2aHawaii

General Topics => General Discussion => Topic started by: BLKDRGN on March 17, 2014, 11:02:33 PM

Title: Help Build an AR-15
Post by: BLKDRGN on March 17, 2014, 11:02:33 PM
This will be for my wife so it has to be light. It's mainly for home defense/plinking. I think we want to go with gas Mid length. I think weight will be the biggest thing about this build. Budget is $2k but of course it doesn't mean to pick all expensive parts so it reaches that budget. You don't have to pick all the parts, just point me in the right direction and I will choose. BTW, I know several people who can put it together so you can rule out me building it.

I already have a DPMS LR-05K lower receiver that I got for free so we can mark that off.

I copied and pasted this from another website. You guys also said the trigger, barrel, and bolt should come first as far as choosing better parts for. Also keep in mind that for now until people help out, I'm just Googling things and just sticking it on the list.


AR-15 Mid-Length

1.   Barrel – Adams Arms 16” Mid-Length Ultra Lite VooDoo 1:7 Twist       
      http://www.adamsarms.net/16-mid-length-evo-ultra-lite-barrel (http://www.adamsarms.net/16-mid-length-evo-ultra-lite-barrel)

2.   Trigger – Hiperfire Hipertouch 24E
       http://www.hiperfire.com/hipertouch24e.html (http://www.hiperfire.com/hipertouch24e.html)

3.   Gas Block – BTE Micro Adjustable .625 Bore
       http://bte-usa.com/parts/micro-gasblocks.htm (http://bte-usa.com/parts/micro-gasblocks.htm)

4.   JP Enterprises
     •   Bolt Carrier Assembly - JP Enterprises JPBC-3A .223
        http://www.jprifles.com/buy.php?item=JPBC-3A (http://www.jprifles.com/buy.php?item=JPBC-3A)

     •   Silent Capture Spring – JP Enterprises JPSCS-15
        http://www.jprifles.com/buy.php?item=JPSCS-15 (http://www.jprifles.com/buy.php?item=JPSCS-15)

     •   Muzzle Compensator – JP Enterprises JPTRE-2
        http://www.jprifles.com/buy.php?item=JPTRE-2 (http://www.jprifles.com/buy.php?item=JPTRE-2)

5.   Upper Receiver – Aero Precision without forward assist
       http://aeroprecisionusa.com/upper-receviers/ar15-stripped-upper-receiver-no-forward-assist.html (http://aeroprecisionusa.com/upper-receviers/ar15-stripped-upper-receiver-no-forward-assist.html)

6.   Handguard – Midwest Industries GEN2 SS-Series One Piece Free Float 12” Mid-Length
       https://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=450 (https://www.midwestindustriesinc.com/index.cfm?fuseaction=category.display&category_ID=450)

7.   DPMS Lower Receiver Kit

8.   MidwayUSA

     •   Butt Stock – Magpul CTR Carbine Mil Spec
        http://www.midwayusa.com/product/2319164110/magpul-stock-ctr-collapsible-ar-15-carbine-synthetic?cm_vc=ProductFinding (http://www.midwayusa.com/product/2319164110/magpul-stock-ctr-collapsible-ar-15-carbine-synthetic?cm_vc=ProductFinding)

     •   Gas Tube – DPMS AR-15 Mid Length
        http://www.midwayusa.com/product/1413288594/dpms-gas-tube-ar-15-lr-308?cm_vc=ProductFinding (http://www.midwayusa.com/product/1413288594/dpms-gas-tube-ar-15-lr-308?cm_vc=ProductFinding)

     •   Gas Tube Roll Pin – DPMS AR-15
       http://www.midwayusa.com/product/384068/dpms-gas-tube-roll-pin-ar-15-lr-308?cm_vc=ProductFinding (http://www.midwayusa.com/product/384068/dpms-gas-tube-roll-pin-ar-15-lr-308?cm_vc=ProductFinding)

     •   Buffer Tube  – UTG Extension Buffer Tube 6-Position Mil-Spec
      http://www.midwayusa.com/product/937252/utg-receiver-extension-buffer-tube-6-position-mil-spec-diameter-ar-15-carbine-aluminum-matte?cm_vc=ProductFinding (http://www.midwayusa.com/product/937252/utg-receiver-extension-buffer-tube-6-position-mil-spec-diameter-ar-15-carbine-aluminum-matte?cm_vc=ProductFinding)

     •   Buffer Tube Lock Ring – DPMS AR-15
      http://www.midwayusa.com/product/718153/dpms-receiver-extension-buffer-tube-lock-ring-ar-15-lr-308-carbine?cm_vc=ProductFinding (http://www.midwayusa.com/product/718153/dpms-receiver-extension-buffer-tube-lock-ring-ar-15-lr-308-carbine?cm_vc=ProductFinding)

     •   Buffer Tube End Plate – DPMS AR-15
       http://www.midwayusa.com/product/645904/dpms-receiver-extension-buffer-tube-end-plate-ar-15-lr-308-carbine?cm_vc=ProductFinding (http://www.midwayusa.com/product/645904/dpms-receiver-extension-buffer-tube-end-plate-ar-15-lr-308-carbine?cm_vc=ProductFinding)

     •   Trigger Guard – Magpul MIAD enhanced Aluminum
       http://www.midwayusa.com/product/114195/magpul-trigger-guard-miad-enhanced-ar-15-aluminum-matte?cm_vc=ProductFinding (http://www.midwayusa.com/product/114195/magpul-trigger-guard-miad-enhanced-ar-15-aluminum-matte?cm_vc=ProductFinding)

     •   Ejection Port – DPMS Cover Assembly
      http://www.midwayusa.com/product/888007/dpms-ejection-port-cover-assembly-ar-15-matte?cm_vc=ProductFinding (http://www.midwayusa.com/product/888007/dpms-ejection-port-cover-assembly-ar-15-matte?cm_vc=ProductFinding)

