2aHawaii
General Topics => Off Topic => Topic started by: stangzilla on November 06, 2018, 12:52:48 PM
-
what do have for a fixed blade?
could be tactical, hunting, survival, whatever.
this is my oldest fixed blade. got it in the mid 80's
its a Blackjack, around 15 inches total length, maybe more
steel is 1075, so tougher than 1095, .31 inches thick. grip is a rubber type grip.
knife is discontinued. I paid around $60 new. I see it on ebay now for 200-$300 range
now Blackjack knives are owned by Bark River and both brands look very similar. i wouldn't mind getting a new Bark River or Blackjack blade. now they use only tool steel, i think A2 or something like that
i used to use this knife for a hiking/trail knife, but i don't hike too much anymore
i didn't touch it for years and when i took it out a few weeks ago had some rust/tarnish on the blade i couldn't get totally off the steel
tried some flitz but didn't do anything by hand so i used a Dremel and that worked.
post up what you got
(https://farm5.staticflickr.com/4818/30815995037_724a8a37df_b.jpg)
(https://farm5.staticflickr.com/4848/44842538425_c41d5b4af8_b.jpg)
(https://farm2.staticflickr.com/1920/45705926422_7f8814f0e7_b.jpg)
-
My 1 and only Glock(https://uploads.tapatalk-cdn.com/20181106/4414e6754eb3dadf2bd4a19386a94ec8.jpg)
Sent from my SM-G920V using Tapatalk
-
nice! i didn't know they made knives.
-
nice! i didn't know they made knives.
Got it for $19.99 on the Glock website. I think the price went up to $29.99 now. Needed a Kbar. Even though the handle is "plastic", I can't find anything wrong with the knife. Nice solid and good sheath. Especially for the price.
-
That Glock is nice.
I was thinking about getting a fixed blade as I just into knife sharpening with the wet stone.
P.s. Those old hickory carbons are dirt cheap and razor.
-
My only fixed - I tend to favor folders.
-
i tend to favor folders too bc i don't do much outdoors stuff any more
but i'm going to ask Santa for one of these:
https://www.youtube.com/watch?v=kPjdrLRTRZI&t=631s
-
This is my EDC. I carry it on my left side, tip up, as I am a lefty but I shoot right handed and my dominant eye is right. I flattened the sharp top edge so it would be legal to carry as it is no longer a dagger. It is hair popping sharp and I do not use it to cut anything as it is strictly my SD blade.
-
Kabar, everyone knows what they look like. Do not carry it, too big for the type of shorts and tee I wear.
Machete by the nightstand, not a very glorious one, but should do butchery well enough.
-
Firefield 3” because every .22LR trainer needs a bayonet
-
Machete by night stand?? Not a firearm?? 8)
-
Firefield 3” because every .22LR trainer needs a bayonet
Cat is like "Aw crap what is he doing now?!"
-
I have a ESSE 3 somewhere in my room. Everything else is a folder.
-
Winchester and Smith & Wesson(https://uploads.tapatalk-cdn.com/20181107/5b8e6abebe6f792507cd46ae95c655bd.jpg)
Sent from my SM-G360P using Tapatalk
-
My Crocodile Dundee knife!(https://uploads.tapatalk-cdn.com/20181107/9d5a147e47dda55f4b2d50ecddb34346.jpg)
Sent from my SM-G360P using Tapatalk
-
Boker Arbolito El Gigante
Bohler N695 steel. .3 inches thick blade
the sheath may be better than the knife! :D
(https://farm8.staticflickr.com/7388/27418040504_9ac07e77d8_b.jpg)
(https://farm8.staticflickr.com/7573/27418200963_400913f416_b.jpg)
-
Ordered this in July, just got it last week. Made on the Big Island. Hikoito.com
-
I got this at the swap meet on Sunday. I have never seen this brand before.
-
Took me a while to post a pic, but here are some of my fixed blades. I have a couple that I leave in my car as well.
Left to right: (if you click on the pic)
ESEE 4 - One of two that I got in a group buy. The other is pretty beat up and is in my car.
Custom neck knife
Custom Damasus knife that I had a friend make based on my specs.
