2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: Akubone1 on April 25, 2022, 06:27:20 PM
-
Looking for an opinion. Been considering the CZ TS2 Green but a nice higher end 1911 keeps pulling me back. For target shooting what would you prefer? Although the TS2 is more of a completion gun I wonder if its as accurate as the CZ Shadow 2 Orange for shooting bullseye.
-
https://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_ID=136 (https://www.rockriverarms.com/index.cfm?fuseaction=category.display&category_ID=136)
-
Colt M45A1
-
Just shot a CZ .45 this weekend.
Not sure what model but it shot lights out with cheap Remington UMC hardball ammo.
Update: 97B was the model.
But it’s not a 1911. ;D
I really don’t think you can go wrong either way.
It’s just who you fall in love with.
Ask CMO. :rofl:
-
I’m shooting a couple of Dan Wessons and a Shadow 2. Hard to beat the Shadow 2, but 1911s are just classics. I just love the feel of the 1911. Maybe I’ll try a different make/model of 1911. Need to change things up since I’ve been shooting the same guns for a while.
Thanks for the opinions…saw a CZ TS2 green the other day so I threw that into consideration also. Not sure how that shoots.
-
I have a CZ Shadow Target II and it's a very sweet gun and had a very nice trigger, both SA and DA. I've shot the CZ Orange and I would same similar performance overall to my Shadow, but trigger work not quite a refined. All that are 9 mm versions though.
To me, the CZ 97 and SP-01 lines are similar to steel framed full sized 1911s. The slide configuration of the CZ allows for lower bore axis. I think the difference between steel framed CZ and steel framed full sized 1911s aren't that significant in terms of muzzle flip.
If you "love the feel of the 1911", I would say stick with that. The "I like the looks" of the gun aspect can't be discounted, at least in my opinion. If you're already leaning that way and go a different direction, you're likely to have a certain level of grass is greener over there going on.
-
I’m shooting a couple of Dan Wessons and a Shadow 2. Hard to beat the Shadow 2, but 1911s are just classics. I just love the feel of the 1911. Maybe I’ll try a different make/model of 1911. Need to change things up since I’ve been shooting the same guns for a while.
Thanks for the opinions…saw a CZ TS2 green the other day so I threw that into consideration also. Not sure how that shoots.
Doesn't Dan now make guns for CZ?
https://danwessonfirearmstore.com/dan-wesson-dwx-9mm-pistol/
Kind of like the best of both worlds looks wise. 1911 and Shadow. IDK about performance.
-
Doesn't Dan now make guns for CZ?
https://danwessonfirearmstore.com/dan-wesson-dwx-9mm-pistol/
Kind of like the best of both worlds looks wise. 1911 and Shadow. IDK about performance.
I've been following (on and off) the DWX since they first teased it a while back. We probably won't ever see it as they kept pushing the release date back and no footage of it actually being shot. Everyone's speculating that it never got past the R&D phase.
-
I've been following (on and off) the DWX since they first teased it a while back. We probably won't ever see it as they kept pushing the release date back and no footage of it actually being shot. Everyone's speculating that it never got past the R&D phase.
I was waiting for the DWX too…blend between CZ and Dan Wesson.
-
Looking for an opinion. Been considering the CZ TS2 Green but a nice higher end 1911 keeps pulling me back. For target shooting what would you prefer? Although the TS2 is more of a completion gun I wonder if its as accurate as the CZ Shadow 2 Orange for shooting bullseye.
target shooting you'll want adjustable rear sight, gold dot front sight. long barrel. high end 1911. Nighthawk Custom Chairman :thumbsup:
https://www.nighthawkcustom.com/pistols/chairman
-
I've been following (on and off) the DWX since they first teased it a while back. We probably won't ever see it as they kept pushing the release date back and no footage of it actually being shot. Everyone's speculating that it never got past the R&D phase.
