So I picked up one of those Nitrx TR2 scopes that were on clearance at Natchez. Well I didn't pick it up from them, but got the same deal and saved a little on shipping. I just got the scope in today and wanted to share some pictures.

I don't have much experience with higher end scopes so take my notes with a grain of salt. The turrets are pretty nice, the windage and elevation clicks are positive and clicky. To adjust the turrets, you pull up on the cap and push back down to lock. From counting the rotations, the windage had almost 3 full rotations, giving about 45 MOA of adjustment each way or 90 MOA total. The elevation gave almost 2 full rotations each way, giving 59 MOA of elevation total. I haven't seen how it looks out at the range yet and don't know when I will.

Without further ado, here are the pics.

Full scope and the box
[smg id=36]

Made in Japan, woohoo
[smg id=37]

Turrets locked down
[smg id=38]

Turrets up
[smg id=39]

very nice

Looks good! It has a lot of elevation and windage which is always good.
Gotta give us reviews when you get er mounted and zeroed. 

Looks good! It has a lot of elevation and windage which is always good.
Gotta give us reviews when you get er mounted and zeroed. 

X2