     •   Extended Bolt Catch – Magpul BAD Lever
      http://www.midwayusa.com/product/769721/magpul-bad-lever-extended-bolt-catch-ar-15-aluminum-matte (http://www.midwayusa.com/product/769721/magpul-bad-lever-extended-bolt-catch-ar-15-aluminum-matte)

9.   Lower Receiver – DPMS LR-05K

10.   Charging Handle – BCMGUNFIGHTER 5.56 MOD 5 (Small) Latch

11.   Magazines – Magpul PMAG AR/M4 Gen M3 Windowed

12.   Backup Iron Sights – Magpul Gen 2 MBUS
     •   Front
           http://www.amazon.com/exec/obidos/ASIN/B004SH9OUS/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B004SH9OUS/?tag=2ahawaii-20)
     •   Rear
           http://www.amazon.com/exec/obidos/ASIN/B004RR0N8Q/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B004RR0N8Q/?tag=2ahawaii-20)

13.   Red Dot Sight – Aimpoint Micro H-1 2MOA
      http://www.amazon.com/exec/obidos/ASIN/B007R6AF9Q/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B007R6AF9Q/?tag=2ahawaii-20)
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 17, 2014, 11:04:17 PM
So far I'm pretty lost on choosing a barrel. Most say Novesky is great but they have so many that I don't know what to pick. No idea what a no gas, lo-pro gas, switchblock, lightweight contour, etc. is.
Title: Re: Help Build an AR-15
Post by: Bigkahuna808 on March 17, 2014, 11:05:04 PM
Whiteoak if you can get.one they are on a huge backlog
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 17, 2014, 11:13:02 PM
Whiteoak if you can get.one they are on a huge backlog

I went to their website and it say 4-6 month backlog. I don't want to wait that long.
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 17, 2014, 11:16:30 PM
So far I'm pretty lost on choosing a barrel. Most say Novesky is great but they have so many that I don't know what to pick. No idea what a no gas, lo-pro gas, switchblock, lightweight contour, etc. is.

No gas  = no gas block, the barrel comes stripped
Lo-pro gas = low profile gas block will fit under most rails
Switch blck = reduce gas blow back if you're running suppressed
Light weight profile = thinner profile: skinnier,  thus lighter weight.  Heats up faster during rapid fire vs. std barrels

Did you decide on who's building it?
Title: Re: Help Build an AR-15
Post by: OldFaithful on March 17, 2014, 11:20:02 PM
1. AR-15 lower receiver - DPMS LR-05K - Free
2. AR-15 upper receiver
Depends if you want one put together already, or from parts, BCM makes a good lightweight upper
3. Lower receiver parts kit
Doesnt really matter, the main difference is the trigger pull
4. Upper receiver parts kit
See 2.
5. Lower receiver extension (aka: the buffer tube)
Brownells has a receiver extension kit that includes 6 position tube, spring, castle nut and end plate
6. Buffer
Depends on the gas system.  Carbine length=H or H2, Mid-length- H, maybe standard carbine
7. Buffer spring
See 5.
8. Barrel (a carbine length gas system would be typical for this build)
If going carbine length gas, a 14.5 pinned would be good.  16 inch is fine with carbine, but will have slightly more wear to the gun due to more violent action (not something really proven yet as far as I know though)  But that's why you use a H or H2 buffer.  If you want lightweight get some form of lightweight profile barrel.  The barrels in DD guns, BCM and maybe noveske are all made by FN.
9. Hand-guards (length will depend on what length gas system you chose on your barrel: carbine, mid-length, or rifle)
If you're going for lightweight get the magpul hand guards.  If you want an actual rail, go for a daniel defense one (they're stupidly light)
10. Bolt carrier group (carrier, bolt, firing pin, cam, extractor, ejector and spring)
BCM has a good bolt.
11. Collapsible stock
Personal preference
12. At least one magazine
Pmags, or lancer awf
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 17, 2014, 11:29:31 PM
No gas  = no gas block, the barrel comes stripped
Lo-pro gas = low profile gas block will fit under most rails
Switch blck = reduce gas blow back if you're running suppressed
Light weight profile = thinner profile: skinnier,  thus lighter weight.  Heats up faster during rapid fire vs. std barrels

Did you decide on who's building it?

I looked and Novesky offers a "lightweight contour barrel, 6.8". It says 12.5" is for carbine. I thought Hawaii has to be 16" which their site say is Mid.

No decision on who's building it. Can't be that hard right with the correct tools?
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 17, 2014, 11:37:18 PM
8. Barrel (a carbine length gas system would be typical for this build)[/b]
If going carbine length gas, a 14.5 pinned would be good.  16 inch is fine with carbine, but will have slightly more wear to the gun due to more violent action (not something really proven yet as far as I know though)  But that's why you use a H or H2 buffer.  If you want lightweight get some form of lightweight profile barrel.  The barrels in DD guns, BCM and maybe noveske are all made by FN.

Really?  I swear the DD CHF barrels are made at their main plant in GA:

All Daniel Defense cold hammer forged barrels are made from start to finish in our state-of-the-art facility located in Black Creek, GA. In keeping with our heritage of not cutting corners, all cold hammer forged barrels feature a forged chamber and heavy phosphate exterior coating. They are all MP tested on-site and are available in multiple configurations which includes barrel only (stripped); barrel with front sight base; barrel with low profile gas block; and barrel with front sight base, gas tube, and delta ring assembly (Complete). These barrels will prove themselves to be more accurate and last longer than a barrel that has cut or button rifling.

