2aHawaii

General Topics => General Discussion => Topic started by: 6716J on March 09, 2022, 11:07:01 AM

Title: hOmEmAdE mAChInE gUnS
Post by: 6716J on March 09, 2022, 11:07:01 AM
Good to know the AFT and the Lame Stream Media are out there spreading manure everywhere. They make it seem as though the "guns" are the problem. Even though the article does say the items made are illegal and done by criminals (who don't follow laws anyways)

https://abc13.com/houston-crime-ghost-guns-atf-training-used-in/11633731/

Sent from my SM-G781U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 11:43:39 AM
I may have heard a story of a guy who ordered airsoft switches via wish.com.  AFT showed up at his door asking for the X amount of switched he purchased. Told him give them to us or we will arrest and go to trial. Surrender them and that's the end of it. Just don't order more.  1 was installed in his airsoft, the rest were still in the box.  He surrendered all to them and they left.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 09, 2022, 11:54:31 AM
I may have heard a story of a guy who ordered airsoft switches via wish.com.  AFT showed up at his door asking for the X amount of switched he purchased. Told him give them to us or we will arrest and go to trial. Surrender them and that's the end of it. Just don't order more.  1 was installed in his airsoft, the rest were still in the box.  He surrendered all to them and they left.

If the airsoft version is not compatible with the real firearm version, I would have told the ATF to pound sand.  Since they didn't arrest him, it goes to the legality of the item and his actions.

My daughter fought a traffic ticket, and the prosecutor tried every lie, threat and trick he could think of to get a conviction before she testified.  The ticket was thrown out even though the issuing officer testified.

Don't trust ANYTHING someone in law enforcement or the justice system tells you if they are on the opposing side.  Have a lawyer's number/card handy, and tell them to contact that office if they have any more questions.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 12:11:04 PM

My daughter fought a traffic ticket, and the prosecutor tried every lie, threat and trick he could think of to get a conviction before she testified.  The ticket was thrown out even though the issuing officer testified.


What did they lie about?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 12:13:24 PM
The increased ease of getting a firearm through automated machining and printing does worry me, it definitely makes obtaining a firearm by a prohibited person easier. I think we shouldn't ignore that aspect of this issue.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 09, 2022, 12:16:58 PM
The increased ease of getting a firearm through automated machining and printing does worry me, it definitely makes obtaining a firearm by a prohibited person easier. I think we shouldn't ignore that aspect of this issue.

The issue is that people make irrational judgementa on what it really takes to produce a functioning firearm.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 12:27:05 PM
The increased ease of getting a firearm through automated machining and printing does worry me, it definitely makes obtaining a firearm by a prohibited person easier. I think we shouldn't ignore that aspect of this issue.

Or maybe we should keep career felons behind bars. Find the $ in the budget for it.

You're statement reminds me of what Major Neilson testified to when HPD was for the "ghost gun" bill. Someone mentioned the cost to make a P80 was about $600 vs. the cost to buy a factory gun from the blackmarket at $200ish.  Major Neilson stated it actually cost HPD $800 to make the "ghost gun". So someone in HPD got a free P80 with premium parts courtesy of John Q tax payer.

Actually a prohibited person making 3D printing one can work out in the favor of the people because unless they really know what they're doing, the gun is not reliable. As seen in the Lucky Strike shooting, the gun jammed after the 1st shot.  I've seen P80s jam way more often at the range compared to factory guns (non modified).  And someone who really does know how to build a P80 or 3D printed gun, will be able to do so whether laws are passed banning them or not.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 12:27:48 PM
If the airsoft version is not compatible with the real firearm version, I would have told the ATF to pound sand.  Since they didn't arrest him, it goes to the legality of the item and his actions.



They were at his door because the are compatible.  They also wanted every one he bought, if 1 was "missing" to the jail he goes.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 12:34:25 PM
The issue is that people make irrational judgementa on what it really takes to produce a functioning firearm.

Not really though. I am sure there are people with an unsubstantiated fear that people can just push a button then out pops a fully functional firearm however I would argue that "ghost guns" and the ability to manufacture certain parts easily make it much easier to come by a completed firearm for illegal use.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 12:43:25 PM
Or maybe we should keep career felons behind bars. Find the $ in the budget for it.

You're statement reminds me of what Major Neilson testified to when HPD was for the "ghost gun" bill. Someone mentioned the cost to make a P80 was about $600 vs. the cost to buy a factory gun from the blackmarket at $200ish.  Major Neilson stated it actually cost HPD $800 to make the "ghost gun". So someone in HPD got a free P80 with premium parts courtesy of John Q tax payer.

