2aHawaii
Tools and Uses => Firearms and Accessories => Topic started by: 2aHawaii on November 04, 2010, 10:36:03 PM
-
So I picked up one of those Nitrx TR2 scopes that were on clearance at Natchez. Well I didn't pick it up from them, but got the same deal and saved a little on shipping. I just got the scope in today and wanted to share some pictures.
I don't have much experience with higher end scopes so take my notes with a grain of salt. The turrets are pretty nice, the windage and elevation clicks are positive and clicky. :) To adjust the turrets, you pull up on the cap and push back down to lock. From counting the rotations, the windage had almost 3 full rotations, giving about 45 MOA of adjustment each way or 90 MOA total. The elevation gave almost 2 full rotations each way, giving 59 MOA of elevation total. I haven't seen how it looks out at the range yet and don't know when I will.
Without further ado, here are the pics.
Full scope and the box
[smg id=36]
Made in Japan, woohoo
[smg id=37]
Turrets locked down
[smg id=38]
Turrets up
[smg id=39]
-
very nice :thumbsup:
-
Looks good! It has a lot of elevation and windage which is always good.
Gotta give us reviews when you get er mounted and zeroed. :shaka:
-
Looks good! It has a lot of elevation and windage which is always good.
Gotta give us reviews when you get er mounted and zeroed. :shaka:
X2