9.  Not necessarily.  If you have a lo pro gas block you could run any length handguard you want.  You could have a 16" barrel with a 15" handguard.  If you want light weight go keymod or carbon fiber.  They'll be lighter than any standard ris system.  Lancer is a good solid company in carbon fiber.  If you want to go tactigucci go Christensen Arms. In key mod you can't go wrong with Noveske or KAC.

10.  Get a bolt from the same manufacturer as your barrel.  That should save your gunsmith time in making sure they interface correctly.   

Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 17, 2014, 11:42:46 PM
I looked and Novesky offers a "lightweight contour barrel, 6.8". It says 12.5" is for carbine. I thought Hawaii has to be 16" which their site say is Mid.

No decision on who's building it. Can't be that hard right with the correct tools?

1. 6.8 SPC - not the same as 5.56/.223 it's a different caliber all together.  If that's what you want that's fine.
2.  If you're not a licensed gunsmith do you really want to be mucking around with things that go boom?  If you assemble it yourself you're assuming all the responsibilities/liabilities that goes with that.  If your head spacing is off and your gun has a KB malfunction and hurts someone else, could you live with that?  Would you want to risk it? 
Title: Re: Help Build an AR-15
Post by: OldFaithful on March 17, 2014, 11:42:57 PM
Maybe not DD, but I know FN makes a lot of the barrels on the market; and they're top quality.
Title: Re: Help Build an AR-15
Post by: sliver on March 17, 2014, 11:45:15 PM
im gonna sorta copy oldfaithful and put my answers in there

BTW:  IF you think weight is gonna be an issue, you should go to a gunstore with a lot of ar's and feel them all to see what combo of parts weight before putting together what you want.  perhaps you might find something you might want to buy outright and keep for yourself...


1. AR-15 lower receiver - DPMS LR-05K - Free

If you want to really go light, go and buy a new frontier polymer lower which is considerably lighter then metal ones.  Might I suggest Xring.

2. AR-15 upper receiver
I'd just buy a complete upper with bcg and charging handle in one.  Actually, I would suggest Rainier Arms Raptor Ambidextrous Charging Handle found here https://www.rainierarms.com/?page=shop/detail&product_id=3172 (https://www.rainierarms.com/?page=shop/detail&product_id=3172) if you can afford it.  it really is quite nice.



3. Lower receiver parts kit
Doesnt really matter, if you do want a very nice trigger though, I'd go with a Geissele Hi-Speed National Match - Designated Marksman Rifle (DMR) Trigger $279.00  found at http://geissele.com/triggers.html (http://geissele.com/triggers.html)  Don't know if this will work with a new frontier polymer lower.

4. Upper receiver parts kit
See 2.

5. Lower receiver extension (aka: the buffer tube)
anything, you aren't going in to combat and you aren't going for a sniper setup.  Buy what you think is quality and is in your price range.  You aren't gonna be able to tell the difference between a milspec or a commercial buffer tube.

6. Buffer
Depends on the gas system.  Carbine length=H or H2, Mid-length- H, maybe standard carbine

7. Buffer spring
See 5.

8. Barrel (a carbine length gas system would be typical for this build)
If going carbine length gas, a 14.5 pinned would be ok (this would pretty much just be a middle finger to the atf basically).  16 inch is fine with carbine.  I don't agree that there will be more wear for how much you'll be shooting.  I'd be very surprise if you could afford to shoot out a barrel in today's world where ammo cost so much.   Do you need a chrome lined barrel?  Well are you going to be bump firing 100 round mags or doing full auto 100 round mag dumps regularly?  If not, you don't really need it.  It's also a bit less accurate but I doubt you or 99% of us would be able to tell to be honest.  The twist rate and length would really depend on the weight bullet you are going to be firing.  do some research on this for yourself.  for your purposes, I'd think the shorter the better.

9. Hand-guards (length will depend on what length gas system you chose on your barrel: carbine, mid-length, or rifle)
Depends on what you want or need.  quad rail?  free floating?  carbon fiber?  Its all personal preference, the sky's the limit.  I like my quad rails but that's just me (I like to put a bipod on the bottom and a flip up front sight on the front).


10. Bolt carrier group (carrier, bolt, firing pin, cam, extractor, ejector and spring)
anything which has grade 8 screws and is staked properly.  You honestly will probably not be able to tell the difference if it is nickel boron coated or what not.  As long as you keep your gun clean and lubed (which I think all ar15's need to be in order to run smoothly) you'll be fine.


11. Collapsible stock
Personal preference.  Unless you have something in mind that you really want, I'd buy the cheapest out there just to start out with since you don't really know what to expect.  What I wouldn't do is waste time on a Recoil-reducing stock.  This is a .223 or a 5.56, not a 12guage high brass slug or 50cal bmg round we are talking about!  Recoils is as light as it gets for rifles!!!  I mean the only thing lower (practically) would perhaps be a .22lr


12. At least one magazine
2nd gen or 3rd gen Pmags with or without windows, they run fine.  Cheap now adays and I'd buy at least 10 (why 10?  I say why not!  hell buy 20)
also, get one of these because reloading sucks! http://www.midwayusa.com/product/170129/surefire-magazine-ar-15-223-remington-100-round-aluminum-matte?cm_vc=ProductFinding (http://www.midwayusa.com/product/170129/surefire-magazine-ar-15-223-remington-100-round-aluminum-matte?cm_vc=ProductFinding)


Title: Re: Help Build an AR-15
Post by: sliver on March 17, 2014, 11:47:00 PM
1. 6.8 SPC - not the same as 5.56/.223 it's a different caliber all together.  If that's what you want that's fine.
2.  If you're not a licensed gunsmith do you really want to be mucking around with things that go boom?  If you assemble it yourself you're assuming all the responsibilities/liabilities that goes with that.  If your head spacing is off and your gun has a KB malfunction and hurts someone else, could you live with that?  Would you want to risk it?