Actually a prohibited person making 3D printing one can work out in the favor of the people because unless they really know what they're doing, the gun is not reliable. As seen in the Lucky Strike shooting, the gun jammed after the 1st shot.  I've seen P80s jam way more often at the range compared to factory guns (non modified).  And someone who really does know how to build a P80 or 3D printed gun, will be able to do so whether laws are passed banning them or not.

If you analyze the dollar amount then you could make the argument that the black market firearm is easier to get but I was looking at it a different way. If I order a ghost gun receiver and order the other parts I can get them readily and finish them relatively easily whereas the black market involves more risks and complications. I need to first know a guy who can get me one. That guy has to get the firearm, which has probably been stolen by him or someone else in a burglary, robbery etc. So along that path the people involved can be robbed themselves, they could be caught by cops, they could be arrested in a sting operation, I might get the gun but later be ratted out to the cops. To me, if I were trying to get a gun for crimes, even if the ghost gun is going to cost me more I would opt for the ghost gun type because now I avoid all those risks associated with getting a black market one.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 09, 2022, 12:46:10 PM
What did they lie about?

Prosecutor:  "The officer is here and ready to testify.  He used a laser, which is very reliable.  If you don't plead guilty, we'll be seeking the maximum fine, which is $450."

The fine stated on the ticket was $265, not $450.

Prosecutor, after she said she's still fighting it, "We're going to call all the other cases before yours, so you might not even be heard today.  That's means you'll have to come back again."

It was 10:15AM.  Given the number of cases being actually disputed, there was no way that was going to happen.  As it turns out, he was off by about 5-6 hours!

Prosecutor @10.30 as court reconvenes after the break: HE CALLS MY DAUGHTER'S CASE FIRST!  As she starts toward the bench, the prosecutor "corrected himself," and told her to be seated.  He then called another case.

Prosecutor @11:00 comes over and says they will be breaking for lunch at 11:30.  He said she'd be called long after lunch is over.  HE SUGGESTED WE GO GET LUNCH and be back about 1:00.  When court reconvened after that short break, HE AGAIN CALLED MY DAUGHTER'S CASE FIRST!  He looked shocked that she approached, expecting we'd taken his "advice" and gone to lunch.

As soon as the prosecutor "corrected himself" again and called a different case, the judge smiled.  He obviously knew what the prosecutor was doing -- trying to rattle my daughter and/or get a summary judgement if she wasn't present when called.

The third time he called her case, it was barely past 11:45 -- not even lunch yet.  She testified after the Cop.  The prosecutor spent most of his time reading a traffic stop "script" that got all of the required facts on the record:  who, what, when, how, radar/laser used, qualification training on the device, calibration date, environmental factors at the stop, etc, etc.  He basically went down a laundry list of questions to which the Cop supplied the answers.  Then my daughter questioned the Cop.  She got the answers she needed.   :thumbsup:

The prosecutor in his final arguments made a couple of lame comments that had nothing to do with her defense, which is what we'd hoped for.  She'd asked "semi-irrelevant" questions about the stop just to throw the prosecutor off.

The case was dismissed.  As soon as the judge said the prosecution had failed to meet its burden, the prosecutor's jaw dropped to the table!  It was priceless!

Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 12:49:41 PM
Prosecutor:  "The officer is here and ready to testify.  He used a laser, which is very reliable.  If you don't plead guilty, we'll be seeking the maximum fine, which is $450."

The fine stated on the ticket was $265, not $450.

Prosecutor, after she said she's still fighting it, "We're going to call all the other cases before yours, so you might not even be heard today.  That's means you'll have to come back again."

It was 10:15AM.  Given the number of cases being actually disputed, there was no way that was going to happen.  As it turns out, he was off by about 5-6 hours!

Prosecutor @10.30 as court reconvenes after the break: HE CALLS MY DAUGHTER'S CASE FIRST!  As she starts toward the bench, the prosecutor "corrected himself," and told her to be seated.  He then called another case.

Prosecutor @11:00 comes over and says they will be breaking for lunch at 11:30.  He said she'd be called long after lunch is over.  HE SUGGESTED WE GO GET LUNCH and be back about 1:00.  When court reconvened after that short break, HE AGAIN CALLED MY DAUGHTER'S CASE FIRST!  He looked shocked that she approached, expecting we'd taken his "advice" and gone to lunch.

As soon as the prosecutor "corrected himself" again and called a different case, the judge smiled.  He obviously knew what the prosecutor was doing -- trying to rattle my daughter and/or get a summary judgement if she wasn't present when called.

The third time he called her case, it was barely past 11:45 -- not even lunch yet.  She testified after the Cop.  The prosecutor spent most of his time reading a traffic stop "script" that got all of the required facts on the record:  who, what, when, how, radar/laser used, qualification training on the device, calibration date, environmental factors at the stop, etc, etc.  He basically went down a laundry list of questions to which the Cop supplied the answers.  Then my daughter questioned the Cop.  She got the answers she needed.   :thumbsup:

The prosecutor did his final arguments made a couple of lame comments that had nothing to do with her defense, which is what we'd hoped for.  She'd asked "semi-irrelevant" questions about the stop just to throw the prosecutor off.

