2aHawaii
General Topics => General Discussion => Topic started by: adeljobran718 on April 10, 2018, 05:32:03 PM
-
Aloha everyone
As im waiting for my permit to finish processing so i can pickup my SA 1911 what do you guys reccomend for getting. What gun oil and cleaning kits do you guys recommend or is it all personal preference, i was looking at a few on amazon and theres lots of choices.
-
I like breakthrough. I dont have to scub as hard compared to ballistol. And ballistol smells like ass.
I use break throughs oil also.
Sent from my SM-G920V using Tapatalk
-
If you're only cleaning after a few range visits, then a brass bristle brush is good. That's also good for occasional thorough barrel cleaning if you normally use something less abrasive, like a Bore Snake.
I like the Stainless Steel Tornado brushes, since I clean after every range visit. Cleans better than a nylon bristle brush, and is less abrasive than the brass.
https://www.midwayusa.com/product/764150/hoppes-tornado-style-bore-brush-stainless-steel
For the cleaning rod, I prefer the flexible cable style, like you get in the Otis cleaning kits. Less likely to damage the bore, and easier to pull from chamber to muzzle (recommended direction).
I normally use Ballistol for cleaning pistols. Cleans, lubricates and prevents rust. Not harmful to rubber or wood grips. Many threads on here discussing various cleaning and rust-prevention products, but that's my favorite.
I buy patches online when I find them on sale. I like the Butch's Triple Twill patches. You can also just cut up an old T-shirt, but you need to make sure the patch size works well for the barrel diameter. Thicker shirt material = smaller patch size.
I've seen opinions that the #1 thing gun owners do to cause malfunctions is over cleaning them.
http://guncleaninghq.com/gun-cleaning-tips/can-you-over-clean-your-gun/
-
How about a basic 45acp pistol kit - cleaning rod, jag, brush, patches. Most sporting goods and gun shops has them. I like Breakfree CLP and been using it for years. K.I.S.S.
-
Balistoll does smell like ass but best for fighting rust in the tropical air, I've found. I also make my own Ed's Red solvent.
-
Balistol
-
Balistol
:thumbsup:
-
All personal preference. I learned how to clean and lube my first handgun from the salesperson that sold me the gun. It was at shop that also had a firing range, so literally helped me clean the first time I shot the gun.
I would stay away from the kits. I bought a pistol and rifle cleaning kits. I think I still have the rifle kit somewhere, unopened. Handguns don't need much. A cleaning rod, brush head (I have bronze and nylon) and jag, and some patches. I also have bronze and nylon brushes, but you could use old toothbrushes for much of cleaning for 1911. I buy patches, but you can cut up old t-shirts and stuff.
Gun oil? I use Tetra gun oil on my handguns, but mostly because that's what I've had for a while and want to use it up before I move one. I have stuff like Fireclean and Ballistol, but those mostly get used on my long guns. I also have stuff like Militec and SLIP 2000 that I tried on long guns and while good, I just prefer other stuff.
Over time, you'll develop your way of cleaning. Mine started off cleaning more thoroughly each time I shot. Now, it's much less. I have a number of shooting buddies who just run a boresnake. I typically clean if I'm not going to shoot the gun for a while and I typically clean more thoroughly at specific intervals. Kind of like car maintenance schedule.
-
i always keep a can of Ballistol in my range bag in case I need it. good overall general CLP. and is eco-friendly. been around for over 100 years, they must be doing something right.
for barrel cleaning and solvent I use Hoppes #9
for a lube and protectant I use T9 Boeshield, or Lucas gun oil, froglube. next I want to try Hornady 1 shot, heard good things about it
for my 1911 I use a cleaning/barrel rod, patches, brass bore brush and/or nylon, jag (sometimes), nylon brush (or toothbrush).
-
i always keep a can of Ballistol in my range bag in case I need it. good overall general CLP. and is eco-friendly. been around for over 100 years, they must be doing something right.
for barrel cleaning and solvent I use Hoppes #9
for a lube and protectant I use T9 Boeshield, or Lucas gun oil, froglube. next I want to try Hornady 1 shot, heard good things about it
for my 1911 I use a cleaning/barrel rod, patches, brass bore brush and/or nylon, jag (sometimes), nylon brush (or toothbrush).
I also use Hoppes #9 for barrel cleaning. I also have a foaming copper boresnake that I use from time to time.
I use Ballistol at the last patch through the barrel after cleaning as well as quick wipe on guns that are going to be stored for a while.
For range bag, I think I have a small bottle of Fireclean and I small bottle of Mpro7 oil. Fireclean mostly for use on AR and MPro 7 mostly for handguns. Rarely use either though. Maybe the Fireclean if I'm shooting a class.
-
when cleaning the 1911, watch out for the idiot scratch! haha.
gun oil test review
this is be a good read. old article but has a lot of info on 46 different gun oils/CLP/protectants
http://www.dayattherange.com/?page_id=3667
-
I gave away all my brass and aluminum cleaning rods and bought carbon fiber pistol and rifle rods.
For normal cleaning, lubrication and storage I use Hoppe's #9 solvent and Break Free CLP. For heavy carbon build up I use M-Pro 7. I now use Fire Clean in all areas that get heavy carbon build up especially on my revolvers. I clean the revolver thoroughly and then soak the areas that get carbon with the Fire Clean and put the gun away. Next time I fire it the carbon dosn't build up due to the Fire Clean being soaked in to the metal. So no need for M-Pro 7 any more. I also use a spray cleaner like Gun Scrubber or Barrel Blaster for parts I don't want to disassemble during that particular cleaning session such as rifle bolts. And I keep a can of Balistol in my range bag.
-
All personal preference. I learned how to clean and lube my first handgun from the salesperson that sold me the gun. It was at shop that also had a firing range, so literally helped me clean the first time I shot the gun.
I would stay away from the kits. I bought a pistol and rifle cleaning kits. I think I still have the rifle kit somewhere, unopened. Handguns don't need much. A cleaning rod, brush head (I have bronze and nylon) and jag, and some patches. I also have bronze and nylon brushes, but you could use old toothbrushes for much of cleaning for 1911. I buy patches, but you can cut up old t-shirts and stuff.
Gun oil? I use Tetra gun oil on my handguns, but mostly because that's what I've had for a while and want to use it up before I move one. I have stuff like Fireclean and Ballistol, but those mostly get used on my long guns. I also have stuff like Militec and SLIP 2000 that I tried on long guns and while good, I just prefer other stuff.
Over time, you'll develop your way of cleaning. Mine started off cleaning more thoroughly each time I shot. Now, it's much less. I have a number of shooting buddies who just run a boresnake. I typically clean if I'm not going to shoot the gun for a while and I typically clean more thoroughly at specific intervals. Kind of like car maintenance schedule.
HFR did the same for me with my 1st pistol and AR. And when I bought a another pistol, KM showed me how to disassemble and lube. I youtube'd it, but for me seeing it in person helps way more.
-
Hi,
we know Cleaning kit and oil is main factor. Now it;s depend upto you. I have been using Otis cleaning kit. Now gun oil, recently I bought Slip 2000 EWL.
You can read this article (https://www.pewpewtactical.com/how-to-clean-lubricate-a-gun/) How to Clean & Lubricate a Gun. You can also check gun oil reviews here (https://www.guncleaninginfo.com/best-gun-oil.html).