Recommend Bullets (Read 8312 times)

BLKDRGN

Recommend Bullets
« on: November 27, 2013, 08:10:23 AM »
We leave for a trip and I had no time to do any research on reloading. I did pick up an RCBS Rockchucker though. We will be going to a few gun stores and I don't know what to look for. Please recommend the brand, grain, etc. on what would be pretty good. I have empty used shells at home but I can pick some up while I'm there. Does it matter the brand or are they all the same?

These don't have to be the best, just decent
9mm - 115gr Hornady FMJ-RN , 124gr, or 147gr
.45 ACP - 200gr SWC
.38 Special - 148gr HBWC or 158 gr SWC/RN/JHP

These I want pretty good for 600 and maybe up to 1500 yards
.308 Win - 175gr SMK
.338 Lapua - 285gr hornady bthp or the 300gr smk bthp
« Last Edit: November 27, 2013, 10:39:10 AM by BLKDRGN »
Google it cause every question is a dumb question.

Jl808

Re: Recommend Bullets
« Reply #1 on: November 27, 2013, 08:29:53 AM »
Not sure about the others but for 9mm, the heavier, the more stable and more accurate.

So...
9mm - 147gr or 124gr (not 115gr)
I think, therefore I am armed.
NRA Life Patron member, HRA Life member, HiFiCo Life Member, HDF member

The United States Constitution © 1791. All Rights Reserved.

BLKDRGN

Re: Recommend Bullets
« Reply #2 on: November 27, 2013, 08:43:13 AM »
Thanks I updated my list. Does brand not matter? What about shape or type like hollow points, etc. Meaning do we just walk in the store and pickup any bag as long as it's the correct grain weight?
Google it cause every question is a dumb question.

Teichi

Re: Recommend Bullets
« Reply #3 on: November 27, 2013, 08:49:12 AM »
This is from the Encyclopedia of Bullseye Pistol.

Here is a 9mm load that David Sams has been using for testing Beretta 92 barrels and his completed guns that has been proven sub 1.5" groups at 50 yds is as follows:

Starline brass
115gr Hornady FMJ-RN bullet
6.0 - 6.2gr Alliant Power Pistol powder
Rem #5  1/2 SP primers
O.A.L. -- 1.120" no-crimp
Out of a barrel test fixture using Bar-Sto barrels groups have consistently run between  .975" to 1.5" averaging about 1". Through David's completed 92F's, he claims that they have been running 1.3" - 1.5" as a reminder these are hand-loaded.

I have personally tried this load and is is accurate and hot.

Try different bullet weights and types to find what shoots best in your pistol.

Teichi

Re: Recommend Bullets
« Reply #4 on: November 27, 2013, 08:51:41 AM »
What are you planning to use the reloads for?
Hunting?
Paper Targets?
IPSC?IDPA?

BLKDRGN

Re: Recommend Bullets
« Reply #5 on: November 27, 2013, 09:05:07 AM »
What are you planning to use the reloads for?
Hunting?
Paper Targets?
IPSC?IDPA?

Just Paper Targets
Google it cause every question is a dumb question.

Jl808

Re: Recommend Bullets
« Reply #6 on: November 27, 2013, 09:14:35 AM »

This is from the Encyclopedia of Bullseye Pistol.

Here is a 9mm load that David Sams has been using for testing Beretta 92 barrels and his completed guns that has been proven sub 1.5" groups at 50 yds is as follows:

Starline brass
115gr Hornady FMJ-RN bullet
6.0 - 6.2gr Alliant Power Pistol powder
Rem #5  1/2 SP primers
O.A.L. -- 1.120" no-crimp
Out of a barrel test fixture using Bar-Sto barrels groups have consistently run between  .975" to 1.5" averaging about 1". Through David's completed 92F's, he claims that they have been running 1.3" - 1.5" as a reminder these are hand-loaded.

I have personally tried this load and is is accurate and hot.

Try different bullet weights and types to find what shoots best in your pistol.

Teichi -- interesting. The tip about the heavier bullets came from the pistol side RSOs. They said that 9mm flies fast so a heavier bullet makes it more stable.

But I agree that what will work best usually depends on your purpose and what your firearm likes.
I think, therefore I am armed.
NRA Life Patron member, HRA Life member, HiFiCo Life Member, HDF member

The United States Constitution © 1791. All Rights Reserved.

Teichi

Re: Recommend Bullets
« Reply #7 on: November 27, 2013, 09:18:46 AM »
45ACP - 185-200gr SWC make light recoil target loads that cut nice round holes, but may not feed reliably in your gun. You can try the 200gr plated RN
38 SPL - 148gr HBWC are the most accurate and low recoil. 158 gr SWC/RN/JHP are pretty much the standard service load.

Teichi

Re: Recommend Bullets
« Reply #8 on: November 27, 2013, 09:43:22 AM »
Teichi -- interesting. The tip about the heavier bullets came from the pistol side RSOs. They said that 9mm flies fast so a heavier bullet makes it more stable.

