1. 2aHawaii
  2. Tools and Uses
  3. Firearms and Accessories
  4. James Madison Tactical (JMT) 80% polymer lower
Print
Pages: 1 [2]

James Madison Tactical (JMT) 80% polymer lower (Read 19783 times)

suka

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #20 on: January 04, 2014, 09:04:26 AM »
Prior to 1960 under the GCA,  firearms in the US were not required to have a distinctive serial identification mark. HRS134-3 was intended for these firearms. Ones which you did not manufatured.
 however, BATF still to this day do NOT require a serial number on home built firearms. HRS does not address the  manufacture requirements, thus federal laws apply.
Using the number from the permit is fine, but wouldn't you rather have a personal number,  like personnel car plates.


Logged

suka

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #21 on: January 04, 2014, 09:10:27 AM »
Quote from: Kanakamaoli23 on January 04, 2014, 08:44:41 AM
Interesting. I was at the window yesterday, and when I asked about this very subject I was told they assign the number to you.

That shows you how much the people with authority knows its own laws.

Of course this is the internet why you'd believe a total stranger hiding behind a computer.

 :wave:
Logged

Kanakamaoli23

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #22 on: January 04, 2014, 09:51:37 AM »
Quote from: suka on January 04, 2014, 09:10:27 AM
That shows you how much the people with authority knows its own laws.

Of course this is the internet why you'd believe a total stranger hiding behind a computer.

 :wave:

I think it'd be cool to be able to choose you own. I really hope I get to. I'm Going to build a couple using my kids birthdays with their initials if that's possible.
Logged

suka

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #23 on: January 04, 2014, 11:12:31 AM »
Quote from: Kanakamaoli23 on January 04, 2014, 09:51:37 AM
I think it'd be cool to be able to choose you own. I really hope I get to. I'm Going to build a couple using my kids birthdays with their initials if that's possible.


my AK receivers all match the AK parts kits numbers.


Yeap good birthday gift say its .Dec 25, 1964
.the full marking to be legal on the gun would be 
And must include the manufacture (you), city and state. Min height is 1/8" and 1/32" deep per BATF regs.


John Kealoha from  honolulu hi

KEALOHA
HON HI
JK122564
« Last Edit: January 04, 2014, 11:21:25 AM by suka »
Logged

Survivor

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #24 on: January 10, 2014, 08:55:15 AM »
Thanks for all the info regarding 80% receivers. I also wasn't aware that you had to register them after completion...getting an unregistered modern firearm was the whole point  :grrr:

Guess I'll scrap this idea.
Logged

Darmok and Jalad @Tanagra

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #25 on: January 10, 2014, 09:10:05 AM »
Quote from: Survivor on January 10, 2014, 08:55:15 AM
Thanks for all the info regarding 80% receivers. I also wasn't aware that you had to register them after completion...getting an unregistered modern firearm was the whole point  :grrr:

Guess I'll scrap this idea.

Welcome to the party, pal!!

Logged
"... the right to be let alone -- the most comprehensive of rights and the right most valued by civilized men."
--Justice Louis D. Brandeis

Kanakamaoli23

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #26 on: January 10, 2014, 03:44:54 PM »
.
« Last Edit: January 14, 2014, 06:21:39 AM by Kanakamaoli23 »
Logged

Kanakamaoli23

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #27 on: January 10, 2014, 03:47:15 PM »
.
« Last Edit: January 14, 2014, 06:21:00 AM by Kanakamaoli23 »
Logged

aieahound

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #28 on: January 11, 2014, 12:38:33 PM »
... :shaka:
« Last Edit: January 14, 2014, 01:12:56 PM by aieahound »
Logged

Kanakamaoli23

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #29 on: January 11, 2014, 05:23:41 PM »
..
« Last Edit: January 14, 2014, 06:22:52 AM by Kanakamaoli23 »
Logged

the other guy

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #30 on: January 11, 2014, 10:14:08 PM »

Quote from: Kanakamaoli23 on January 11, 2014, 05:23:41 PM
Thanks for the concern bradah Jeff. I don't mind announcing that as I plan on registering this first one that I'm finishing. Also I don't think it's a secret as to why people buy 80% ers.
Maybe the worst kept secret ?
The kind of guns you put in your walls to hold your house up hahaha
Logged

Kanakamaoli23

Re: James Madison Tactical (JMT) 80% polymer lower
« Reply #31 on: January 14, 2014, 06:22:13 AM »
..
Logged
Print
Pages: 1 [2]
« previous next »