Went to KHSC with another member yesterday.
Testing out 762x39 AR15 upper for developmental use by another company for future products.
Here are the parts I used.
RST Upper Receiver, BCG, Quad Rail & Muzzle Brake
Standard Arms 16" 1/10 Twist 762x39 Barrel 4140 Steel, Micropolished bore.
AIM Sports 3-9x50 Scope
Lowers
Upper Left Lower Recvr - NFA Polymer Lower with Ergo Grip, LMT Buttstock & Rock River 2-Stage Trigger 2/2.5lbs #1
Right Side Lower Recvr - NFA Polymer Lower with MilSpec STD Trigger 5lbs #2
Lower Side Lower Recvr - NFA Polymer Lower with Standard Poly Trigger Group 4.5lbs #3
First 30 Shots Sighted in Scope with Lapua Brass Ammo 123gr FMJ with Lower #2
Next 10 Shots Silver Bear 123gr FMJ
Target Shown: 100 Yards
Switched to Lower #1
In the Center was 4 Shots Left Side is Silver Bear 123gr One Flyer
In the Center was 4 Shots Lower Right Side is Lapua Brass!
Upper Right target was 5 shots rapid fire
After that we shot another 60 rounds at all the metal at 220 yards using various ammo
Tula, Wolf, Silver Bear & Lapua all with good results and not one misfire.
Not one miss with Lapua or Silver Bear!
Felt recoil is still a little high compared to my other comp. Side blast was low and quiet.
Need to work on this.
The other 2a'er that came had too much fun.......
Shell Casing L to R
Lapua Brass, Tula, Silver Bear, Last Case to right is a Silver Bear shot by an Arsenal AK
You can see the difference in the Firing Pin Strike.