2aHawaii

General Topics => General Discussion => Topic started by: drck1000 on March 26, 2018, 10:24:29 AM

Title: AK47 Project
Post by: drck1000 on March 26, 2018, 10:24:29 AM
Finally getting around to an AK project that I had planned years ago. 

Base gun is a Hungarian FEG SA-85 that I picked up from a friend who got it in an estate sale.  Condition appears to be unfired.  I was looking for a decent, but inexpensive stamped AK to start a project with and this gun was offered at a good price. 

The same gun in this video:

https://youtu.be/yLOKKlPuydA

I had thought about keeping as-is as I've heard that this style of gun can be collectible, but the current going rate isn't that high, so I decided to go ahead with the mods. 

What I currently have on hand or ordered:

SLR Rifleworks 11.5" Keymod handguard with gas block picatinny rail
VLTOR AR15/M4 buttstock
Larue low mount for Aimpoint Micro

Will likely get some sort of AR style pistol grip and I'm thinking a B5 stock.

I would eventually like to have the muzzle threaded for a comp.  Comps I'm currently considering are the BattleComp (little pricey though) and the SLR Synergy Comp AK.  I might just try the gun as-is for a little while as well. 

I just ordered the handguard, so hopefully will have it in about a week or so.  That's the main component that I need to get this project really going. 

Open to suggestions for muzzle device, pistol grip and buttstock. 
Title: Re: AK47 Project
Post by: rklapp on March 26, 2018, 12:05:11 PM
Fun. I had Dexter thread and install a muzzle brake on my AK. He did a great job.
Title: Re: AK47 Project
Post by: TastesLikeMetal on March 26, 2018, 10:39:32 PM
Nice, looking forward to updates.
Title: Re: AK47 Project
Post by: rklapp on March 26, 2018, 10:49:26 PM
I'm curious if you will change the fire control group.

Also, sounds like barrel isn't already threaded with a pinned cover. Mine wasn't so had to be threaded.
Title: Re: AK47 Project
Post by: astroboy on March 27, 2018, 09:50:13 AM
Nice to see an ak upgrade. I am looking forward to your project updates. Thanks for posting.   :shaka:
Title: Re: AK47 Project
Post by: drck1000 on March 27, 2018, 07:28:36 PM
SLR rail shipped and should be here end of the week. I might have time to try the assembly this weekend, but prob not until I eat week sometime. Still have to get the stock and grip. Optic mount is somewhere in transit.

Spoke to John P today. He has a lot going on and declined the barrel threading work. Will try contacting Wayne.
Title: Re: AK47 Project
Post by: Drakiir84 on March 28, 2018, 08:28:10 AM
https://www.opticsplanet.com/primary-weapons-systems-mod-2-fsc-series-flash-suppressing-compensator.html
Title: Re: AK47 Project
Post by: drck1000 on March 28, 2018, 09:08:07 AM
https://www.opticsplanet.com/primary-weapons-systems-mod-2-fsc-series-flash-suppressing-compensator.html
Thanks!

So far I'm looking at:

SLR BCF and Comp AK ($85)
BattleComp ($200-220) - Likely not due to price
Arsenal OEM Comp ($25-30)

I'll add that PWS one.  I've shot the PWS on ARs and they seem awesome, but also one of the loudest I've shot. 
Title: Re: AK47 Project
Post by: Drakiir84 on March 28, 2018, 09:14:06 AM
Thanks!

So far I'm looking at:

SLR BCF and Comp AK ($85)
BattleComp ($200-220) - Likely not due to price
Arsenal OEM Comp ($25-30)

I'll add that PWS one.  I've shot the PWS on ARs and they seem awesome, but also one of the loudest I've shot.

The louder the better IMO.  If you're gonna use a comp you might as well be as obnoxious as possible lol.
Title: Re: AK47 Project
Post by: drck1000 on March 28, 2018, 09:33:38 AM
The louder the better IMO.  If you're gonna use a comp you might as well be as obnoxious as possible lol.
You could apply that to you instead of comps. . .  ;D
Title: Re: AK47 Project
Post by: Drakiir84 on March 28, 2018, 09:38:35 AM
You could apply that to you instead of comps. . .  ;D

#lifegoals
Title: Re: AK47 Project
Post by: stangzilla on March 28, 2018, 12:48:42 PM
nice!
keep us updated on the progress   :shaka:
Title: Re: AK47 Project
Post by: drck1000 on March 29, 2018, 07:46:32 AM
I'm curious if you will change the fire control group.

Also, sounds like barrel isn't already threaded with a pinned cover. Mine wasn't so had to be threaded.
I wasn't thinking about changing the FCG.  The trigger on this gun is a little heavier than my Arsenal.  I think I'm gonna shoot it a bunch first and see how things work in.  I took it apart last night.  The action was sluggish so Iubed the bolt thing and bolt carrier and the action was much smoother after that.  The old grease seemed to be gumming things up.  I suspected the guy who owned it never shot it.  The piston was PRISTINE!  Never seen one so bright and shiny. 

Back to the FCG, since I am modding a lot of this gun, I'd be open to it.  This will be somewhat of a beater gun as well as I want to do more training with the AK. 
Title: Re: AK47 Project
Post by: drck1000 on March 29, 2018, 07:51:17 AM
Delivery on the rail delayed, likely won't be doing it this weekend.  No idea where the optic mount is after UPS "transferred" to USPS. . .  >:(

Been looking at other gear needed for the AK.  I have mags and a sling that I think will work with the stock sling loop and a buttstock with a QD swivel.  Been looking at chest rigs as well.  With ARs, I do pouches on my belt, but don't think the AK mags work well with the pouches that I do have. 

