WalMart got gun cleaning supplies...and then the store manager said.... (Read 19304 times)

rklapp

I checked out the PC store last month because I noticed that their website listed many of the supplies available there. I was sadly disappointed with what I found. I'm looking for a source of gun scrubber that's under $10.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

dustoff003

I checked out the PC store last month because I noticed that their website listed many of the supplies available there. I was sadly disappointed with what I found. I'm looking for a source of gun scrubber that's under $10.
What do you mean when you say gun scrubber? Are you looking for a chemical cleaner or a physical cleaning device?


Sent from my iPhone using Tapatalk

rklapp

https://www.walmart.com/ip/Gun-Scrubber-Synthetic-Safe-10-oz-Cleaner/21949945

Or any equivalent cleaner... It has to be floated across the ocean so not cheap here.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

oldfart

https://www.walmart.com/ip/Gun-Scrubber-Synthetic-Safe-10-oz-Cleaner/21949945

Or any equivalent cleaner... It has to be floated across the ocean so not cheap here.
...
There aren't many spray chemicals safe to sell to the general public.
Msds for gun scrubber shows Hexane, which may be phased out due to health risks.
If you like to blast your gun clean, try an acetone-based brake cleaner.
You will need to read the can labels to identify the ingredients.
Why? The manufacturers keep changing the formulas due to health risks.

Remember my trick to clean the lube off loaded ammo? ....Same thing.

The ingredients to look for are acetone and toluene, and little or no methanol.
Use this stuff outside or you will be sorry.
Works great for blasting roaches or starting a BBQ.
What, Me Worry?

changemyoil66

...
There aren't many spray chemicals safe to sell to the general public.
Msds for gun scrubber shows Hexane, which may be phased out due to health risks.
If you like to blast your gun clean, try an acetone-based brake cleaner.
You will need to read the can labels to identify the ingredients.
Why? The manufacturers keep changing the formulas due to health risks.

Remember my trick to clean the lube off loaded ammo? ....Same thing.

The ingredients to look for are acetone and toluene, and little or no methanol.
Use this stuff outside or you will be sorry.
Works great for blasting roaches or starting a BBQ.

I just switched from Balistol to Breakthrough.  Breakthrough is oderless and safe.  Cleans way better than balistol and their oil is better also.  My slide on my VP9 would stick out of battery about 1/8 inch when I push it back on purpose.  Now it comes forward.

rklapp

Remember my trick to clean the lube off loaded ammo? ....Same thing.
Acetone eats plastic but works great on your ammo cases. I use the synthetic safe cleaner to spray the inside of the upper receiver and inside the hand guard.

Too bad freon isn't available anymore. That stuff was awesome as a solvent.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

oldfart

Acetone eats plastic but works great on your ammo cases. I use the synthetic safe cleaner to spray the inside of the upper receiver and inside the hand guard.

Too bad freon isn't available anymore. That stuff was awesome as a solvent.
...
We used to use Freon and perchloroethylene at the shop.
Freon might still be found as LPS contact cleaner spray.
Not to be confused with the CFC-free version.

Not all plastics are affected by acetone.
But just to be safe, don't buy plastic guns.  :rofl:
What, Me Worry?

Inspector

...
We used to use Freon and perchloroethylene at the shop.
Freon might still be found as LPS contact cleaner spray.
Not to be confused with the CFC-free version.

Not all plastics are affected by acetone.
But just to be safe, don't buy plastic guns.  :rofl:
Thanks for all your recommendations OF. I have been looking for an alternative spray cleaner.

You and I both own a plastic gun. But I'm a revolver kinda guy.  :love: :love: :love:  Hard to make a revolver outta plastic.
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

oldfart

Thanks for all your recommendations OF. I have been looking for an alternative spray cleaner.

You and I both own a plastic gun. But I'm a revolver kinda guy.  :love: :love: :love:  Hard to make a revolver outta plastic.
...
OK, I do own 1 block and that's plenty for me.  Ruger LCR is a fine plastic revolver. :rofl:

So I went to Wal-Mart in pearl city and bought a can of gumout carb cleaner for $3.44.
It contains acetone and toluene but no methanol.  :thumbsup:
Hexane based cleaner can be had in CRC MAF sensor cleaner. But it's expensive for a tiny spray can.
What, Me Worry?

rklapp

...
OK, I do own 1 block and that's plenty for me.  Ruger LCR is a fine plastic revolver. :rofl:
So I went to Wal-Mart in pearl city and bought a can of gumout carb cleaner for $3.44.
It contains acetone and toluene but no methanol.  :thumbsup:
Hexane based cleaner can be had in CRC MAF sensor cleaner. But it's expensive for a tiny spray can.
I bought a bottle of carb cleaner but it melted the plastic cover for my scope. I also bought engine degreaser spray. It stinks up the house unless you rinse it with water first. It's great for softening up the carbon deposits in the BCG. The contact cleaner spray (now with difluoroethane) is great for cleaning out the lubricants stuck in the receiver corners.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

oldfart

I bought a bottle of carb cleaner but it melted the plastic cover for my scope. I also bought engine degreaser spray. It stinks up the house unless you rinse it with water first. It's great for softening up the carbon deposits in the BCG. The contact cleaner spray (now with difluoroethane) is great for cleaning out the lubricants stuck in the receiver corners.
...
I never felt the need to clean my firearms with anything stronger than Triflon or breakfree, WD40, bore solvent, and brushes. Maybe some compressed air. I save the carb and brake cleaner for the ammo.

What, Me Worry?

MuffinMan

...
I never felt the need to clean my firearms with anything stronger than Triflon or breakfree, WD40, bore solvent, and brushes. Maybe some compressed air. I save the carb and brake cleaner for the ammo.


maybe you could soak your guns and ammo in Polmolive.  Worked for Madge.  Makes your hands soft too.  :rofl: :wave:

oldfart


maybe you could soak your guns and ammo in Polmolive.  Worked for Madge.  Makes your hands soft too.  :rofl: :wave:
...
Oh man you showing your age. That commercial was from the 60's and Madge died 13 years ago. :rofl: :wave:
What, Me Worry?

rklapp

I only use dish soap when "softening" the crud in my spent ammo cases. I add a drop to the ultrasonic cleaner. I also add a bit of Lemishine but not sure if that helps so won't buy any more after I run out.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

mrgaf

Was at PC Walmart today.... yup there are some cleaning supplies but looks like they are pretty much cleaned out (no pun intended) :shaka:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

macsak

Hey Dusty I just missed you by about 20 minutes. I went over there to the Kapolei store. They had the same cleaning kit that is shown in the OP's photo. And they have the large bottles of Hoppe's #9 that is also in the photo. Only $12.67. I know where to go to get Hoppe's. But it doesn't appear they are making room for new cleaning supplies.

At town store now
Nothing on shelves


Sent from my iPhone using Tapatalk

rklapp

The Electronic Cleaner at Napa is cheaper than CRC. Alternatively, the deicer is cheaper but not sure if methanol and ethylene glycol is a good mix for firearms.
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

oldfart

According to the msds for Napa electronic cleaner, it contains mostly methanol and methyl acetate.
I suppose it would be safe for plastic parts. Let us know if it is a good sub for gunscrubber.
What, Me Worry?