Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - chapnelson

Pages: [1]
1
I think you're wise to think layered, and the 3 primary scenarios of staying in, leaving by vehicle, leaving by foot. I'd just use backpacks instead of wheeled luggage.Only problem I've found with wheeled luggage is the sidewalk/asphalt has to be like the lobby of a 5 star hotel in order for them to roll smoothly, otherwise they're wanting to flip over and you wind up dragging everything. I could see that for a short distance, like to a vehicle, but not for miles, particularly if your plan is to go up.

Cougar, that's some great info!

2
Reloading / Re: Casting PICS HEAVY
« on: April 22, 2011, 03:44:32 PM »
I usually do this for a couple of hours at a time. Takes about 15 mins to set up, same to tear down. Once I get the rythym going I get 2 per minute.
When I get tired I just pour the remainder from the pot into the muffin pan, and set it on the concrete to cool. Each muffin is about 2-3#s of refined
lead alloy.

Hope this is useful - casting is a lot of fun, and a cheap way to keep stocked in bullets.

Mahalo, Chaps  :shaka:
3
Reloading / Re: Casting PICS HEAVY
« on: April 22, 2011, 03:38:45 PM »


Just ladled lead into mold; shiny stuff on top cools on sprue plate. I use a peice of
wood to tap the sides of the mold and then tap the sprue plate open to knock the
excess back into the pot. Then I just reach down, open the mold and drop the bullets into my bucket
under the grill.



230gr .45 ACP Bullets quenched in water. Some like to drop them on a soft towel
and just air quench them. If you water quench, use a deep bucket, not a shallow bowl,
so the bullet passes through a lot of water while it cools so its hard when it hits the bottom
and doesn't dent.
4
Reloading / Re: Casting PICS HEAVY
« on: April 22, 2011, 03:37:44 PM »


Need to skim!



Just dropped the flux in.
5
Reloading / Re: Casting PICS HEAVY
« on: April 22, 2011, 03:37:14 PM »


Bag of flux, made up of shredded credit cards and left over candle wax.
Sawdust works well too. Once everything is melted, and you've pulled out the
stuff that won't melt, you skim the dross of the top - cloudy stuff. Then when its
mirror looking on top, you drop just a little bit of flux on top which ignites the gas
that forms on top of the metal and burns it off. It leaves a little cloudy stuff on top
and you skim that off.


Safety gear: Eyepro, mask, oven mitt. I also wear overalls and closed toe shoes.
Hot metal splashes are a bummer.
6
Reloading / Re: Casting PICS HEAVY
« on: April 22, 2011, 03:33:40 PM »


Want Scrap?



I like the Lee 2 cavity molds. Cheapo muffin pan. Squirt bottle in back for bullet
lube for finished bullets, and also to lube the mold.
7
Reloading / Re: Casting PICS HEAVY
« on: April 22, 2011, 03:32:04 PM »


Close up of the pot.



Pile of stuff that doesn't melt, like the weight clips, and also zinc weights. I sometimes
use a magnet to skim the surface.
8
Reloading / Casting PICS HEAVY
« on: April 22, 2011, 03:30:32 PM »
I took pictures during my last casting. Mahalo, Chaps



Here's everything I use. I put a cast iron pot on the side burner of my grill.
I cut a piece of plywood to fit the inside of the grill as a work top, I also cut
a piece of scrap and wrapped it in foil to cover the space between the pot
and the plywood.

The wood on the pot is a splash guard when i put scrap weights into hot lead.

The blue bucket is full of scrap weights I got from a tire shop.

The white bucket under is full of water for quenching bullets.

I keep the mold on the burner to heat it up; sprayed with pam - nice and brown so it doesn't stick.

I use a cheap yard sale ladle and a used grill fork with bent tines as tools.

There's a cheap brown oven mitt on the right, on top of a yard sale aluminum muffin pan I use
to make ingots out of the leftover lead.
9
Reloading / Re: Anybody cast bullets?
« on: March 02, 2011, 12:53:38 PM »
Old Guy, wow! That's a lot of casting!