+1, Unless you know how to check headspace and are willing to pay for the equipment to do so, just buy an upper which is put together already.  You really don't save any money by putting it together yourself and you really do not want to risk playing with the pressures .223 or a 5.56 round will make! 

Btw:  I wouldn't suggest you trusting someone (a buddy which thinks he knows what he is doing when putting an upper together) else to check your head spacing when putting together your rifle.  It's not their ass, hand, arm, or face on the line if something goes wrong.  You think a handgun going kaboom is bad, wait till you see what a rifle round can/will do...

I always like to check Midwayusa.com to see what is available (just type in ar15 uppers into the search box) as well as palmetto state armory.  Remember, you can slap any upper on to your lower so if you don't like it, sell it if you want to and buy another upper or keep it as a back up or something to modify/play around with.  Everyone needs an upper they can use with their slidefire. 

Whatever you do, do not buy a 7-14 inch barreled upper and slap it on to your lower as that would be a felony (its legal to own, not legal to put together or to use).  If you have a pistol lower which is regged and modded to be legal, it would be ok but if not, you really don't wanna go to jail for committing a felony!

Lastly, instead of a 6.8 SPC, you might want to take a look at the .300aac blackout.  For the distances and purposes you are shooting at, it doesn't make sense to go with a 6.8 SPC.
Title: Re: Help Build an AR-15
Post by: sliver on March 18, 2014, 12:13:25 AM

No decision on who's building it. Can't be that hard right with the correct tools?

the lower is not too hard (even with the wrong tools) but it is hard to get the upper right the first time, especially the upper's headspace.
Title: Re: Help Build an AR-15
Post by: suka on March 18, 2014, 04:50:57 AM
To assemble the upper will require head space gauges and the barrel extension wrench, since the bolt turns and lock , it must be headspaced correctly. Incorrect headspace can be a big problem. Stick with a preassembled upper.

The lower is simple and lots of info on AR15.com and YouTube,

Look for used parts on the EE. (Ar15 classified).
I built a complete  AR , less receiver for $400
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 18, 2014, 06:43:32 AM
Are you building this to use at the HDF range day?
Title: Re: Help Build an AR-15
Post by: ImKu on March 18, 2014, 07:05:42 AM
http://www.tieronearms.com/Noveske-Recon-Upper-NSR-LW-p/reconnsr-16lw.htm (http://www.tieronearms.com/Noveske-Recon-Upper-NSR-LW-p/reconnsr-16lw.htm)

http://www.tieronearms.com/Noveske-Afghan-NSR-p/afghannsr135nsr.htm (http://www.tieronearms.com/Noveske-Afghan-NSR-p/afghannsr135nsr.htm)

http://www.bravocompanyusa.com/BCM-AR15-Upper-Receiver-Group-AR15-s/118.htm (http://www.bravocompanyusa.com/BCM-AR15-Upper-Receiver-Group-AR15-s/118.htm)

Found some complete uppers if you decide to go that route, soo many options that I just put some that I am looking at for myself... I may want another one now... :thumbsup:

Title: Re: Help Build an AR-15
Post by: Growler67 on March 18, 2014, 09:57:18 AM
So far I'm pretty lost on choosing a barrel. Most say Novesky is great but they have so many that I don't know what to pick. No idea what a no gas, lo-pro gas, switchblock, lightweight contour, etc. is.

I went with a Daniel Defense 16" Lightweight barrel (referred to by most as a "pencil" profile barrel) for mine. https://danieldefense.com/cold-hammer-forged-barrels/16-inch-chf-barrels/16-5-56mm-1-7-lw-profile.html (https://danieldefense.com/cold-hammer-forged-barrels/16-inch-chf-barrels/16-5-56mm-1-7-lw-profile.html)

I also chose the YMG Match LITE BCG https://www.rainierarms.com/?page=shop/detail&product_id=1010 (https://www.rainierarms.com/?page=shop/detail&product_id=1010)

I've had NO cycling problems ever and am using a standard "H" buffer though I have an "H2" as a spare.  Lightweight or Pencil barrels just don't have the extra bulk that "standard" or military profile barrels do.  If you look at a standard barrel you will see it is thicker from the muzzle end to just in front of where the FSP or gas block would be mounted, then there is a thinner section and then it goes back to the thicker diameter before approaching the increasing taper diameter at the chamber end.  In a Pencil barrel that extra material is milled off giving the barrel a smoother appearance from muzzle to chamber end.....milling off that extra material reduces the overall weight of the barrel while not compromising its abilities.  It will heat up a little faster but that shouldn't be a problem for your intended purposes....you aren't going to be engaged in a prolonged firefight with rapid cycling.....or.....nevermind  :shaka:
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 10:21:44 AM
1. 6.8 SPC - not the same as 5.56/.223 it's a different caliber all together.  If that's what you want that's fine.
2.  If you're not a licensed gunsmith do you really want to be mucking around with things that go boom?  If you assemble it yourself you're assuming all the responsibilities/liabilities that goes with that.  If your head spacing is off and your gun has a KB malfunction and hurts someone else, could you live with that?  Would you want to risk it?

Oh, I didn't know the numbers were the caliber sizes. So does that mean the "Lightweight Contour Barrel, 556" comes only as a Mid system with 14.5" and 16"? Does the length of the barrel determine if it's carbine or mid?
Title: Help Build an AR-15
Post by: Jl808 on March 18, 2014, 10:37:36 AM
I like the suggestion of building the lower and buying the upper. :thumbsup:

Building a lower teaches you a lot about how the AR is built. you can always build another upper later on.
Title: Re: Help Build an AR-15
Post by: ImKu on March 18, 2014, 10:39:11 AM
Oh, I didn't know the numbers were the caliber sizes. So does that mean the "Lightweight Contour Barrel, 556" comes only as a Mid system with 14.5" and 16"? Does the length of the barrel determine if it's carbine or mid?