For chest rigs, been looking at:

Beez Combat Systems
Strike Hard
US Grunt Gear

Leaning toward USGG. They are pricey, but they also have a 20% off sale through end of April.  I have a bunch of belts and pouches from them and they make great stuff. 
Title: Re: AK47 Project
Post by: changemyoil66 on March 29, 2018, 09:54:10 AM
Go old school, VC style.
Title: Re: AK47 Project
Post by: shdws on March 29, 2018, 10:12:59 AM
Delivery on the rail delayed, likely won't be doing it this weekend.  No idea where the optic mount is after UPS "transferred" to USPS. . .  >:(
Hope thats not UPS SurePost, because you might be waiting a few weeks if the USPS decides to throw that on a boat from Cali.  UPS trucks it across the country, then hands it to USPS for final delivery.  For Hawaii, that means they might throw it in a boat like the Parcel Pool (do they still call it that?) service.

I've had an item take literally over a month.  Free shipping sometimes just aint worth the hassle.
Title: Re: AK47 Project
Post by: drck1000 on March 29, 2018, 10:23:31 AM
Hope thats not UPS SurePost, because you might be waiting a few weeks if the USPS decides to throw that on a boat from Cali.  UPS trucks it across the country, then hands it to USPS for final delivery.  For Hawaii, that means they might throw it in a boat like the Parcel Pool (do they still call it that?) service.

I've had an item take literally over a month.  Free shipping sometimes just aint worth the hassle.
Unfortunately I think that's what it is.  I have returned Amazon items and the USPS person mentioned it would take a while based on the shipping label. She did mention the item would be shipped via boat from Hawaii to the mainland.  UPS' tracking lists the handoff point in CA, so. . . I elected the flat rate shipping option, and wasn't free either. 

Not in any real rush.  Just figured the handguard was the main item to get the gun in "shooting order".  Never figured the optic mount would take 3-4 weeks.   :wacko:
Title: Re: AK47 Project
Post by: shdws on March 29, 2018, 03:19:58 PM
Unfortunately I think that's what it is.  I have returned Amazon items and the USPS person mentioned it would take a while based on the shipping label. She did mention the item would be shipped via boat from Hawaii to the mainland.  UPS' tracking lists the handoff point in CA, so. . . I elected the flat rate shipping option, and wasn't free either. 

Not in any real rush.  Just figured the handguard was the main item to get the gun in "shooting order".  Never figured the optic mount would take 3-4 weeks.   :wacko:
Good luck, I've had both short-ish and very long wait times with items shipped like that.  Sometimes it goes on the boat, sometimes it doesnt.  If the tracking doesnt change for half a week or so, you'll know shes sailing on the ocean.  Either way, it takes longer than either UPS or USPS individually so boo to whoever shipped that to you like that and charged you for it.  On the mainland surepost isnt that slow, just like 1 day longer than ground.  Not for us.
Title: Re: AK47 Project
Post by: drck1000 on March 30, 2018, 09:31:05 AM
Good luck, I've had both short-ish and very long wait times with items shipped like that.  Sometimes it goes on the boat, sometimes it doesnt. If the tracking doesnt change for half a week or so, you'll know shes sailing on the ocean.  Either way, it takes longer than either UPS or USPS individually so boo to whoever shipped that to you like that and charged you for it.  On the mainland surepost isnt that slow, just like 1 day longer than ground.  Not for us.
It's been almost 10 days. . .  :(

Vendor is Larue.  I've ordered many times from them in the past and shipping was always fast. 
Title: Re: AK47 Project
Post by: drck1000 on April 03, 2018, 08:27:52 AM
Everything on order came in over the weekend.  Optic mount and SLR rail.  Have a guy lined up to help with threading of the barrel, so hopefully I'll have the gun up and shooting before too long. 
Title: Re: AK47 Project
Post by: TooFewPews on April 03, 2018, 08:32:47 AM
Everything on order came in over the weekend.  Optic mount and SLR rail.  Have a guy lined up to help with threading of the barrel, so hopefully I'll have the gun up and shooting before too long.

if you don't mind me asking, what is the cost of the threading service?
Title: Re: AK47 Project
Post by: drck1000 on April 03, 2018, 08:47:38 AM
if you don't mind me asking, what is the cost of the threading service?
Don't know yet.  I am planning on meeting up with the guy later this week to have him check out the gun and discuss options.  I'll let you know.  If I forget, feel free to remind me. 
Title: Re: AK47 Project
Post by: changemyoil66 on April 03, 2018, 10:44:38 AM
shot an AK on Saturday.  Haven't show one in 7 years.  I was surprised how little it recoiled (less than my AR).  AK just moved up a few notches on my "to buy list".
Title: Re: AK47 Project
Post by: drck1000 on April 03, 2018, 10:56:56 AM
shot an AK on Saturday.  Haven't show one in 7 years.  I was surprised how little it recoiled (less than my AR).  AK just moved up a few notches on my "to buy list".
Did it have a comp or brake on it? 
Title: Re: AK47 Project
Post by: changemyoil66 on April 03, 2018, 11:23:12 AM
Did it have a comp or brake on it?

Comp, but my AR has a Gamma VG6 on it also.
Title: Re: AK47 Project
Post by: drck1000 on April 03, 2018, 11:53:13 AM
Comp, but my AR has a Gamma VG6 on it also.
I see.  It's pretty subjective.  All my ARs except for one has an A2 flash hider.  One has a BattleComp.  My Arsenal AK has the cheapo comp that it came with.  To me, the AK muzzle rises more than with the ARs, but some of that could be because the AK doesn't really work with the thumb over grip.  As for rearward recoil, I would say that the AK is a little more for me, but it's not like either really recoils that hard.