U sure they haven't sold it yet? Online has an add to cart and check out function. Unless when you go to check out it states unknown ETA.
That would make sense though because I haven't seen Garand Thumb, MAC, or like review it yet.
-
https://www.lesbaer.com/PremierIImono.html
-
U sure they haven't sold it yet? Online has an add to cart and check out function. Unless when you go to check out it states unknown ETA.
That would make sense though because I haven't seen Garand Thumb, MAC, or like review it yet.
I followed some threads on other forums about the DWX. People have lost money to fraudulent sites thinking they were ordering the DWX.
From the official Dan Wesson site:
Dan Wesson does NOT sell firearms directly to consumers online,
instead selling our products through an Authorized Dealer network as well as to major wholesale distributors that work with all other FFL dealers. Our authorized dealers can be found here. Please use caution when giving personal payment information online.
The following websites are NOT affiliated with Dan Wesson. www.czgunshop.com, www.czgunstore.com, www.danwessonfirearmstore.com
-
https://www.wilsoncombat.com/classic/
-
My buddy has a stainless version of the SA Trophy Match. Seems like discontinued, but that guns got me started on the interest in Springfield 1911s.
https://www.springfield-armory.com/1911-series-handguns/custom-handguns/1911-national-match-hardball-45-acp-handgun/
Another buddy inherited a Colt Gold Cup National Match. I've handled it, but none of us has shot it. . . :(
https://www.colt.com/detail-page/colt-o5870a1-gold-cup-ntlmtc-45-5-bl
For a target 1911, those come to mind.
-
those high end CZs can outshoot most people
not that i would know, since i do not own and never have shot any guns...
-
https://www.wilsoncombat.com/classic/
https://www.lesbaer.com/PremierIImono.html
I agree. Wilson Combat or Les Baer. Classic design with modern refinements - never out of style.
Nighthawk, but haven't held one in my hand yet, so no opinion.
Photo posted another place, but emphasizing classic design.
Top: WC Classic 9mm
Bottom: LB Premier II 9mm
-
Springfield Range Officer Elite Target 45acp
not a high end 1911. very good for a sub-$1k 1911.
it is now discontinued
Springfield Armory® has just introduced a new 1911 designed for people interested in shooting competitively. It is called— The RO™, “Range Officer™”. The RO™ is designed to give the shooter exceptional quality, at an affordable price. One of the goals was to create a pistol that is acceptable in many different styles of shooting competitions, so the shooter can decide which one he likes most. It is built with the same quality as the TRP™ and Trophy Match™ models, but Springfield has removed the “extras” that result in a higher price. It’s everything you need in a competition model, at an affordable price, and easily upgradable for your future needs.
Share Every detail of the full-sized RO® Elite Target is engineered for accuracy. Forged steel match grade frame and slide are precision-fit for fluid-smooth function, armored with a self-lubricating Black-T® finish that shrugs off corrosion and extremes. The 5-inch stainless steel, match grade barrel, fully adjustable rear target sight, fiber optic front sight, and smooth Gen 2 trigger ensure target-drilling performance. GI recoil system, custom thin-line G-10 grips and ambidextrous safety complete a form with the fit, feel and balance to dominate the range.
trigger pull on my Lyman gauge is 4lbs 14.9oz . average of 5 pulls. its not super light but it is very crisp, short pull trigger
fitment slide to frame was pretty tight when I first got it, now it's broken in some so not as tight to rack the slide
(https://live.staticflickr.com/1798/30211315568_8bfeb7d802_z.jpg)
-
That’s what I was looking at when I changed my mind at the shop and got the Scorpion. Not sure if it was the elite though.
Scorpion had to be suped up. Just found out from a learned gentleman that OG Sig 1911 parts are stamped (pronounced crap) and intended to be changed. (How accurate that is I don’t know but I trust the guy)
I guess good thing I had all the guts changed, even before he told me that.
If I had a chance to do it all again I would’ve got the Springfield.