I'm on the low budget end admittedly, and I don't see myself ever really getting fancier. But there's something to be said about that freshly cast bullet, nice and shiny, that you made. I'm getting to the point when I can "feel" when it's not going to be quite right y'know, the lead is too thick maybe, or the mold isn't the right temp. Drop em right back into the pot for another chance, until they come out just right. Then you seat it in a case over your own recipe, to fire out of your favorite firearm. I have yet to hunt with my own cast bullets, but I hope to take care of that next year on the mainland! Think I'm gonna cast some 230gr .45s tonight.
10
Reloading / Re: Anybody cast bullets?
« on: March 01, 2011, 06:13:21 PM »
I'll take pictures next time and post them if that's okay here?
Mahalo, Chaps
11
Reloading / Anybody cast bullets?
« on: March 01, 2011, 09:09:26 AM »
Would anyone be interested in a child board on casting bullets?

I got into casting a couple of years ago, under the coaching of some wise old guys on the 'net. From Salvation Army I picked up a cast iron pot with wooden handle, oven mitts, aluminum muffin tin (the dirtier tin the better, pick the ones that are coated with the brown residue from pam or oil), ladle and tongs (make sure they have wood or plastic handle) - $10. I got a bunch of candle wax, shredded plastic, and fine saw dust for fluxing - $0. Picked up the inexpensive Lee 2 cavity molds, sprayed them with pam - $20 ea. In the past 2 years I've picked up close to 200# of scrap lead alloy, cast them into the muffin tin - $0. Each muffin is about 2.5#, which is roughly 100 158gr 38/357 bullets.

I use the side burner on my grill, wear coveralls, close toed shoes, and a dust mask - eventhough I'm outside, when you look into the pot, its good to have something over your face. I use an old 5 gal plastic bucket full of water to quench, and I cut a piece of scrap plywood to fill the cooking area of my grill so I don't splash anything on a surface that would come in contact with food. Once I get in a rhythym I can cast about 100 an hour, and I go for a couple of hours. Its therapeutic, like reloading.

Cast akamai!
Chaps

12
Reloading / Re: Who reloads their own ammo?
« on: March 01, 2011, 08:50:54 AM »
I reload for pistol only right now, .38/357, .44 SPL/MAG, .45ACP. I use a Lee Hand Press with Lee carbide dies, and I like the Lee factory crimp dies.
I also cast for all of the above using, you guessed it, Lee 2 cavity molds.

Given I live in a small place, move every 2-3 years, seldom shoot more than a couple hundred rounds at a range trip, an expensive bench mounted
set up didn't make sense to me. Not to mention that a lot of the old guys I know over at GBO admitted to me that they've pretty much gone back to a
hand press or simple press after reloading for decades. It takes longer, but I feel like I am more focused on each round. It also all stays in a tool box
that I can throw in the back of my SUV if needs be.
13
General Discussion / Re: New Member? Introduce yourself here!
« on: February 28, 2011, 01:30:30 PM »
Aloha, been on Oahu 5 years but didn't discover 2aHawaii until recently. Glad to see some avid 2A enthusiasts in this beautiful state.
I cast & reload, have shot IHMSA/PPC/IDPA but not for some time.

Mahalo, Chaps
14
Never said I was gonna eat MY pets ... ;)
15
For water ... rainbarrels & biosandfilter. Ever measure how much comes off your roof? Bleach is tough, as are purification tablets, on the kidneys. It wouldve been better to brew 5 gal buckets of weak ale, like the sailors used to do when fresh water was scarce.

For food ... Were good for a couple months, with the occaissional chicken, mongoose, fish or pet in the stock pot. This island could feed a lot of people if they changed their diet.
16
We were bugging out when we found out were outside the danger area for a tsunami, so we bugged in. The hardest part of packing was guns & ammo. If it's just a 1' wave like had, folks wouldn't like to have armed folks. But if it had been a really bad one, I wonder how much like Haiti it wouldve gone ... lootin, riots, violence ... in which case being armed is wise.
Pages: [1]