Custom knife that I got from a friend on a close out deal. One of his first that he sold when he first got started making custom knives. Sort of my TWD blade. ;D
-
picked these up a while ago. haven't really used either of them yet.
too big for EDC. might use the bottom one for work around the house. its like the little brother to my other fixed blade above the El Gigante. leather sheath is really nice
top one is like the bigger brother to my Masada folder. I have the sheath setup for horizontal cross draw, but can be changed to vertical or other angles. the grip feels great in my hand too
https://www.bladehq.com/item--Boker-Plus-Masada-Fixed-Blade-Knife--86602
https://www.bladehq.com/item--Boker-Arbolito-Buffalo-Soul-42--25691
(https://farm8.staticflickr.com/7820/31566700927_7bf45c40d3_b.jpg)
-
picked these up a while ago. haven't really used either of them yet.
too big for EDC. might use the bottom one for work around the house. its like the little brother to my other fixed blade above the El Gigante. leather sheath is really nice
top one is like the bigger brother to my Masada folder. I have the sheath setup for horizontal cross draw, but can be changed to vertical or other angles. the grip feels great in my hand too
Nice! Those will be good to compare steels. The D2 vs the N695
The more I read about D2, I’m hearing about it being difficult to sharpen. I guess I’ll see as I start using my Boker.
-
I just got a Smith's guided diamond sharpening system. its no wicked edge system but i wanted to try a guided sharpener so i went with something more affordable. I tried it on my cheaper blades with 440 stainless and worked great, shaving sharp! :thumbsup:
i'll have to use my D2 knives more so I can get it dull enough to use the sharpener on it and see how it goes
-
I just got a Smith's guided diamond sharpening system. its no wicked edge system but i wanted to try a guided sharpener so i went with something more affordable. I tried it on my cheaper blades with 440 stainless and worked great, shaving sharp! :thumbsup:
i'll have to use my D2 knives more so I can get it dull enough to use the sharpener on it and see how it goes
Haha. Ive been choosing which to use based on steel I want to try testing stuff like how long it holds edge and then sharpen. I have lots of boxes to cut up, so lots to dull them.
-
My Busse Steel Heart can chomp through a 2x4 or two and still shave.
I finally got to take a picture of some of my fixed blades. I got several more laying around somewhere.
In the middle top to bottom
1. Spyderco Ronin no longer made
2. Spyderco Street Bowie
3. Busse Killer Bee no longer made
4. Busse Purebred Fighter no longer made
5. Busse Steel Heart no longer made
6. Cold Steel Copis Machete no longer made. This is the one I keep in my truck for "emergencies."
7. On left, Cold Steel Cullodan no longer made
8. On right, FS HideAway. These are made to order according to your finger size. Made of S30V, razor sharp.
In fact all my knives are razor sharp. I am a knife fanatic, more so than guns.
This is weird. I tried to make a new post and the picture only popped up on my previous post with the picture upside down. When I clicked on it it came right side up. So I had to add the description on this previous post because I can’t make a new post on this thread.
-
He is on my short list of custom makers i want to buy from. Ive been hoping for years that he will come to oahu for a knife show but he doesnt have any plans to.
What steel did u get?Ordered this in July, just got it last week. Made on the Big Island. Hikoito.com
-
..and a lesser knife..and cinderblock..lol
Love me some busse but i dont use them enough.
https://youtu.be/XqTjJgleqPY
My Busse Steel Heart can chomp through a 2x4 or two and still shave.
I need to get all my fixed blades together for a group picture and post it.
-
top knife will be a birthday gift to my nephew who enjoys cooking so I got him a chef's knife from Boker. its their Forge line made of X50CrMoV15 steel. looks really nice.
bottom knife is a Tops Operator 7. 1075 steel, .31" thick all the way from the blade to the full tang, and the blade, tang and hand guard are all 1 piece. hand grip is 1" wide. this knife is like a tank! :thumbsup:
I've always wanted a Tops knife and this one I really like a lot, balance is great. gripping serrations on the hand guard so you can choke up on your grip if its required. its not a huge knife but it is thick.
(https://farm5.staticflickr.com/4886/39672525053_ab347ca95a_b.jpg)
(https://farm5.staticflickr.com/4867/32763063168_99c09c7dcd_b.jpg)
-
Benchmade Follow-up fixed
This is a neck knife that I got to both test out the S30V steel as well as for a smaller option for a fixed blade on my gun belt.
My initial impression is that this is a little smaller than I envisioned for inclusion on my gun belt, but a great size and light weight for a neck knife. I have a couple of "neck knives" but never carried them with the neck lanyard. I might try it with this one. I've been going on walks around the neighborhood for exercise lately, and this would be a good option to have something on me as I'm seeing a LOT more homeless in the area.