For this project gun, I'm thinking of going with a comp that isn't that is more for reducing muzzle rise.  To me, that's where I notice the AK more than ARs. 
Title: Re: AK47 Project
Post by: groveler on April 03, 2018, 02:43:06 PM
shot an AK on Saturday.  Haven't show one in 7 years.  I was surprised how little it recoiled (less than my AR).  AK just moved up a few notches on my "to buy list".
I don't own an AR platform.
I'm an AK guy for that sort of
situation, being 100 meters or less.
plus it is more likely people can
smuggle in ammo when Hawaii outlaws
your guns and America outlaws the ammo..
I never violate any constitutional federal,
state or local laws.

Title: Re: AK47 Project
Post by: shdws on April 03, 2018, 02:44:25 PM
I never violate any constitutional federal,
state or local laws.
I see what you did there  :thumbsup:
Title: Re: AK47 Project
Post by: drck1000 on April 04, 2018, 08:03:09 AM
I don't own an AR platform.
I'm an AK guy for that sort of
situation, being 100 meters or less.
plus it is more likely people can
smuggle in ammo when Hawaii outlaws
your guns and America outlaws the ammo..
I never violate any constitutional federal,
state or local laws.
You don't own A R
You like A K four seven
What kine do you have?


Incidentally, it's not easy writing posts in Haiku form.   ;D
Title: Re: AK47 Project
Post by: groveler on April 04, 2018, 05:19:41 PM
You don't own A R
You like A K four seven
What kine do you have?


Incidentally, it's not easy writing posts in Haiku form.   ;D
As the Puna guy and the Inspector have told me
Hawaii cops read our stuff.
My favorite rifle is the SKS.
My second favorite is the M14.
or as we can only get the M1A.
I like 7mm Mag for long distances.
All my guns are on the mainland.
I do not violate any constitutional
Federal, state, or local laws,

Title: Re: AK47 Project
Post by: drck1000 on April 05, 2018, 12:25:20 PM
As the Puna guy and the Inspector have told me
Hawaii cops read our stuff.
My favorite rifle is the SKS.
My second favorite is the M14.
or as we can only get the M1A.
I like 7mm Mag for long distances.
All my guns are on the mainland.
I do not violate any constitutional
Federal, state, or local laws,
Cool.  I've always wanted an SKS, but not willing to pay current going rate prices for them.  I needed to buy one like 10 years ago, maybe a little more. 

The M1A is also another "one day" gun.  Just too expensive to me to feed a semi-auto .308 gun right now. 
Title: Re: AK47 Project
Post by: changemyoil66 on April 05, 2018, 12:35:40 PM
Cool.  I've always wanted an SKS, but not willing to pay current going rate prices for them.  I needed to buy one like 10 years ago, maybe a little more. 

The M1A is also another "one day" gun.  Just too expensive to me to feed a semi-auto .308 gun right now.

I shot a SKS.  They're super fun to shoot and fun to load (something different).  Recoil was very good also.  Only down side is the hand protection for the hot barrel sucks.  Burnt my hand a little.  Just takes some time to get used to.  But now I know how to operate one if need be (the safety is by the trigger that's a flipping latch).
Title: Re: AK47 Project
Post by: drck1000 on April 24, 2018, 01:39:15 PM
if you don't mind me asking, what is the cost of the threading service?
Was able to chat with Craig at Red Letter today.  Estimate on the threading is $150 if the end of the barrel is plain.  Apparently there are some versions of AKs where there front sight sort of sleeves the end of the muzzle.  I don't think mine is that way, but if it is, it will be more.  I wasn't able to take my AK with when I chatted with him, so will have to wait until I have some time to actually take the AK by for him to evaluate. 

Other than that, I have pretty much everything.  Added the BCM SOPMOD stock and a Magpul AK grip.  Just need to set aside some time to actually take the AK to get threaded.  Hopefully in the next 3 weeks or so. 
Title: Re: AK47 Project
Post by: Drakiir84 on April 25, 2018, 09:11:51 AM
Was able to chat with Craig at Red Letter today.  Estimate on the threading is $150 if the end of the barrel is plain.  Apparently there are some versions of AKs where there front sight sort of sleeves the end of the muzzle.  I don't think mine is that way, but if it is, it will be more.  I wasn't able to take my AK with when I chatted with him, so will have to wait until I have some time to actually take the AK by for him to evaluate. 

Other than that, I have pretty much everything.  Added the BCM SOPMOD stock and a Magpul AK grip.  Just need to set aside some time to actually take the AK to get threaded.  Hopefully in the next 3 weeks or so.

We ever gonna shoot this thing?  The weekend is CAAALLLLIIIING!
Title: Re: AK47 Project
Post by: drck1000 on April 25, 2018, 10:01:45 AM
We ever gonna shoot this thing?  The weekend is CAAALLLLIIIING!
Soon, but won't be this weekend.  Well, I guess could shoot it, just in the stock form.  What's the fun in that?   ;D
Title: Re: AK47 Project
Post by: changemyoil66 on April 25, 2018, 10:04:41 AM
Can shoot, just to make sure everything functions correctly.
Title: Re: AK47 Project
Post by: drck1000 on April 25, 2018, 10:13:22 AM
Can shoot, just to make sure everything functions correctly.
Function correctly?  I did buy it without test firing.  From the looks of the gun, I don't think the original owner did either.  So maybe it could use a function test shoot.  Hey Drakiir, make sure you have good eye protection when you go to fun shoot!   ;D Maybe some kevlar gloves too. . .
Title: Re: AK47 Project
Post by: changemyoil66 on April 25, 2018, 10:15:49 AM
Function correctly?  I did buy it without test firing.  From the looks of the gun, I don't think the original owner did either.  So maybe it could use a function test shoot.  Hey Drakiir, make sure you have good eye protection when you go to fun shoot!   ;D Maybe some kevlar gloves too. . .

