2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: Boomah on August 18, 2021, 06:29:29 PM
-
Aloha All,
Wondering if anyone is still doing gunsmithing on AKs here on Oahu. Have gone to Red Letter in the past but that was a few years ago.
TIA & Mahalos :shaka:
Boomah
-
Aloha All,
Wondering if anyone is still doing gunsmithing on AKs here on Oahu. Have gone to Red Letter in the past but that was a few years ago.
TIA & Mahalos :shaka:
Boomah
That's who did work on my AKs. However, that was around spring 2019, so over 2 years ago.
What are you looking to have done? I can check my notes on who I researched locally. A couple of the well known local smiths that I contacted said they don't work on AKs, at least what I was looking go have done.
-
That's who did work on my AKs. However, that was around spring 2019, so over 2 years ago.
What are you looking to have done? I can check my notes on who I researched locally. A couple of the well known local smiths that I contacted said they don't work on AKs, at least what I was looking go have done.
Awesome, thanks for the heads up... Looking at swapping the muzzle brake on my Beryl (Wz.96 clone), it's pressed on & secured with roll pins. So pretty straight forward one would hope ;D
May try giving them a call tomorrow as well, again mahalos! :shaka:
Boomah
-
Awesome, thanks for the heads up... Looking at swapping the muzzle brake on my Beryl (Wz.96 clone), it's pressed on & secured with roll pins. So pretty straight forward one would hope ;D
May try giving them a call tomorrow as well, again mahalos! :shaka:
Boomah
Ahh, I would think that other experienced gunsmiths could do that. If you can't get in touch with Craig, try asking Bushido/Devin and Wayne/Pacific Custom Rifles. They are in the same complex. I would bet that either they could or could point you in the right direction. You could pick up some ammo from Bushido while you're at it. ;D
Craig did a bunch of work on my AKs. All good stuff. Check out my AK Project thread for work on one of them.
-
Ahh, I would think that other experienced gunsmiths could do that. If you can't get in touch with Craig, try asking Bushido/Devin and Wayne/Pacific Custom Rifles. They are in the same complex. I would bet that either they could or could point you in the right direction. You could pick up some ammo from Bushido while you're at it. ;D
Craig did a bunch of work on my AKs. All good stuff. Check out my AK Project thread for work on one of them.
Awesome, will definitely give those guys a try as well. Mahalos! :shaka:
Boomah
-
Jayden from options2inovations did some work for me a few years back on a ak. He was fast.
Wayne won't touch AK, it's mostly Craig's domain