Replacing a VEPR AK (7.62X39) bolt (Read 2856 times)

causa mortis

Replacing a VEPR AK (7.62X39) bolt
« on: August 07, 2014, 12:25:53 PM »
So, since VEPRs are going to become a more expensive and harder to find rifle system, I was thinking about spare parts for my VEPR AK. And from the research I did, it looks like the nearest replacement for a VEPR bolt would be from a Bulgarian AK74: http://tinyurl.com/qdhglxd.

The only big difference between the two would be the 0.055 inch less space on a Bulgarian bolt face. Would that fraction of an inch difference make it an incompatible replacement part for a VEPR?

BigBlue

Re: Replacing a VEPR AK (7.62X39) bolt
« Reply #1 on: August 07, 2014, 12:46:13 PM »
Check the headspace and find out?

AK tolerances being what they are; my guess is 5 different bolts could have 5 different sets of dimensions. You could always try different bolts, especially if you can return the ones that don't work. Tighter headspace would be easier to fix than excess.

Suka would probably be a good person to ask; I believe they've built several AK's. Based on what I've read re-headspacing an AK barrel is doable but a minor PITA.

suka

Re: Replacing a VEPR AK (7.62X39) bolt
« Reply #2 on: August 07, 2014, 10:10:26 PM »
on the AKs the tolerance are very loose.
many types of bolts are interchangeable.

even on a no go guage the AK will still function,



causa mortis

Re: Replacing a VEPR AK (7.62X39) bolt
« Reply #3 on: August 08, 2014, 11:52:43 PM »
Quote
on the AKs the tolerance are very loose.
many types of bolts are interchangeable.

even on a no go guage the AK will still function,

So, you're saying that any other 7.62X39 bolt could be put in and it would function fine and without fear of internal damage?

suka

Re: Replacing a VEPR AK (7.62X39) bolt
« Reply #4 on: August 09, 2014, 05:27:21 AM »
yes
many parts including the bolt are interchangeable without blowing up