I know guys who bought a gun and didn't shoot it till a year later.  I guess cause I'm still new to the culture, I shoot it the coming weekend.  Got the bug still.
Title: Re: AK47 Project
Post by: Drakiir84 on April 25, 2018, 10:21:37 AM
Function correctly?  I did buy it without test firing.  From the looks of the gun, I don't think the original owner did either.  So maybe it could use a function test shoot.  Hey Drakiir, make sure you have good eye protection when you go to fun shoot!   ;D Maybe some kevlar gloves too. . .

Always do bro lolol
Title: Re: AK47 Project
Post by: drck1000 on April 25, 2018, 10:26:10 AM
I know guys who bought a gun and didn't shoot it till a year later.  I guess cause I'm still new to the culture, I shoot it the coming weekend.  Got the bug still.
I normally shoot new guns before too long.  I got this AK as part of an estate sale from a friend.  I was looking for a beater/cheaper AK to MOD.  But this one was pretty much brand new and the wood stock made it potential for collector value.  I debated for a while just keeping it as-is and hold for value.  I have another AK that's a shooter, so it's not like I was "needing" to shoot this one.  But then I finally gave in and started buying the parts.

I have somewhat gotten the bug back since I've been shooting more lately.  Been both shooting more as well as buying gun stuff. 

Always do bro lolol
Gloves. . . don't forget the protective gloves.  Don't want your daughter growing up with a 8 or 9 fingered father. . .  ;D
Title: Re: AK47 Project
Post by: drck1000 on June 13, 2018, 01:50:02 PM
Update

The AK project is just about complete.  Main things done.  Not sure if I will be able to shoot it this weekend though. . . :(

Hungarian FEG SA-85 (originally with wood thumbhole stock) was the base gun
SLR Rifleworks 11.5" Keymod handguard with gas block picatinny rail
VLTOR AR15/M4 buttstock
VG6 Epsilon AK
ALG Defense AK-47 AKT Enhanced Trigger with Lightening Bow
Krebs Safety
Larue low mount for Aimpoint Micro
Correction - BCM Mod 0 SOPMOD

Just have to mount the T-1 on the lower Larue mount and then mount on the gun.

Not sure which sling I'll use yet, but I have a few choices since there are QD points on the rail as well as might be able to use the original sling loop.

Will post pics later  :thumbsup:

Super excited about shooting this gun.   ;D

Title: Re: AK47 Project
Post by: changemyoil66 on June 13, 2018, 01:53:32 PM
pics?

And what's the weight on the trigger?
Title: Re: AK47 Project
Post by: drck1000 on June 13, 2018, 02:01:55 PM
pics?

And what's the weight on the trigger?
Will get to pics, hopefully later tonight. 

Not sure.  Don't have a trigger pull/scale.  I'll see if a buddy has one.  My first impression was that it was decent and the reset was pretty short.
Title: Re: AK47 Project
Post by: changemyoil66 on June 13, 2018, 02:27:53 PM
Will get to pics, hopefully later tonight. 

Not sure.  Don't have a trigger pull/scale.  I'll see if a buddy has one.  My first impression was that it was decent and the reset was pretty short.

Less than factory pull?  No need ask your buddy.  What do you guesstimate it to be?
Title: Re: AK47 Project
Post by: drck1000 on June 13, 2018, 11:43:34 PM
Didn’t have time to set the T-1 on the mount tonight. So here’s some plain pics.
Title: Re: AK47 Project
Post by: macsak on June 14, 2018, 04:51:08 AM
Didn’t have time to set the T-1 on the mount tonight. So here’s some plain pics.

sweet!
good thing it's not one of those full semi-automatic AR15s
those are death machines
Title: Re: AK47 Project
Post by: changemyoil66 on June 14, 2018, 08:44:48 AM
Sweet looking rifle.  I think when I'm ready to buy one, I'm going to keep it OEM, irons and all.  Just a personal preference.
Title: Re: AK47 Project
Post by: drck1000 on June 14, 2018, 09:07:12 AM
Sweet looking rifle.  I think when I'm ready to buy one, I'm going to keep it OEM, irons and all.  Just a personal preference.
I already have an Arsenal milled AK that is as-is from the box and I don't intend to mod that one.  I got this AK specifically with the intention of being a project gun.  I posted this project on another gun forum and one "old school" guy expressed his disdain for modding AKs.  To each their own.  To me, it was a fun idea to mod.  And I value anything that will help improve performance of a firearm.  And, you know what you know, so  :thumbsup:

And to answer your question about the ALG trigger, I would say it's maybe 3-4 lbs.  It's pretty crisp.  From what I've read and been told, these need some time to work in.  The guy that did the install for me said he had a little trouble and had do some work to "smooth things out". 
Title: Re: AK47 Project
Post by: Surf on June 14, 2018, 06:09:21 PM
You will find diehards everywhere and it isn't just with guns.  I like the modifications for my uses also and even as an "AK guy" I prefer the mods over stock for practical purposes.  I also like the ALG trigger and one thing I have not done.
Title: Re: AK47 Project
Post by: rklapp on June 14, 2018, 10:43:32 PM
The NK have great mods.

(http://www.thefirearmblog.com/blog/wp-content/uploads/2017/04/mvghWHO.jpg)

Others maybe not so much...