Difference between mid and carbine is the gas system.  That is its own debate on which is "better"...  Different barrel contours is basically different weights.
Title: Re: Help Build an AR-15
Post by: aieahound on March 18, 2014, 10:46:15 AM
https://2ahawaii.com/index.php?topic=11546.0

Make an offer on the upper. Seems to have everything you want.

It's been for sale for a while.

Just a thought.
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 18, 2014, 10:46:42 AM
Oh, I didn't know the numbers were the caliber sizes. So does that mean the "Lightweight Contour Barrel, 556" comes only as a Mid system with 14.5" and 16"? Does the length of the barrel determine if it's carbine or mid?

1) Not necessarily - manufacturer's update their inventory constantly so just cuz you don't see it one day doesn't mean necessarily that they don't make it, they could just be out of stock.  You can contact their sales dept to make sure if they do make it and when they might expect it back in stock if they do.

2) The barrel length really doesn't dictate where the manufacturer puts the gas block holes  - you could place the gas block wherever you wanted so longs as you had the gas port holes in the right place.

Barrel Length             DI Gas systems you'll commonly find associated with this barrel length
14.5"                          Carbine or Mid
16"                             Mid
18"                             Mid or Rifle length
20"                             Rifle

Because Gas System length is not tied to any one particular barrel length, you get all kinds of different and unique choices.  You'll see on the Noveske site something called and intermediate length which from what I can tell is somewhere in between Mid and Rifle length.  I also know that Knight's also does something similar to Noveske and that they have a unique gas system length that is somewhere between mid length and rifle length.

Here's an article I found helpful and you may too:

http://www.thetruthaboutguns.com/2012/06/foghorn/ask-foghorn-gas-system-length-ar-15/ (http://www.thetruthaboutguns.com/2012/06/foghorn/ask-foghorn-gas-system-length-ar-15/)

Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 12:09:17 PM
I changed it to mid length and changed some parts around
Title: Re: Help Build an AR-15
Post by: suka on March 18, 2014, 12:20:16 PM
Just bought one of these last night.
Notice to full auto detent?
I have something speacial for that!
A happy button.   ;D



(http://www.spikestactical.com/images/prodimg/STLCFZ4.jpg)
Title: Re: Help Build an AR-15
Post by: macsak on March 18, 2014, 12:32:51 PM
I changed it to mid length and changed some parts around

you are missing the lower parts kit
a complete kit will come with a mil-spec trigger, but you will not use that
Title: Help Build an AR-15
Post by: dustoff003 on March 18, 2014, 02:07:19 PM
Once you see the dicks you cannot un-see the dicks.
(http://img.tapatalk.com/d/14/03/19/y6agyzyd.jpg)(http://img.tapatalk.com/d/14/03/19/e7y8ybu2.jpg)(http://img.tapatalk.com/d/14/03/19/nunyhu9a.jpg)
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 03:03:07 PM
I think I got everything I need. Does it look ok?
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 18, 2014, 03:14:42 PM
I think I got everything I need. Does it look ok?

I think you're missing the trigger guard unless you already got one or your lower came with one.  Your buffer tube assembly comes with the castle nut already, but I see you also have another one in your list so that might be a duplicate unless you're going to swap one out for the other. 
Title: Re: Help Build an AR-15
Post by: macsak on March 18, 2014, 03:14:50 PM

I think I got everything I need. Does it look ok?

Was it easier/cheaper to get all the separate parts like that?
Or just get a lower parts kit ?
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 03:25:39 PM
Was it easier/cheaper to get all the separate parts like that?
Or just get a lower parts kit ?

IDK? Someone said that the kit comes with a trigger that I don't need so I tried to figure out what I needed seperately.
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 03:27:02 PM
I think you're missing the trigger guard unless you already got one or your lower came with one.  Your buffer tube assembly comes with the castle nut already, but I see you also have another one in your list so that might be a duplicate unless you're going to swap one out for the other.

Good catch. I'll update it when I get home. Thanks!
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 18, 2014, 03:31:32 PM
Sorry but one more thing, muzzle device?  A2 birdcage would be the most inexpensive and easy to find...
Title: Re: Help Build an AR-15
Post by: Surf on March 18, 2014, 04:28:05 PM
I would strongly suggest visiting a site like m4carbine.net and reading as many stickies as possible. 
Title: Re: Help Build an AR-15
Post by: macsak on March 18, 2014, 05:07:31 PM
I would strongly suggest visiting a site like m4carbine.net and reading as many stickies as possible.

pay close attention to any posts by someone with the screen name of "surf"
do not assume that it is the same guy on this forum
 :shaka:
these are not the droids you are looking for
 :thumbsup:
Title: Re: Help Build an AR-15
Post by: SpeedTek on March 18, 2014, 06:33:19 PM
https://2ahawaii.com/index.php?topic=11546.0

Make an offer on the upper. Seems to have everything you want.

It's been for sale for a while.

Just a thought.