Happy now with the Sig though after having work done on her and she is sexy.
That RO Elite is a good looking gal too. :thumbsup:
My other learned friend loves the CZ’s
Akubone, you only got 28 pages and a year to go. :rofl:
Keep us posted.
-
Lots of good choices out there. Although I’ll be buying the gun for me, my wife likes the 1911s. (Single stack). She has a harder time shooting the CZ Shadow due to the weight an double stack grip size. DWX would be a good choice but probably in the compact version. We’re considering the Ed Brown EVO 9mm. Little hard to spend the money on something you don’t see in person.
-
Definitely check out some 9mm 1911s. Not sure what the latest and greatest is.
-
That’s what I was looking at when I changed my mind at the shop and got the Scorpion. Not sure if it was the elite though.
Scorpion had to be suped up. Just found out from a learned gentleman that OG Sig 1911 parts are stamped (pronounced crap) and intended to be changed. (How accurate that is I don’t know but I trust the guy)
I guess good thing I had all the guts changed, even before he told me that.
If I had a chance to do it all again I would’ve got the Springfield.
Happy now with the Sig though after having work done on her and she is sexy.
That RO Elite is a good looking gal too. :thumbsup:
My other learned friend loves the CZ’s
Akubone, you only got 28 pages and a year to go. :rofl:
Keep us posted.
Stamped? I know/heard many folks crapping on Kimbers when they went to MIM parts. At one time, I was looking at Kimbers, but that was back before the II series models.
-
https://www.wilsoncombat.com/classic/
Just noticed that model had an adjustable rear sight. That would def be a great option for target pistol. That said, SA RO Elite looks like an awesome setup for the money.
-
Stamped? I know/heard many folks crapping on Kimbers when they went to MIM parts. At one time, I was looking at Kimbers, but that was back before the II series models.
Glocks and CZ P10C use MIM firing pins. CZ P10C's had a few break, enough where people would buy the Cajun Gun Works bulletproof firing pin. Never heard of Glocks having that much of an issue with theirs that people would upgrade it.
-
Stamped? I know/heard many folks crapping on Kimbers when they went to MIM parts. At one time, I was looking at Kimbers, but that was back before the II series models.
I’m guessing he calls MIM stamped.
Was curious why no one mentioned Kimbers. Used to have a good reputation for the older ones.
If you got the money Les Baer. I’ve never had the pleasure of shooting one though.
Still the CZ vs. 1911.
Only time and Akubone will tell.
-
Glocks and CZ P10C use MIM firing pins. CZ P10C's had a few break, enough where people would buy the Cajun Gun Works bulletproof firing pin. Never heard of Glocks having that much of an issue with theirs that people would upgrade it.
IIRC, the MIM parts that caused much of the uproar with Kimber was mainly the hammer, and maybe some other parts. I haven't had an issue with a Glock firing pin. I've only replaced the action spring.
-
I’m guessing he calls MIM stamped.
Was curious why no one mentioned Kimbers. Used to have a good reputation for the older ones.
If you got the money Les Baer. I’ve never had the pleasure of shooting one though.
Still the CZ vs. 1911.
Only time and Akubone will tell.
Yeah, I've shot the first gen Kimbers, or at least before the "II" models came out. I think I was looking at the Eclipse II. Then I went Glock and ARs and by the time I got back to looking at 1911, seems like Kimbers were getting crapped on a lot.
I've shot a couple of Les Baers. They have a great reputation, but from the ones I saw, the tight(ers) tolerances seemed to be more of an issue than improvement. Could have been due to the owners maintenance or care, but I didn't know them well.
I'm betting Akubone gets a 1911 well before the length of time it took CMO to get one. ;D
-
I'm betting Akubone gets a 1911 well before the length of time it took CMO to get one. ;D
Picking up today. :popcorn:
Challenge to Aku to buy one before DCT opens.