(http://www.theakforum.net/forums/attachments/243002d1528405410-what-modern-russian-ak-variant-russian_unknown.png)

(http://i0.kym-cdn.com/photos/images/newsfeed/001/000/426/f42.jpg)

(https://i.pinimg.com/736x/c7/a1/2f/c7a12f350550608f8919786ef74d56b3--religion-accessories.jpg)

(http://oi61.tinypic.com/oa5hrr.jpg)
Title: Re: AK47 Project
Post by: stangzilla on June 15, 2018, 07:18:12 AM
Didn’t have time to set the T-1 on the mount tonight. So here’s some plain pics.

looks great!   
project guns are great fun.  :shaka:
Title: Re: AK47 Project
Post by: drck1000 on June 15, 2018, 07:18:48 AM
Got the T-1 on the Larue mount and mounted on the rail. Like the height. Not quite able to align the irons through the red dot, but close. Will have to try see how it goes when shooting.

I had the VLTOR light mount lying around and tried it with a G2x, but the rail section is one row too short for that mount. Might try an Arisaka or Thorntail mount or maybe a Inforce or Streamlight WML.

Will also have to play with the stock position. I initially had it as one out from min and my suppeprt hand ends up but the rail section. That’s ok, but not sure how it will work with a light. I also have to see how the grip works as my fingers and thumb touch the gas block section of the rail if I’m not careful. Might try to add some rail panels and see if I can keep that from happening.

I was thinking I would use one of my BFH slings for it and add some 550 cord to attach to the front sling hook, but my sling has sewn in QD swivel. I could try another sling I have that has an HK hook on the front, but don’t think the sling hook extends far enough to be able to hook into it.

Overall, I’m pretty happy with how it came together. Still have to shoot it and see, but liking it so far.
Title: Re: AK47 Project
Post by: drck1000 on June 15, 2018, 07:23:57 AM
Was doing more dry fire with AK and noticing the trigger. While it is still nicer than the stock trigger and even the stock trigger for my Arsenal, it’s not quite crisp. It has a slight creep before the break, but also not quite a wall before the break. Will see if it smooths out through shooting. Not bad, but just not quite as crisp as my initial impression.

Was comparing to some of a my ARs again last night and the pull weight seems lighter than those triggers, which are all USGI triggers.
Title: Re: AK47 Project
Post by: rklapp on June 15, 2018, 08:59:27 AM
I've been thinking of changing my stock trigger. I polished the contacts so it's now at 4.5# but still feels clunky. The AK is a mechanical firearm compared to the gas driven AR so I'm skeptical about the advantages. The AK is what it is so not sure if there's a point to upgrading the trigger.

I believe you have the following trigger. "The AKT features a smoother and shorter trigger pull than the stock trigger, and is ideal for combat and home defense use."
https://www.brownells.com/rifle-parts/triggers-parts/triggers/ak-47-akt-enhanced-with-lightning-bow-trigger-prod80204.aspx

I've been thinking of the ALG which is $90 instead of $60. "The Enhanced model has a pull that is even lighter and has a much crisper break than the ALG AKT Trigger which is ideal for precision and target shooting."
https://www.brownells.com/rifle-parts/triggers-parts/triggers/akt-ul-ultimate-with-lightning-bow-trigger-sku100017371-80205-164052.aspx


Title: Re: AK47 Project
Post by: drck1000 on June 15, 2018, 09:09:57 AM
1) I've been thinking of changing my stock trigger. I polished the contacts so it's now at 4.5# but still feels clunky. The AK is a mechanical firearm compared to the gas driven AR so I'm skeptical about the advantages. The AK is what it is so not sure if there's a point to upgrading the trigger.

2) I believe you have the following trigger. "The AKT features a smoother and shorter trigger pull than the stock trigger, and is ideal for combat and home defense use."
https://www.brownells.com/rifle-parts/triggers-parts/triggers/ak-47-akt-enhanced-with-lightning-bow-trigger-prod80204.aspx

3) I've been thinking of the ALG which is $90 instead of $60. "The Enhanced model has a pull that is even lighter and has a much crisper break than the ALG AKT Trigger which is ideal for precision and target shooting."
https://www.brownells.com/rifle-parts/triggers-parts/triggers/akt-ul-ultimate-with-lightning-bow-trigger-sku100017371-80205-164052.aspx
1) AK mechanical firearm vs gas driven AR? Huh? In any case, I don’t see how any of that relates to trigger upgrades.

2) Yes, that’s what I got. As to point in upgrading the trigger. Because I can and it was something I wanted to try. And depends on your intended use.

3) See #2. My AK isn’t intended for a precision nor a target rifle. None of my ARs are either. That trigger might be a good option for you given your shooting interests that you’ve shared here. While an AK is certainly accurate enough for me and what I want, I never thought of an AK for a precision gun. I mean I’d challenge myself to shoot good groups as I can if I was testing for accuracy. Since this is a new gun, I’ll probably test to a certain extent. But I usually get a good enough feel for that in the process of zeroing the optic.
Title: Re: AK47 Project
Post by: changemyoil66 on June 15, 2018, 01:52:29 PM
I'm no AK owner/expert, but I think by mechanical he means its a work horse.  May not look the nicest or run the smoothest, but it will always run and get the job done.

So don't expect to have a super smooth crisp 2.5lbs trigger.  Is it possible, yes, but not designed for it.  Hope this makes sense.
Title: Re: AK47 Project
Post by: rklapp on June 15, 2018, 05:10:01 PM
I'm no AK owner/expert, but I think by mechanical he means its a work horse.  May not look the nicest or run the smoothest, but it will always run and get the job done.