Hey I get first dibs on ANYTHING you sell....
Title: Re: Help Build an AR-15
Post by: SpeedTek on March 18, 2014, 06:37:49 PM
Once you see the dicks you cannot un-see the dicks.
(http://img.tapatalk.com/d/14/03/19/y6agyzyd.jpg)(http://img.tapatalk.com/d/14/03/19/e7y8ybu2.jpg)(http://img.tapatalk.com/d/14/03/19/nunyhu9a.jpg)

You and Macsak have a lot in common
Title: Re: Help Build an AR-15
Post by: dustoff003 on March 18, 2014, 07:44:48 PM

You and Macsak have a lot in common
Hahahahaha! Thanks Speedie I could think of worse folks to have stuff in common with than good ole Mac.
Title: Re: Help Build an AR-15
Post by: dogman on March 18, 2014, 07:53:02 PM
IDK? Someone said that the kit comes with a trigger that I don't need so I tried to figure out what I needed seperately.
You can get a LPK without trigger group-DPMS, CMMG among others, I've bought them from SEC, OGC and KGS although it looks like you're going all mail order. I think you are missing the take down and pivot pin detents and springs and the buffer retainer and retainer spring which would be in a LPK.
Title: Re: Help Build an AR-15
Post by: macsak on March 18, 2014, 08:05:35 PM
You and Macsak have a lot in common

we both like chewbacca?
Title: Re: Help Build an AR-15
Post by: dogman on March 18, 2014, 08:43:09 PM
I see a take down pin but no front pivot pin, also an item that's included in a LPK. You're getting a stripped upper, you may or may not want to install an ejection port cover, and I didn't see a charging handle.
Title: Re: Help Build an AR-15
Post by: SpeedTek on March 18, 2014, 09:28:26 PM
we both like chewbacca?

Chewing Baka?
Title: Re: Help Build an AR-15
Post by: SpeedTek on March 18, 2014, 09:35:27 PM
At a local LGS for only $ 24.95 Made in USA
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 10:01:11 PM
I updated my list again. I was at a store picking up my order and I saw a DPMS lower receiver kit so I picked it up. I swapped out for another barrel since this one is in stock. I also added the trigger guard and longer handguard. I still don't know what kind backup iron sights to choose and red dot.
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 10:02:33 PM
At a local LGS for only $ 24.95 Made in USA

Sorry Dex, a little late now as I just picked one up. At least it's your cousin.
Title: Re: Help Build an AR-15
Post by: sliver on March 18, 2014, 11:26:52 PM
so you are not going with a slide release extension like a magpul bad or the extended one which replaces the stock piece?
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 18, 2014, 11:38:51 PM
so you are not going with a slide release extension like a magpul bad or the extended one which replaces the stock piece?

I don't know what that is. I'll have to research it. Remember I'm a noob so I don't know what I'm doing yet.

Is this it? http://www.midwayusa.com/product/769721/magpul-bad-lever-extended-bolt-catch-ar-15-aluminum-matte (http://www.midwayusa.com/product/769721/magpul-bad-lever-extended-bolt-catch-ar-15-aluminum-matte)
Title: Re: Help Build an AR-15
Post by: sliver on March 19, 2014, 12:04:46 AM
I don't know what that is. I'll have to research it. Remember I'm a noob so I don't know what I'm doing yet.

Is this it? http://www.midwayusa.com/product/769721/magpul-bad-lever-extended-bolt-catch-ar-15-aluminum-matte (http://www.midwayusa.com/product/769721/magpul-bad-lever-extended-bolt-catch-ar-15-aluminum-matte)


yeah, its so that you can release the bolt by using you trigger finger/right hand. 

you might also want to take a look at the ar 15 anti walk trigger pins, there are a few on the market and since your building up your gun, its something else you can add on.  I've never had a problem with mines but I don't shoot thousands of rounds at a time where it might become a problem.


BTW: how did you decide on the HIPERTOUCH trigger?  have you felt it before on someone elses gun?  I'd be scare to throw 200 dollars on a trigger I have not felt before.
Title: Re: Help Build an AR-15
Post by: aieahound on March 19, 2014, 09:09:08 AM
One thing to consider:

Always keep a back up set of lower parts replacement springs.

For when one inevitably goes flying across the room.  ( or is that just me  ::) ) 
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 19, 2014, 11:25:06 AM

yeah, its so that you can release the bolt by using you trigger finger/right hand. 

you might also want to take a look at the ar 15 anti walk trigger pins, there are a few on the market and since your building up your gun, its something else you can add on.  I've never had a problem with mines but I don't shoot thousands of rounds at a time where it might become a problem.


BTW: how did you decide on the HIPERTOUCH trigger?  have you felt it before on someone elses gun?  I'd be scare to throw 200 dollars on a trigger I have not felt before.

My friend has that trigger. http://8541tactical.com/2014/01/07/hiperfire-hipertouch-24e-trigger-review/ (http://8541tactical.com/2014/01/07/hiperfire-hipertouch-24e-trigger-review/)
Title: Re: Help Build an AR-15
Post by: sworbeyegib on March 19, 2014, 11:44:53 AM
One thing to consider:

Always keep a back up set of lower parts replacement springs.

For when one inevitably goes flying across the room.  ( or is that just me  ::) )

I got laughed at when I told someone I sometimes work on my gun inside of a white trash bag.  It works though!
Title: Re: Help Build an AR-15
Post by: sliver on March 19, 2014, 11:53:31 AM
My friend has that trigger. http://8541tactical.com/2014/01/07/hiperfire-hipertouch-24e-trigger-review/ (http://8541tactical.com/2014/01/07/hiperfire-hipertouch-24e-trigger-review/)

ahhh I see.  It is always good to be able to test a trigger out before sinking enough money to buy another 10/22 on a trigger you may not like. 
Title: Re: Help Build an AR-15
Post by: sliver on March 19, 2014, 12:07:14 PM
just saw this deal http://palmettostatearmory.com/index.php/p-tac-blackhawk-lower-parts-kit.html?utm_source=Daily+Deal+AR-15+Build+Kits&utm_campaign=Constant+Contact&utm_medium=email (http://palmettostatearmory.com/index.php/p-tac-blackhawk-lower-parts-kit.html?utm_source=Daily+Deal+AR-15+Build+Kits&utm_campaign=Constant+Contact&utm_medium=email)

only 35 bucks for a lower parts kit, pretty good deal.
Title: Re: Help Build an AR-15
Post by: Dirtyc on March 19, 2014, 12:32:12 PM
Look at rainer arms barrels they got different types for what ever purpose you are making the rifle for
Title: Re: Help Build an AR-15
Post by: sliver on March 19, 2014, 01:21:05 PM
Look at rainer arms barrels they got different types for what ever purpose you are making the rifle for

I do like those barrels, they start off as Shilen blanks.  they are chambered for .223 though.  careful about using 5.56 in them.

sub-moa guaranteed... 
Title: Re: Help Build an AR-15
Post by: GotFirearms? on March 19, 2014, 01:34:06 PM
One thing to consider:

Always keep a back up set of lower parts replacement springs.