But I agree that what will work best usually depends on your purpose and what your firearm likes.
Not always true about heavy bullets and velocity. Barrel twist rate also plays a factor. Distance plays another. A good heavy bullet load at 25 yards may be lousy at 50 yards.

Per CMP and Military Service Pistol Rules, only 115gr and 124gr FMJRN can be used for 9mm Service Pistol. NRA Rules differ for Centerfire Pistol and other weights may be used.

Lighter bullets mean I can recover quicker on rapid fire stages. They also cost less than heavier bullets which means I can practice more.

338KID

Re: Recommend Bullets
« Reply #9 on: November 27, 2013, 09:54:11 AM »
338lm either the 285gr hornady bthp or the 300gr smk bthp. Me I prefer the hornadys
Fast is fine , accuracy is final

Jl808

Re: Recommend Bullets
« Reply #10 on: November 27, 2013, 09:54:17 AM »
Teichi - thanks for the tip!  Learning new things everyday. :thumbsup:
I think, therefore I am armed.
NRA Life Patron member, HRA Life member, HiFiCo Life Member, HDF member

The United States Constitution © 1791. All Rights Reserved.

mnpfamily

Re: Recommend Bullets
« Reply #11 on: November 27, 2013, 10:56:58 AM »
Teichi -- interesting. The tip about the heavier bullets came from the pistol side RSOs. They said that 9mm flies fast so a heavier bullet makes it more stable.

But I agree that what will work best usually depends on your purpose and what your firearm likes.
May depend on which of the ROs you talked to.  I don't know what the Bullseye guys are loading, but many of the USPSA shooters tend to lean towards the heavier bullets with relatively fast powders.  A lot load 147 grn. bullets for 9mm because (using the same powder), it takes less powder to reach the same powerfactor with a heavier bullet than a lighter bullet.  And although many say "recoil" is subjective, I think there is a big difference between the recoil control needed to get back on target with a 115 grn. bullet travelling at 1090 FPS and a 147 grn. bullet that only needs to be loaded to 860 FPS to achieve the same minimum PF.  To be honest, both my wife and I prefer the 147s as there seems to be less muzzle flip.  Some however, especially those with better recoil control, prefer the slightly "quicker" feel of the 124s.  The 124s are like a middle ground between the snappy 115s and the slow 147s.

mnpfamily

Re: Recommend Bullets
« Reply #12 on: November 27, 2013, 11:28:46 AM »
We leave for a trip and I had no time to do any research on reloading. I did pick up an RCBS Rockchucker though. We will be going to a few gun stores and I don't know what to look for. Please recommend the brand, grain, etc. on what would be pretty good. I have empty used shells at home but I can pick some up while I'm there. Does it matter the brand or are they all the same?

These don't have to be the best, just decent
9mm - 115gr Hornady FMJ-RN , 124gr, or 147gr
.45 ACP - 200gr SWC
.38 Special - 148gr HBWC or 158 gr SWC/RN/JHP

These I want pretty good for 600 and maybe up to 1500 yards
.308 Win - 175gr SMK
.338 Lapua - 285gr hornady bthp or the 300gr smk bthp
I like 147s for 9mm, but would take 124s over the 115s.  Just my opinion, but you might want to stay away from plated or moly coated bullets at first.  Takes a little more time/precision to get the flair/bell die set correctly, and very easy to screw up the crimp die setting, possibly leading to endless frustration chasing solutions to less than acceptable accuracy and keyholing or tumbling bullet issues.  If your gun can take it, you might want to look at lead bullets.  Admittedly they are a little more difficult to work with than FMJ or CMJ, but I've had good results with them and they are a lot cheaper.  SNS Casting makes some good lead bullets and are readily available online.  They are all I use for 9, .40 and .45.  The only jacketed stuff I use is for .38 super and I order those from Montana Gold.  Good bullets, but the prices have become borderline crazy.  Kinda depends on what you're looking for and what you want to spend.

Just a suggestion, but you might want to consider  "sample" amounts before committing to a large number of any one shape or make of bullet.  Some bullets don't feed well in certain guns, or some have better accuracy than others.   

Jl808

Re: Recommend Bullets
« Reply #13 on: November 27, 2013, 02:30:11 PM »
mnpfamily -- thanks for that explanation. It makes a lot of sense. FWIW, it was RSO Tony who suggested that I use the heavier bullets for the 9mm.
I think, therefore I am armed.
NRA Life Patron member, HRA Life member, HiFiCo Life Member, HDF member

The United States Constitution © 1791. All Rights Reserved.

mnpfamily

Re: Recommend Bullets
« Reply #14 on: November 27, 2013, 10:27:48 PM »
I didn't mean to imply that anyone was more right or wrong.  Just sharing that, from my experience, many of the USPSA  shooters (shooting Production Div. anyway), are using  either 124 or 147 grn bullets for various reasons.  Like y'all posted above, it also largely depends on the firearm used as well as the respective shooting sport involved.