So don't expect to have a super smooth crisp 2.5lbs trigger.  Is it possible, yes, but not designed for it.  Hope this makes sense.
Sorry d1k, this was the point I was trying to make as c66 said. Wasn't trying to be critical, just relating what I've been contemplating about my own AK.
Title: Re: AK47 Project
Post by: drck1000 on June 15, 2018, 07:07:47 PM
Sorry d1k, this was the point I was trying to make as c66 said. Wasn't trying to be critical, just relating what I've been contemplating about my own AK.
Didn’t think you were being critical. Just didn’t get what you were getting at. I was also just saying that you seem to be interested in precision shooting. And I was just relaying that my AKs aren’t. I was ok with the stock trigger, but heard good things about the ALG AK trigger, so wanted to give it a try.
Title: Re: AK47 Project
Post by: TastesLikeMetal on June 17, 2018, 09:03:39 PM
So even though the Barrel wasn't threaded it still had the detent for the Muzzle Brake or are you using washers?  I'm killing my old eyes trying to look at your pictures :P
Title: Re: AK47 Project
Post by: drck1000 on June 17, 2018, 09:34:26 PM
So even though the Barrel wasn't threaded it still had the detent for the Muzzle Brake or are you using washers?  I'm killing my old eyes trying to look at your pictures :P
Washer that came with the comp. No detent.

Hope it’s easier to see on this pic.

Title: Re: AK47 Project
Post by: TastesLikeMetal on June 17, 2018, 10:04:49 PM
Nice, thanks.  Only reason I ask is the wrench flats are nice and vertical which I've found hard to do.
Title: Re: AK47 Project
Post by: drck1000 on June 18, 2018, 11:53:01 AM
Nice, thanks.  Only reason I ask is the wrench flats are nice and vertical which I've found hard to do.
Ahh.  Gotcha.  I was wondering about that aspect of adding a muzzle device on this gun.  Hopefully I will be able to shoot it in the next week or so. 
Title: Re: AK47 Project
Post by: rpoL98 on June 20, 2018, 03:47:21 PM
your project, well done by the way, strikes me as an AK that is really starting to look like an AR, what with the rail, VG6 brake, picatinny all over, Aimpoint, faux buffer tube to mount M4-compatible butt stock.  I guess this is the product of technology transfer, cross-pollination, and the benefit of the Reagan-Gorbachev love fest, huh?

at the same time, we also have the technology transfer going the other way, now with piston AR's chambered in 7.62x39, some even take AK mags, others the AR-type CPD/ASC's, along with half-assed AR side-folders:  they fold, but not semi-auto shootable when folded, just going for The Look and Tacticool style points.  All thanks to cheap steel-case 7.62x39 arriving on our shores as the motivator.

just a trend observation, nothing more, nothing less.

Like I said, nice looking project.  Does it still eject brass (or steel) right-and-forward 30 feet into the next time-zone?  which, of course, is in the AK DNA.
Title: Re: AK47 Project
Post by: drck1000 on June 20, 2018, 04:04:06 PM
your project, well done by the way, strikes me as an AK that is really starting to look like an AR, what with the rail, VG6 brake, picatinny all over, Aimpoint, M4-compatible butt stock.  I guess this is the product of technology transfer, cross-pollination, and the benefit of the Reagan-Gorbachev love fest, huh?

at the same time, we also have the technology transfer going the other way, now with piston AR's chambered in 7.62x39, some even take AK mags, others the AR-type CPD/ASC's, along with half-assed AR side-folders:  they fold, but not semi-auto shootable when folded, just going for The Look and Tacticool style points.  All thanks to cheap steel-case 7.62x39 arriving on our shores as the motivator.

just a trend observation, nothing more, nothing less.

Like I said, nice looking project.  Does it still eject brass (or steel) right-and-forward 30 feet into the next time-zone?  which, of course, is in the AK DNA.
Thanks! Yeah, it does have AR DNA in there. The goal wasn’t really that. Just sort of ended up that way. I guess being that I’ve shot ARs quite a bit, I guess it was natural.

The main mod that I wanted was a red dot. With my Arsenal, I tried the optic rail that attaches to the side of the receiver. The height of the optic with the sloping AK stock meant for a “chin weld”. I looked at other optic options, but then settled on the SLR rail.

If this gun came with a more standard stock, I might have stayed with it. I did want an option to change LOP and ended up with the VLTOR. I considered the Magpul and others as well.

The brake wasn’t initially on my list, but decided to “try something”. Same with the trigger. I was close to staying with the original muzzle (no device), but guess I also wanted to try the VG6.

The Krebs was after noticing others manipulating the safety in a cabine class. Or more to the point, difficulty in operating the standard AK safety.

The availability and cost of 7.62x39 ammo was a definite motivator in doing an AK project and desire to get more time shooting AKs. On a side note, I finally found Tula .223 cheap so test with my beater AR. 

I’m planning on shooting it this Sun. So will see the ejection. Once I get this gun zeroed, I’ll likely shoot the Arsenal more as well. That one is still as-is from the box.

Overall, this project got my interest in AKs going again.
Title: Re: AK47 Project
Post by: TastesLikeMetal on June 20, 2018, 08:32:17 PM
your project, well done by the way, strikes me as an AK that is really starting to look like an AR, what with the rail, VG6 brake, picatinny all over, Aimpoint, faux buffer tube to mount M4-compatible butt stock.  I guess this is the product of technology transfer, cross-pollination, and the benefit of the Reagan-Gorbachev love fest, huh?

at the same time, we also have the technology transfer going the other way, now with piston AR's chambered in 7.62x39, some even take AK mags, others the AR-type CPD/ASC's, along with half-assed AR side-folders:  they fold, but not semi-auto shootable when folded, just going for The Look and Tacticool style points.  All thanks to cheap steel-case 7.62x39 arriving on our shores as the motivator.

just a trend observation, nothing more, nothing less.