For when one inevitably goes flying across the room.  ( or is that just me  ::) )

That's funny you said that cause that happened to me so now when building things with little springs I assemble it in a clear plastic
Bag so if it springs away it stays in the bag :thumbsup:
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 19, 2014, 01:40:04 PM
I was looking at the Aimpoint H-1 but Amazon only has free shipping for the 4 MOA. Is that too much for my setup?

http://www.amazon.com/exec/obidos/ASIN/B0017DGLJI/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B0017DGLJI/?tag=2ahawaii-20)
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 19, 2014, 01:44:18 PM
I was looking at the Aimpoint H-1 but Amazon only has free shipping for the 4 MOA. Is that too much for my setup?

http://www.amazon.com/exec/obidos/ASIN/B0017DGLJI/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B0017DGLJI/?tag=2ahawaii-20)

Are you asking if the dot is too big?
Title: Re: Help Build an AR-15
Post by: sliver on March 19, 2014, 01:45:53 PM
I was looking at the Aimpoint H-1 but Amazon only has free shipping for the 4 MOA. Is that too much for my setup?

http://www.amazon.com/exec/obidos/ASIN/B0017DGLJI/?tag=2ahawaii-20 (http://www.amazon.com/exec/obidos/ASIN/B0017DGLJI/?tag=2ahawaii-20)

you might wanna take a look at the vortex spac.  its only 130 bucks (was this price on sale at palmetto state armor last week) and it comes with life time warranty.  no it is not as well built or bullet proof as an aimpoint but are you going to war in the sandbox and need that type of ruggedness?  its 2moa and looks just like the aimpoint (just a hint darker though the glass but I doubt you will be able to tell or care outside).  the only crappy part is the nightvision mode which if you hit it, it looks like the red dot died on you (its so dark that you cant see it normally) and its easy to hit the button for it cuz its right there and big.  it does hold zero, works well, and the parallax is like 1 inch when your under 15-20 yards.  how often are you shooting at that distance and need pin point accuracy?  I'm pretty sure you can still hit a human target if its only 1 inch off if your way off to the side when looking though the glass.  It's pretty much on target if your cheek weld is on.  I mean a red dot is not really meant for precision.  its to shoot multiple human head sized targets quickly.  If you need that type of accuracy, get a scope!

If you do want the best, I'd go with the aimpoint.  if your going for fun and what works and what is affordable, I'd go with the sparc.  I mean you could build a back up/trunk ar15 for the price of the aimpoint.  Just saying...  Also, note the warranty on the aimpoint... •Includes limited manufacturer's warranties of two years for professional or competitive use, and ten years for personal or recreational use.  basically its 2 years warranty and if it dies, your shit out of luck!  You said you didn't wanna care/baby your gun and you were gonna throw it around in the dirt/ground.  Well if your gonna actually use your rifle and have fun with it, I'd go with something with life time warranty.  that is just me though, your millage may vary...
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 19, 2014, 01:57:51 PM
i thought MOA was minute of angle.
Title: Re: Help Build an AR-15
Post by: sliver on March 19, 2014, 01:58:32 PM
i thought MOA was minute of angle.

it is
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 19, 2014, 02:02:12 PM
Ok confused now. Bota-CS1 asked if the dot is too big. Does the 4MOA have a bigger dot than the 2MOA? I was asking for my setup, is going 4MOA too high vs 2MOA?
Title: Re: Help Build an AR-15
Post by: macsak on March 19, 2014, 02:06:54 PM
Ok confused now. Bota-CS1 asked if the dot is too big. Does the 4MOA have a bigger dot than the 2MOA? I was asking for my setup, is going 4MOA too high vs 2MOA?

4 moa dot is bigger than a 2 moa dot
it depends on how far you are going to shoot and degree of accuracy you want
50 yards and in, not gonna make much difference
100 yards and out, it's gonna make a difference
Title: Re: Help Build an AR-15
Post by: macsak on March 19, 2014, 02:08:54 PM
4 moa dot is bigger than a 2 moa dot
it depends on how far you are going to shoot and degree of accuracy you want
50 yards and in, not gonna make much difference
100 yards and out, it's gonna make a difference

to be more clear, a 4 MOA dot will cover 4 MOA
for example, it will cover 4 inches (approximately) at 100 yards
whereas a 2 MOA dot will cover 2 inches at 100 yards
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 19, 2014, 02:11:52 PM
..., and the parallax is like 1 inch when your under 15-20 yards how often are you shooting at that distance and I'm pretty sure you can still hit a human target if its only 1 inch off if your way off to the side when looking though the glass.  It's pretty much on target if your cheek weld is on.  I mean a red dot is not really meant for precision.  its to shoot multiple human head sized targets quickly.  If you need that type of accuracy, get a scope!


Are you sure you're talking about the right red dot model?  Even Amazon says in it's description that the vortex is parallax free... ???


Vortex SPARC Red Dot Scope


by Vortex Optics


   122 customer reviews
   
 |   16 answered questions     
 
--------------------------------------------------------------------------------



Price: $199.00   

 

Note: Free shipping when purchased from Bob Wards. Offers with free Prime shipping available in more buying choices.


 In stock. 
Usually ships within 4 to 5 days.

Ships from and sold by Bob Wards.


