Cleaning kits (Read 5927 times)

adeljobran718

Cleaning kits
« on: April 10, 2018, 05:32:03 PM »
Aloha everyone

As im waiting for my permit to finish processing so i can pickup my SA 1911 what do you guys reccomend for getting. What gun oil and cleaning kits do you guys recommend or is it all personal preference, i was looking at a few on amazon and theres lots of choices.

changemyoil66

Re: Cleaning kits
« Reply #1 on: April 10, 2018, 05:38:18 PM »
I like breakthrough. I dont have to scub as hard compared to ballistol. And ballistol smells like ass.

I use break throughs oil also.

Sent from my SM-G920V using Tapatalk

Flapp_Jackson

Re: Cleaning kits
« Reply #2 on: April 10, 2018, 06:02:18 PM »
If you're only cleaning after a few range visits, then a brass bristle brush is good.  That's also good for occasional thorough barrel cleaning if you normally use something less abrasive, like a Bore Snake.

I like the Stainless Steel Tornado brushes, since I clean after every range visit.  Cleans better than a nylon bristle brush, and is less abrasive than the brass.

https://www.midwayusa.com/product/764150/hoppes-tornado-style-bore-brush-stainless-steel

For the cleaning rod, I prefer the flexible cable style, like you get in the Otis cleaning kits.  Less likely to damage the bore, and easier to pull from chamber to muzzle (recommended direction). 

I normally use Ballistol for cleaning pistols.  Cleans, lubricates and prevents rust.  Not harmful to rubber or wood grips. Many threads on here discussing various cleaning and rust-prevention products, but that's my favorite.

I buy patches online when I find them on sale.  I like the Butch's Triple Twill patches.  You can also just cut up an old T-shirt, but you need to make sure the patch size works well for the barrel diameter.  Thicker shirt material = smaller patch size.

I've seen opinions that the #1 thing gun owners do to cause malfunctions is over cleaning them. 

http://guncleaninghq.com/gun-cleaning-tips/can-you-over-clean-your-gun/
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

mauiblue

Re: Cleaning kits
« Reply #3 on: April 10, 2018, 06:56:38 PM »
How about a basic 45acp pistol kit - cleaning rod, jag, brush, patches. Most sporting goods and gun shops has them. I like Breakfree CLP and been using it for years. K.I.S.S.

rklapp

Re: Cleaning kits
« Reply #4 on: April 10, 2018, 11:12:51 PM »
Balistoll does smell like ass but best for fighting rust in the tropical air, I've found. I also make my own Ed's Red solvent.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

Heavies

Re: Cleaning kits
« Reply #5 on: April 11, 2018, 03:29:42 AM »
Balistol

stangzilla

Re: Cleaning kits
« Reply #6 on: April 11, 2018, 05:45:35 AM »

drck1000

Re: Cleaning kits
« Reply #7 on: April 11, 2018, 07:20:33 AM »
All personal preference.  I learned how to clean and lube my first handgun from the salesperson that sold me the gun.  It was at shop that also had a firing range, so literally helped me clean the first time I shot the gun.

I would stay away from the kits.  I bought a pistol and rifle cleaning kits.  I think I still have the rifle kit somewhere, unopened.  Handguns don't need much.  A cleaning rod, brush head (I have bronze and nylon) and jag, and some patches.  I also have bronze and nylon brushes, but you could use old toothbrushes for much of cleaning for 1911.  I buy patches, but you can cut up old t-shirts and stuff. 

Gun oil?  I use Tetra gun oil on my handguns, but mostly because that's what I've had for a while and want to use it up before I move one.  I have stuff like Fireclean and Ballistol, but those mostly get used on my long guns.  I also have stuff like Militec and SLIP 2000 that I tried on long guns and while good, I just prefer other stuff.   

Over time, you'll develop your way of cleaning. Mine started off cleaning more thoroughly each time I shot.  Now, it's much less.  I have a number of shooting buddies who just run a boresnake.  I typically clean if I'm not going to shoot the gun for a while and I typically clean more thoroughly at specific intervals.  Kind of like car maintenance schedule. 

stangzilla

Re: Cleaning kits
« Reply #8 on: April 11, 2018, 07:35:32 AM »
i always keep a can of Ballistol in my range bag in case I need it.  good overall general CLP.  and is eco-friendly.  been around for over 100 years, they must be doing something right.
for barrel cleaning and solvent I use Hoppes #9
for a lube and protectant I use T9 Boeshield, or Lucas gun oil, froglube.  next I want to try Hornady 1 shot, heard good things about it

for my 1911 I use a cleaning/barrel rod, patches, brass bore brush and/or nylon, jag (sometimes), nylon brush (or toothbrush).

