
-
Great idea, but I'm already on their "No Return" list for doing the same exact thing with beeveedees. >:(
I hope you didn't switch to Walmart!! If so, I'll have to find somewhere else for my briefs!!
-
.
-
:o :o :o :o :o :o
Shoot, man... all I can say is I hope you haven't purchased any size 36-38s in the past few weeks...
And if you have, please consider those kernals of corn my personal gift to you.
-
Nice find, s15; I had no idea this place existed!
Here's the catch:
For full “Maker” Membership, at the annual rate of $2000/year, you save $640 over Monthly Membership and you save $7125 over Daily Membership.
Anything lower than "Maker" and no power tools.
-
Membership levels are broken down by access and duration. You can occupy the space for very little money if you do not use very many resources as a “reader”. You can also pay for any level of membership by the day, month, or year. The longer the membership you buy, the cheaper it gets because it gives us more room to plan for occupancy. For full “Maker” Membership, at the annual rate of $2000/year, you save $640 over Monthly Membership and you save $7125 over Daily Membership.
They have daily maker memberships. Chart with daily prices is further down page. Just can't buy daily online in advance. Daily will work perfect for me since I can do most what of I want at home and then pay for a daily membership when I'm ready to use the vacuum former or welders.
-
Here's the catch:
Anything lower than "Maker" and no power tools.
Just called "makers space" (808)351-8059 and talked to Ross - it's $25.00 per day to use their tools. Also asked about using their laser to cut foam, it's ok as long as it does not produce any toxic smoke. He said you can bring down a sample and he can let you know if it's ok or not.
I used my gerber pocket tool to cut my pelican foam to fit my custom bolt gun and it really looks like ass :( really want to redo it.
-
.
-
I think Google gives/sells a tool called SketchUp. Free and paid versions just like Google Earth.
Not sure how well it works exporting a file for CNC laser though.
Interested to hear your experiment with this!
-
As a note, Ross is a gun guy, so you are supporting a 2A business :) , well at least part of it :P.
-
.
-
Let me look around...I might still have a copy of my AutoCAD software around the house. If not, Autodesk (maker of AutoCAD) will mail you a copy of the software that will give you 30 days before it stops working (at least that is how it used to be when I was actually doing Design Engineering...
-
.
-
Much appreciated, bruddah michalebsdad! :shaka:
If you can't find it, no worries... I'll also look into that Autodesk thing.
But damn.... which company mails trial software in today's day and age?!?
I would have hoped they'd have gotten aboard the "download trial software" train!!
Just checked, you can download free trails...
-
.
-
Maybe a free alternative?
http://www.123dapp.com/create (http://www.123dapp.com/create)
-
I haven't messed with Autodesks 123D, but I promise you I will be downloading it shortly and give it the once over. The problem you will have is you have to convert the CAD drawing to whatever language the CNC machine speaks or input everything by hand. Now that we are talking about just a cut out, even doing it by hand shouldn't pose a big issue. It is a simple drawing. I spent about 10 years or so working with Autodesks Inventor software and I can tell you that the software it easy to use (it was my companies first ever CAD software, also Autodesks first CAD software and Pro-E was just way to expensive). I will play with this 123D software and let you know what I think..
-
So, did you do it yet? How'd it look if you did?
I want to cut the foam from my Pelican 1700 I just got (love Amazon). :geekdanc:
-
.
-
It is pretty decent software...I am going to try to find some time to see if I can come up with a cut out. Give me a bit and hang in there I will get back with you!
-
Wow look at this guy
http://img218.imageshack.us/img218/1324/bugoutkit004ws2.jpg (http://img218.imageshack.us/img218/1324/bugoutkit004ws2.jpg)
-
Wow look at this guy
I'm gonna go on record and say that is sexy. :thumbsup:
-
Definitely sexy...
-
How come he got those other magazines? They are not for the AR.
Or maybe this is double layer.
-
.
-
Hey guys, so without fancy CNC stuff, how can we do cutouts?
Anyone try rigging up a hot wire (literally) using batteries, and cutting it like a jig saw?
Of course, we need to make sure we don't have too much current on the batteries and overheat them.
You can do two layers of foam. One layer just plain.
Then the other layer on top, has the cutouts.
Not perfect but maybe can DIY at home?
-
AR57 upper.
5.7 x 28mm.
Uses PS90 mags.
Wow I didn't even know that existed!
-
.
-
.
-
Others throw the foam in the freezer for a few hours before cutting.