•Fully multi-coated lenses
•One-piece tube
•High recoil caliber rating
•Adjustable dot intensity
•Parallax free
Title: Re: Help Build an AR-15
Post by: ren on March 19, 2014, 02:20:26 PM
Keep in mind that a smaller dot doesn't equate to "better accuracy" same thing with a front sight post.
If you have to struggle to focus on that dot or post, you probably need a fatter dot or post.
I switched from .052 front sight post to a standard GI post .070 and my scores improved with less eye strain. It is documented amongst a lot of aging shooters as well. If you are off call with shots in the corner, you probably are not focusing on the front sight or you can't focus on it before you press the trigger.
No optic is 100% parallax free at all distances.
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 19, 2014, 02:44:11 PM
Well this would be more for 100yrds and out. which one would you guys go with, 2 or 4MOA?
Title: Re: Help Build an AR-15
Post by: Hi state on March 19, 2014, 03:04:36 PM
Well this would be more for 100yrds and out. which one would you guys go with, 2 or 4MOA?
if your gonna be shooting 100yrds and out I would go with the 2 moa the dot will cover less of the target
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 19, 2014, 03:30:52 PM
I think I'm just going to stick with the Aimpoint 2MOA as it's about 2 ounces lighter. Every little bit helps. I just need help with the iron sight now.
Title: Re: Help Build an AR-15
Post by: Bota-CS1 on March 19, 2014, 04:09:44 PM
The Magpul Mbus Gen II's are pretty light as they come.   :shaka:
Title: Re: Help Build an AR-15
Post by: new guy on March 19, 2014, 05:59:04 PM
.
Title: Re: Help Build an AR-15
Post by: ren on March 19, 2014, 06:11:48 PM
Neither; if this is going to be a designated 90+ meter rifle, I would personally lose the thought of a red dot and go with a variable power scope.

 :-X  :popcorn:
Title: Re: Help Build an AR-15
Post by: new guy on March 19, 2014, 06:29:46 PM
.
Title: Re: Help Build an AR-15
Post by: edster48 on March 19, 2014, 08:47:53 PM
I do like those barrels, they start off as Shilen blanks.  they are chambered for .223 though.  careful about using 5.56 in them.

sub-moa guaranteed... 

Rainier makes them in 5.56 as well. The mountain, select or match series. I picked up a select for my build, seriously nice, plus flat rate shipping $7.95. got my barrel in 5 days. NiB BCG arrived in 3, also very nice.
Title: Re: Help Build an AR-15
Post by: Teichi on March 20, 2014, 07:23:24 AM
:-X  :popcorn:
Heavy sigh.
Typical gun forum advice (http://www.youtube.com/watch?v=ajfiE3iq78k#ws)
Title: Re: Help Build an AR-15
Post by: new guy on March 20, 2014, 08:25:07 AM
.
Title: Re: Help Build an AR-15
Post by: ren on March 20, 2014, 10:57:33 AM
I'm just like John Lennon watching the wheels go round and round.
I take advice from whomever I can. From people wearing all kinds of tabs, medals, and assignments to units. Some advice works and some don't. I had a SGM who was a long tabber and went to SOTIC tell us that before he took a shot he took a gulp (as in swallowing) of air. Worked for him, didnt work for me. Not sure if he was just messin with us as we were just LTs trying to run a range at the time.
I think RDS are underestimated at the kind of work they can be used in. I was humbly shown that a 4 MOA RDS can engage targets at 400 meters. Fundamentals rule over gadgets and perceived performance. I like shooting HP because the targets don't lie. I've pounded concrete many times in frustration until I found out what the problem was - and it was always a principle of fundamentals.
Don't underestimate what a plain AR can do.
On the other hand, the modern AR is akin to a Mr. Potato Head.
You can dress it up to reenact a wet dream of killing zombies or hunting tangoes.
Whatever you want to do to it - do it. This is 'Merica :thumbsup: The AR is an icon of freedom.
Title: Re: Help Build an AR-15
Post by: Teichi on March 20, 2014, 06:18:51 PM
Ren and I are not really long range shooters, we are service rifle shooters. 200 and 300 yards are considered short range and targets are given the NRA SR and SR-3 designations. 500 and 600 yards are considered mid range and targets are given the MR and MR-1 designations.  We rarely shoot beyond that due to range availability and access to accurate downrange feedback.

The big question is what do you want to do with the AR?

Shooting milk jugs at 25 yards is much different that shooting mongooses at 200 yards. Red dots are great for minute of man sized targets out to 400, but will blot out a rat at 100. Variable scopes are good for the majority of situations. Iron sights are classic and should be included on every build since batteries die and glass breaks.

Like Ren said, Mr. Potato Head.

If bling is your thing, go ahead. Rails, bipods, lasers, gangstergrips, redimags, flashlights, and ceracote in designer colors.

If good shooting is your thing, then use a decent lower, 18-20" barrel. 1/7-1/8 twist, good trigger, sturdy sights adjustable for windage and elevation, and at least a red dot and a variable power scope to be changed as needed.
Spend money on quality ammo and test for group size and bullet drop and wind resistance at different ranges.

Learn the techniques of the winners of actual competitions. Many of them write books and have videos. I stay away from most commercial tactical schools. Most of their expertise is separating you from your money. And I don't see many of them shooting on the national circuit.
Title: Re: Help Build an AR-15
Post by: new guy on March 20, 2014, 06:22:28 PM
.
Title: Re: Help Build an AR-15
Post by: BLKDRGN on March 20, 2014, 07:38:15 PM
I'm here to have fun and not preparing for war or competition. But if SHTF I figure I'll use my bullpups for close range 100yrds and below, AR for mid 100 to whatever is mid, lol, and my bolt action for long distance. IDK? No need drama as everyone is entitled to their opinion. All I care about is an AR-15 for my wife to play with but something light.