drck1000

Re: Cleaning kits
« Reply #9 on: April 11, 2018, 07:42:38 AM »
i always keep a can of Ballistol in my range bag in case I need it.  good overall general CLP.  and is eco-friendly.  been around for over 100 years, they must be doing something right.
for barrel cleaning and solvent I use Hoppes #9
for a lube and protectant I use T9 Boeshield, or Lucas gun oil, froglube.  next I want to try Hornady 1 shot, heard good things about it

for my 1911 I use a cleaning/barrel rod, patches, brass bore brush and/or nylon, jag (sometimes), nylon brush (or toothbrush).
I also use Hoppes #9 for barrel cleaning.  I also have a foaming copper boresnake that I use from time to time. 

I use Ballistol at the last patch through the barrel after cleaning as well as quick wipe on guns that are going to be stored for a while. 

For range bag, I think I have a small bottle of Fireclean and I small bottle of Mpro7 oil.  Fireclean mostly for use on AR and MPro 7 mostly for handguns.  Rarely use either though.  Maybe the Fireclean if I'm shooting a class. 

stangzilla

Re: Cleaning kits
« Reply #10 on: April 11, 2018, 07:54:44 AM »
when cleaning the 1911, watch out for the idiot scratch!  haha.

gun oil test review
this is be a good read.  old article but has a lot of info on 46 different gun oils/CLP/protectants
http://www.dayattherange.com/?page_id=3667
« Last Edit: April 11, 2018, 05:53:36 PM by stangzilla »

Inspector

Re: Cleaning kits
« Reply #11 on: April 11, 2018, 06:33:07 PM »
I gave away all my brass and aluminum cleaning rods and bought carbon fiber pistol and rifle rods.

For normal cleaning, lubrication and storage I use Hoppe's #9 solvent and Break Free CLP. For heavy carbon build up I use M-Pro 7. I now use Fire Clean in all areas that get heavy carbon build up especially on my revolvers. I clean the revolver thoroughly and then soak the areas that get carbon with the Fire Clean and put the gun away. Next time I fire it the carbon dosn't build up due to the Fire Clean being soaked in to the metal. So no need for M-Pro 7 any more. I also use a spray cleaner like Gun Scrubber or Barrel Blaster for parts I don't want to disassemble during that particular cleaning session such as rifle bolts. And I keep a can of Balistol in my range bag.
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

changemyoil66

Re: Cleaning kits
« Reply #12 on: April 12, 2018, 08:54:05 AM »
All personal preference.  I learned how to clean and lube my first handgun from the salesperson that sold me the gun.  It was at shop that also had a firing range, so literally helped me clean the first time I shot the gun.

I would stay away from the kits.  I bought a pistol and rifle cleaning kits.  I think I still have the rifle kit somewhere, unopened.  Handguns don't need much.  A cleaning rod, brush head (I have bronze and nylon) and jag, and some patches.  I also have bronze and nylon brushes, but you could use old toothbrushes for much of cleaning for 1911.  I buy patches, but you can cut up old t-shirts and stuff. 

Gun oil?  I use Tetra gun oil on my handguns, but mostly because that's what I've had for a while and want to use it up before I move one.  I have stuff like Fireclean and Ballistol, but those mostly get used on my long guns.  I also have stuff like Militec and SLIP 2000 that I tried on long guns and while good, I just prefer other stuff.   

Over time, you'll develop your way of cleaning. Mine started off cleaning more thoroughly each time I shot.  Now, it's much less.  I have a number of shooting buddies who just run a boresnake.  I typically clean if I'm not going to shoot the gun for a while and I typically clean more thoroughly at specific intervals.  Kind of like car maintenance schedule.

HFR did the same for me with my 1st pistol and AR.  And when I bought a another pistol, KM showed me how to disassemble and lube.  I youtube'd it, but for me seeing it in person helps way more.

normanjons

Re: Cleaning kits
« Reply #13 on: April 25, 2018, 02:55:02 AM »
Hi,
we know Cleaning kit and oil is main factor. Now it;s depend upto you. I have been using Otis cleaning kit. Now gun oil, recently I bought Slip 2000 EWL.
You can read this article How to Clean & Lubricate a Gun. You can also check gun oil reviews here.