Pulled the Python Trigger (Read 21114 times)

2ahavvaii

Re: Pulled the Python Trigger
« Reply #20 on: January 10, 2018, 09:18:05 AM »
Premature discharge?   :rofl:

Failure to fire?   :shake:

Inspector

Re: Pulled the Python Trigger
« Reply #21 on: January 10, 2018, 12:20:15 PM »
YG's has a couple of the new Colt Cobra's if that's any consolation.   ;)
Did you fondle, uh I mean hold one?  :love:

I would hope the quality of the past would still be present.  :thumbsup:
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

stangzilla

Re: Pulled the Python Trigger
« Reply #22 on: January 10, 2018, 02:16:27 PM »
Did you fondle, uh I mean hold one?  :love:

I would hope the quality of the past would still be present.  :thumbsup:

of course I fondled it, stroked it, turned the cylinder and checked the lockup, pulled the trigger (checked that it was unloaded of course), and held it with both hands.
then they took it away from me bc I was getting carried away. 
actually I did better than that.....I bought one!   :geekdanc:

Inspector

Re: Pulled the Python Trigger
« Reply #23 on: January 10, 2018, 02:55:44 PM »
of course I fondled it, stroked it, turned the cylinder and checked the lockup, pulled the trigger (checked that it was unloaded of course), and held it with both hands.
then they took it away from me bc I was getting carried away. 
actually I did better than that.....I bought one!   :geekdanc:
Oh man that is VERY COOL!!!  :worship:

How is the trigger?  ???

You HAVE to do a comprehensive range report.  :thumbsup:
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

stangzilla

Re: Pulled the Python Trigger
« Reply #24 on: January 10, 2018, 03:08:43 PM »
trigger felt smooth in DA, in SA it felt pretty light.  I really like the trigger, from only doing a few dry fires.
I like the grip although it may be a bit large for a pocket carry, but I'm not worried about that living in Hawaii
the cylinder release may take some getting used to, but no big deal.
this is my first Colt anything so I'm kind of exited to see how it shoots
i'll do a range report after I pick it up and shoot it maybe in a few weeks.   :thumbsup:

Flapp_Jackson

Re: Pulled the Python Trigger
« Reply #25 on: January 10, 2018, 03:28:51 PM »
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

Flapp_Jackson

Re: Pulled the Python Trigger
« Reply #26 on: January 10, 2018, 03:36:56 PM »
I learned something from this video I didn't know or never paid attention to:

S&W revolvers' cylinders revolve counter-clockwise. 

Colt revolvers revolve clockwise.

 :thumbsup:

« Last Edit: January 10, 2018, 03:47:50 PM by Flapp_Jackson »
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

Inspector

Re: Pulled the Python Trigger
« Reply #27 on: January 10, 2018, 03:51:20 PM »
I learned something from this video I didn't know or never paid attention to:

S&W revolvers' cylinders revolve counter-clockwise. 

Colt revolvers revolve clockwise.

 :thumbsup:


So which way do Rugers revolve?  :geekdanc:
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

Flapp_Jackson

Re: Pulled the Python Trigger
« Reply #28 on: January 10, 2018, 04:12:10 PM »
So which way do Rugers revolve?  :geekdanc:

Mine goes counter-clockwise.

(Way to make me go look at mine in the safe!!  :wave: )
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

Inspector

Re: Pulled the Python Trigger
« Reply #29 on: January 10, 2018, 04:17:14 PM »
Mine goes counter-clockwise.

(Way to make me go look at mine in the safe!!  :wave: )
One more, do you know how to tell which direction a cylinder turns on a revolver just by looking at it (Not even touching it or manipulating it)?
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

Flapp_Jackson

Re: Pulled the Python Trigger
« Reply #30 on: January 10, 2018, 04:21:02 PM »
One more, do you know how to tell which direction a cylinder turns on a revolver just by looking at it (Not even touching it or manipulating it)?
Yes.  The notches on the outside of the cylinder.  It's cut to "point" in the direction it turns, then locks up the chamber with the flat edge of the notch.
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

stangzilla

Re: Pulled the Python Trigger
« Reply #31 on: January 10, 2018, 05:11:31 PM »
So which way do Rugers revolve?  :geekdanc:


Rugers revolve the correct way.   :thumbsup:

Flapp_Jackson

Re: Pulled the Python Trigger
« Reply #32 on: January 10, 2018, 05:15:06 PM »

Rugers revolve the correct way.   :thumbsup:

In Australia, Rugers revolve clockwise.   :geekdanc:
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

drck1000

Re: Pulled the Python Trigger
« Reply #33 on: January 10, 2018, 05:25:11 PM »
of course I fondled it, stroked it, turned the cylinder and checked the lockup, pulled the trigger (checked that it was unloaded of course), and held it with both hands.
then they took it away from me bc I was getting carried away. 
actually I did better than that.....I bought one!   :geekdanc:
Awesome! Looks like a nice pistol. I looked it up online and I have to admit, I’m interested.

drck1000

Re: Pulled the Python Trigger
« Reply #34 on: January 10, 2018, 05:27:49 PM »
One more, do you know how to tell which direction a cylinder turns on a revolver just by looking at it (Not even touching it or manipulating it)?
By asking you or Stang... ;D

oldfart

Re: Pulled the Python Trigger
« Reply #35 on: January 11, 2018, 06:05:51 AM »
Y'all know this was from 2 years ago
What, Me Worry?

Inspector

Re: Pulled the Python Trigger
« Reply #36 on: January 11, 2018, 06:38:28 AM »
Yes.  The notches on the outside of the cylinder.  It's cut to "point" in the direction it turns, then locks up the chamber with the flat edge of the notch.
Nice!  :thumbsup:

Not everyone knows that.
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

Inspector

Re: Pulled the Python Trigger
« Reply #37 on: January 11, 2018, 06:40:10 AM »
By asking you or Stang... ;D
I have to ask Stang. He's the real expert here.  :thumbsup:
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

Inspector

Re: Pulled the Python Trigger
« Reply #38 on: January 11, 2018, 06:40:59 AM »
Y'all know this was from 2 years ago
:P :P :P
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

stangzilla

Re: Pulled the Python Trigger
« Reply #39 on: January 11, 2018, 08:37:58 AM »
I have to ask Stang. He's the real expert here.  :thumbsup:

No, you're the expert.  :worship:
I'm just a Dirty Harry wannabe