Like I said, nice looking project.  Does it still eject brass (or steel) right-and-forward 30 feet into the next time-zone?  which, of course, is in the AK DNA.
I get what your saying but I like that he added functionality/adjustablility to his AK without adding too much, or maybe even lightening his AK.  Now some of those Zenitco 15lb Spetsnaz specials look awesome but I'd hate to carry for any extended period of time.

(https://www.thefirearmblog.com/blog/wp-content/uploads/2015/08/002-3-convert-660x440.jpg)
Title: Re: AK47 Project
Post by: drck1000 on June 20, 2018, 09:22:44 PM
Yeah, the mods for this gun were from a functional and performance perspective. Each part or mod was purpose driven. Have some rail panels coming in and might still add a light. But will likely shoot it for a while and see how things shake out.
Title: Re: AK47 Project
Post by: drck1000 on June 24, 2018, 08:21:20 PM
Shot about 80 rounds today. Verified stock irons and then zeroed red dot. Would’ve zeroed quicker except for brain farts and moving POI opposite direction. :facepalm:

Zeroed red dot at 50 and had some of the black powder guys shot steel at 100. Was easy for them to get consistent hits on a 12” diameter plate at 100, so I was happy and confirmation enough for me. The brake worked well and was able to keep the dot on the 12” plate at 100 after each shot.

The gun handled better than i thought. It wasn’t as front heavy as I thought it would be. Think that helped muzzle rise. Was flatter shooting than I thought. Not quite as flat as my main AR, but not bad.

Here’s a target at 50 to confirm zero.

Title: Re: AK47 Project
Post by: drck1000 on July 15, 2018, 01:13:18 PM
Shot the AK project in some drills at a carbine class yesterday.  I definitely need to spend more time with this gun. 

One thing that jumped out in shooting the AK in the class was how hot it gets!  I shot maybe 70-80 rounds over maybe 2-3 minutes and the hand guard was so hot that it was painful to hold, even with gloves.  My support hand ends up right at the end of the gas tube.  So that area got super hot as well as I could see where the gasses leaked in that area and left exhaust marks on the hand guard.  I had carbon grip panels on the bottom of the hand guard and even those didn't really help.  I went back to my AR after that drill.  If I had to continue shooting the AK, I probably would have had to put my support hand on the magazine. 

Not sure what I will try next.  I was thinking of a hand stop or something that would help provide heat sink/break for the hand guard.  Shooting my AR in similar drills got the gun pretty hot, but with the grip panels and my gloves, the heat didn't bother me. 

Performance wise, I think the AK shot well.  It has more recoil than my AR, so shot splits would probably be slower, but I didn't try them side-by-side. 

Mag changes was a bit of a struggle.  I think the mag release needs to be broken in some.  Still being pretty green with AKs certainly didn't help. 

Not sure what happened, but after the end of the second mag, I noticed lube coming out of the receiver.  I believe I don't put grease on the bolt rails and maybe a little on the receiver rails, but I didn't think that would get into the main action of the gun.  I'll have to see what it looks like when I clean it later today, but the lube went all over the place and made is such that I could barely see through the red dot. 

Overall, I was a little disappointed, but will certainly give the gun more time.
Title: Re: AK47 Project
Post by: rklapp on July 15, 2018, 07:46:21 PM
IV's original meltdown videos is the reason why I wanted to get an AK-VEPR. He revisited the old videos. Their t-shirts are awesome.

https://www.youtube.com/watch?v=g9MTLAAGAmw
Title: Re: AK47 Project
Post by: changemyoil66 on July 15, 2018, 09:31:04 PM
Story i heard. Everyone who shows up to a class with an AK, shows up with an AR the next one.

Sent from my SM-G920V using Tapatalk

Title: Re: AK47 Project
Post by: drck1000 on July 16, 2018, 07:24:46 AM
I've seen many folks go through carbine classes with AKs and continue with AKs.  Everyone has their preferences.  I've even seen folks with bring SCARs to carbine classes.  I have yet to see someone with a bullpup, but I wouldn't think anything of it. 

While I certainly prefer ARs over AKs, I definitely see the positives of AKs.  For the carbine course, I wanted to shoot it more, but when I was being hampered by the heat of the handguard and not able to see well through the red dot and distracted from the course of fire, I decided to stop there.  I'll have other chances to shoot the AK, but wanted to make most of the carbine class. 

I expected a learning curve and that's what I found that I was up against.  Definitely going to give it more time and find ways to either remedy or get around the issues that I found out this past weekend.  All part of the process. 
Title: Re: AK47 Project
Post by: drck1000 on July 20, 2018, 11:13:47 AM
Now thinking about changing out the SLR rail for another SLR rail that will allow adding grip panels for better heat shielding.  This current rail has a cut out for the sling loop at the gas block.  That's in the area where my support hand goes, but the sling loop gets hot too and also prevents putting a rail panel in that area.  So thinking of cutting off the sling loop and change rail to one that doesn't have the cut out and can add a rail cover over that area.  Something that is a heat shield and also increases the diameter slightly to keep my fingers away from the railed gas block.  Would be able to use the same railed gas block, so that's one good thing. 

I've also considered adding a vertical grip.  I have shorty vertical grips on my ARs and use them primarily as a handstop.  But I was also thinking that I could use the vertical grip in a "beer can" grip when the rail gets too hot.  While not my preferred method, I think better than going with the magazine grip for the support hand. 

Damn, I'm gonna need to get more AK ammo soon.   ;D
Title: Re: AK47 Project
Post by: changemyoil66 on July 20, 2018, 11:59:04 AM
I've seen many folks go through carbine classes with AKs and continue with AKs.  Everyone has their preferences.  I've even seen folks with bring SCARs to carbine classes.  I have yet to see someone with a bullpup, but I wouldn't think anything of it. 