Just be careful when using a hotwire to cut foam... certain types of foam give of the same toxic gases found in gas chambers when heated beyond certain temperatures (supposedly).
Thanks. That be true!
-
I have a POSSIBLE alternative, but it might weigh significantly more than foam.
http://www.instructables.com/id/How-To-Make-Your-Own-Sugru-Substitute/ (http://www.instructables.com/id/How-To-Make-Your-Own-Sugru-Substitute/)
I was thinking maybe this could be used for grips as well.
Take a look.
Conceivably you can pour molds which fit your firearms. In which case, maybe we can cut rectangular cutouts from the foam (easier to get straight), and then fill in the gaps with this stuff (with the firearm mold in place, or maybe wrap the firearm in plastic wrap, etc.).
-
Wow I didn't even know that existed!
Me too!!! Where do I sign up for that?!!! LOL
-
Others throw the foam in the freezer for a few hours before cutting.
Just be careful when using a hotwire to cut foam... certain types of foam give of the same toxic gases found in gas chambers when heated beyond certain temperatures (supposedly).
Hmm... I think I'll wait to see how your foam comes out. ;D
-
http://www.mycasebuilder.com/ (http://www.mycasebuilder.com/)
Not sure how much.
Checking prices now.
-
http://www.mycasebuilder.com/custom-foam-cases-sorted-by-use/custom-foam-gun-and-rifle-cases/custom-foam-handgun-and-pistol-cases.html (http://www.mycasebuilder.com/custom-foam-cases-sorted-by-use/custom-foam-gun-and-rifle-cases/custom-foam-handgun-and-pistol-cases.html)
http://www.mycasebuilder.com/custom-foam-cases-sorted-by-use/custom-foam-gun-and-rifle-cases/custom-foam-rifle-and-shotgun-cases.html (http://www.mycasebuilder.com/custom-foam-cases-sorted-by-use/custom-foam-gun-and-rifle-cases/custom-foam-rifle-and-shotgun-cases.html)
Can buy case + foam or just foam.
Around $50 or $60 foam.
-
http://www.casesbypelican.com/pelican-m4-single.htm (http://www.casesbypelican.com/pelican-m4-single.htm)
-
Play with the
https://customdesign.mycasebuilder.com/
kinda fun!
You can reconfigure how you want your handgun and magazines to be organized.
If you can see the above site, go to the earlier page I posted, click on the Glock 17, and then customize.
Now, you can click on the TOP part where there is the SHAPE LIBRARY and then choose YOUR firearm instead of Glock 17 (e.g., Beretta or SIG, etc.).
-
There is a GREEN DOT when you select the foam shape.
Drag that with your mouse to ROTATE it.
You can flip (mirror) the shape with the buttons on the screen but rotation it took me a bit to figure out.
-
I built a simple hot wire cutter to do mine. Turned out pretty good. If anyone needs the info, I can post a how-to on building the thing after work.
(https://sphotos-a-pao.xx.fbcdn.net/hphotos-prn1/1016525_10201603274468541_765695403_n.jpg)
-
Awesome job!
Yes please do tell.
BTW where did you buy the foam and how much?
Mahalo.
-
Awesome job!
Yes please do tell.
BTW where did you buy the foam and how much?
Mahalo.
I got the foam off Ebay for $60 shipped. That was the cheapest I could find it, and it's legit Pelican foam too.
-
I built a simple hot wire cutter to do mine. Turned out pretty good. If anyone needs the info, I can post a how-to on building the thing after work.
Oh nice!!! Did you notice any toxic fumes while cutting the foam?
-
Oh nice!!! Did you notice any toxic fumes while cutting the foam?
There was a bit of smoke, but not too bad while you're cutting everything out. It's actually much worse when you go back in to shave off a bit here and there when the wire isn't buried in the foam; that makes a fair amount of acrid odor.
-
Use an electric knife, like you would use to cut your thanksgiving turkey.
-
I got the foam off Ebay for $60 shipped. That was the cheapest I could find it, and it's legit Pelican foam too.
So search under Pelican foam? Is the only (main) difference that they sized the foam exactly to match the case models, or is it the type of foam?
-
I spoke to my old buddy who runs a machine shop back in the mainland (he used to do all of my R&D stuff) and he said if you find the right shop, they might be willing to do it for a small fee if you can sell it to them as another avenue to make money. He told he never thought of this as another way to market his business. He is doing some prelim stuff with his guys and he would get back to me. Sorry I wasn't more helpful!