-
Picking up today. :popcorn:
Challenge to Aku to buy one before DCT opens.
But it took you 29 pages and a year ! :rofl: :shaka:
Buy once cry once.
(Or as is frequently my case, sell and buy again. :D)
Still need pics.
Both of yours and Aku’s when he gets it. :thumbsup:
-
Picking up today. :popcorn:
Challenge to Aku to buy one before DCT opens.
He's got about 350 more days. . . ::)
-
Buy once cry once.
(Or as is frequently my case, sell and buy again. :D)
This is my main reason for spending on the Colt. The Scorpion was 1st draft choice until I saw the M45. And then it grew on me more and more. To a point where I went all in.
Aku, I hope you set a budget and go from there. My budget was just on the gun itself. Not mags, ammo, equipment, etc...
-
you can get a smith to build you a 1911 from a Caspian frame for some of these prices.
-
you can get a smith to build you a 1911 from a Caspian frame for some of these prices.
Any local smiths that you would recommend for 1911 work? Say minor tuning, sight fitting, etc?
-
Ed Masaki. I don't see him around often. When I first approached him he had a long wait list.
I did use Dave Salyer on the mainland. He's a mechanical engineer and shooter.
-
Any local smiths that you would recommend for 1911 work? Say minor tuning, sight fitting, etc?
PM sent.
-
Ed Masaki. I don't see him around often. When I first approached him he had a long wait list.
I did use Dave Salyer on the mainland. He's a mechanical engineer and shooter.
Ahh, I'll look up Dave Salyer.
It's been a while since I've seen Ed Masaki as well. I think last time I saw him was 2019ish.
-
I have enough 1911s for now, don't shoot them anyway nowadays... down the 22LR BR rabbit hole......
However, if I were to think of 1911 pistols, I would probably order one from Wilson Combat or Alchemy Custom.
Wilson Combat doesn't need explanation. Just choose a basic model and add-on whatever accessories/options you want like
adjustable sights, ambi-safety, cerakoted slide, etc. Your price is what you ordered.
Alchemy Custom Weaponry: Alchemy Custom Weaponry was started by Rob Schauland who used to work for Les Baer.
In the old Les Baer commercials, he's the guy in the orange shirt racking the slide on the Outdoor Channel on TV. I sent three
Les Baer 1911 Premier II pistols to him, and he did a fantastic job at a reasonable price. He got an offer to basically manage
Cabot company which makes the really high-end 1911s. Cabot bought his company - Alchemy Custom Weaponry which does gunsmithing
and produces a brand of their own. Producing Alchemy 1911s was what Rob Schauland wanted to do with his company. I would buy a 1911 from
Alchemy before I buy a Cabot 1911..............
Google: alchemy custom weaponry Rob Schauland
-
Sorry to high jack, but can you explain why you want a smith to do simple stuff like sights on a 1911? I mean, can't someone who knows how to build an AR correctly do it? Or is working on a 1911 like a 22LR tac driver rifle and is vudoo.
And what do you mean by tuning?
-
types of sight cuts. For example you can't install a Bomar sight on a slide cut for Novak.I tried installing sights on my slide and I did not have the right tools or the experience to do it. I also wanted a new front sight as my older Springfield had a staked on front sight. Dave Salyer cut a dovetail and installed a higher blade.
-
1) Sorry to high jack, but can you explain why you want a smith to do simple stuff like sights on a 1911? 2) I mean, can't someone who knows how to build an AR correctly do it? Or is working on a 1911 like a 22LR tac driver rifle and is vudoo.
3) And what do you mean by tuning?
1) For stuff that need fitting. Most (if not all) of the 1911 sites are dovetail, and not uniform. Plus, many of the good aftermarket sights are oversized and meant to be fitted. Prior experience is also a plus.
2) Very different, at least to me. Assembly vs fitting.
3) Tweaking of things to ensure proper or better function. Can be a variety of things. Adjusting springs, filing, etc.