While I certainly prefer ARs over AKs, I definitely see the positives of AKs.  For the carbine course, I wanted to shoot it more, but when I was being hampered by the heat of the handguard and not able to see well through the red dot and distracted from the course of fire, I decided to stop there.  I'll have other chances to shoot the AK, but wanted to make most of the carbine class. 

I expected a learning curve and that's what I found that I was up against.  Definitely going to give it more time and find ways to either remedy or get around the issues that I found out this past weekend.  All part of the process.

Would an AR with a standard heat shield have been the same?  Majority free float, even myself so I haven't shot lots of rounds with the stock handguard.
Title: Re: AK47 Project
Post by: drck1000 on July 20, 2018, 12:17:36 PM
Would an AR with a standard heat shield have been the same?  Majority free float, even myself so I haven't shot lots of rounds with the stock handguard.
Are you referring to these?

(https://cattailrunllc.com/assets/images/anderson/anderson_a2_handguard_a.jpg)

None of my ARs have those, but I've shot some with them hot enough to get uncomfortable, but not like this AK. 

My AK has a railed gas block so the block itself gets hot.  With the venting and the metal that forms the sling loop being directly in contact with the barrel, they all get hot.  In the current setup, my hand can touch the sling loop, which is close to being able to touch the FSP on an AR.

As for heat shield for AK furniture.  My Arsenal still has stock plastic furniture and after about 60 rounds in 1-2 minutes, it gets hot enough that I would need gloves.  Supposedly wood hand guards would help that, but for the AK project, the railed gas block is the main feature that I want, so I have to work with that. 
Title: Re: AK47 Project
Post by: drck1000 on August 03, 2018, 07:26:55 AM
Ordered the SLR Solo MLok S (no sling loop) 13.5" rail this morning.  Will need to cut the sling loop off, but I'm hopeing this rail will allow a couple of things that the 11.5" A version doesn't.  The S version doesn't have the cut out for the sling loop, so I could put grip panels over the key area where my support hand would be.  The sling loop is currently near where my support hand falls on the rail and I think the sling loop contributes to the heat felt as well as doesn't allow a grip panel in that area.  The longer 13.5" rail will also allow a little more flexibility to play adjust the LOP and thus where my support hand ends up.  It can also allow me to grip out past the gas block, but not sure I want that yet.  I went with the 11.5" rail initially because it had a picatinny section at the end and the 11.5" put it right about where I thought I wanted the picatinny section, but it turns out that there are other things that ended up a "hotter" topic. . .
Title: Re: AK47 Project
Post by: drck1000 on April 22, 2019, 06:05:51 PM
New direction started with SLR Solo MLok installed. Added short very grip and some rail covers. Will have to wait and see how this setup helps dealing with heat, but looks like it should help. I’d prefer a little more space between where my support hand ends up and the gas block. So used to support hand grip with ARs where my thumb goes over the top of the rail, so this feels a little awkward. Just have to shoot and see.
Title: Re: AK47 Project
Post by: drck1000 on September 20, 2019, 03:13:48 PM
Dialing in the red dot

(https://flic.kr/p/2hipHHm)
Title: Re: AK47 Project
Post by: Rocky on September 20, 2019, 07:07:18 PM
   Conversation reminds me of the shaky  BI Shoot. :shake: :shake: :shake:
Our mutual friend literally burned wholes thru his "work"  gloves with his AK.  :rofl:

   I've often thought of getting an AK due to their reliability when abused or neglected, but in 5.56 just for ammo compatibility reasons but not sure if being ammo redundant defeats some of the AK advantages.   :-\
Title: Re: AK47 Project
Post by: drck1000 on September 20, 2019, 08:03:05 PM
   Conversation reminds me of the shaky  BI Shoot. :shake: :shake: :shake:
Our mutual friend literally burned wholes thru his "work"  gloves with his AK.  :rofl:

   I've often thought of getting an AK due to their reliability when abused or neglected, but in 5.56 just for ammo compatibility reasons but not sure if being ammo redundant defeats some of the AK advantages.   :-\
That was an awesome time!

Yeah, the guns get super hot. And that’s WITH gloves. Trying these heat protecting gloves.

And yeah, you should get an AK. If nothing more than familiarity of them. Ammo is cheap. Readily available. I hear ya about consolidating calibers tho.
Title: Re: AK47 Project
Post by: Rocky on September 21, 2019, 06:09:54 PM
That was an awesome time!

Yeah, the guns get super hot. And that’s WITH gloves. Trying these heat protecting gloves.

And yeah, you should get an AK. If nothing more than familiarity of them. Ammo is cheap. Readily available. I hear ya about consolidating calibers tho.
So AK would be a good first firearm for me to buy ?  :D
Title: Re: AK47 Project
Post by: stangzilla on September 22, 2019, 08:21:46 AM
   Conversation reminds me of the shaky  BI Shoot. :shake: :shake: :shake:
Our mutual friend literally burned wholes thru his "work"  gloves with his AK.  :rofl:

   I've often thought of getting an AK due to their reliability when abused or neglected, but in 5.56 just for ammo compatibility reasons but not sure if being ammo redundant defeats some of the AK advantages.   :-\

I've shot the century arms ak in 556, and with the mag conversion it was very difficult getting the mag in and out
Title: Re: AK47 Project
Post by: drck1000 on September 22, 2019, 09:27:53 AM
So AK would be a good first firearm for me to buy ?  :D
That works. Or have your “friends” buy them as “firsts”  ;D