The case was dismissed.  As soon as the judge said the prosecution had failed to meet its burden, the prosecutor's jaw dropped to the table!  It was priceless!

Interesting. I think they want the easy wins.

Was she contesting that she was speeding or was it another thing? (Don't have to answer of course, just curious)
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 09, 2022, 12:59:23 PM
Not really though. I am sure there are people with an unsubstantiated fear that people can just push a button then out pops a fully functional firearm however I would argue that "ghost guns" and the ability to manufacture certain parts easily make it much easier to come by a completed firearm for illegal use.

Again. Fear. They have no idea what it takes to make certain parts. "Push a button"? that's cute. No clue.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 09, 2022, 01:05:06 PM
Interesting. I think they want the easy wins.

Was she contesting that she was speeding or was it another thing? (Don't have to answer of course, just curious)

She said she was not speeding, and that he pulled her over after he lasered a different car.

He had printed on the ticket the wrong location for the stop.  The place he stopped her was about 2 miles before the place he documented AND TESTIFIED ABOUT.  There were major differences in the locations, including construction about where he was sitting -- a road crew was removing rocks that fell onto the H2 northbound just after the H1-H2 exit.  Cars were speeding up after clearing the construction and moving around her, making it impossible for her to get out of the left lane.  The big fact that she got from the Cop was that, at night, he can't see the front license plate of the cars he lasers.  Also, the street lights there were out due to copper thieves, making identifying a car that much harder.

Basically, everything he testified about -- weather, road conditions, traffic conditions, lighting, etc. -- was now in question because he relied on the location he wrote on the ticket.  My daughter had him mark a Google Maps printout showing where he stopped her, just so there was no question about where he was describing.  Then she presented her own copy of the map she'd marked beforehand showing where she was actually stopped.  That gave a good visual of just how far apart the two spots were.

The judge said, while he didn't believe the Cop willfully lied, he did think the officer may have confused this stop with another, especially after another of my daughter's questions got the fact he'd written over 50 tickets that shift on the record.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 09, 2022, 01:07:50 PM
Interesting. I think they want the easy wins.

Was she contesting that she was speeding or was it another thing? (Don't have to answer of course, just curious)

Easy or not, he just wanted the win without bothering to hear my daughter's side of the traffic stop.

He played dirty.  Had we trusted him and gone to lunch, he would have won by default.  That's how our government employees operate.  It's not about the truth.  It's about winning.  Period.  The public they supposedly work for get screwed in the process, and they could not care less.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 01:11:54 PM
Again. Fear. They have no idea what it takes to make certain parts. "Push a button"? that's cute. No clue.

Clearly I am not talking about those people who fear based on ignorance. You act as if all people who would worry are somehow ignorant.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 09, 2022, 01:13:09 PM
Easy or not, he just wanted the win without bothering to hear my daughter's side of the traffic stop.

He played dirty.  Had we trusted him and gone to lunch, he would have won by default.  That's how our government employees operate.  It's not about the truth.  It's about winning.  Period.  The public they supposedly work for get screwed in the process, and they could not care less.

I have heard that some judges really don't take crap from attorneys and will toss their cases when they act like this even if it were a winnable case
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 09, 2022, 01:19:51 PM
They were at his door because the are compatible.  They also wanted every one he bought, if 1 was "missing" to the jail he goes.

Really?  It was always my understanding that the ATF requires airsoft gun makers design them in a way that prevents fire control components from real guns from working in them.  That way, someone can't convert an airsoft gun from airsoft to actual firearm by swapping some of the parts out.

So, if the parts in question are cross-compatible between airsoft and "real" Glocks, the ATF should not be going after the buyers, but the airsoft company or distributors.

That's probably why they didn't arrest him.  They had no evidence he intended to convert, or sell to others wanting to convert, a real Glock to full auto.

Where did you see the parts are cross-compatible?  Was that in an article?  The linked article doesn't use the word "airsoft" at all.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 09, 2022, 01:48:46 PM
Clearly I am not talking about those people who fear based on ignorance. You act as if all people who would worry are somehow ignorant.

I'm not acting. I did not say all people who worry are ignorant. Making a firearm is more involved than what you described. Someone needs to have the knowledge and skill to operate the automated machinery. A DIY firearm like a :ghost gun" will cost more than one produced by a factory.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 01:49:17 PM
If you analyze the dollar amount then you could make the argument that the black market firearm is easier to get but I was looking at it a different way. If I order a ghost gun receiver and order the other parts I can get them readily and finish them relatively easily whereas the black market involves more risks and complications. I need to first know a guy who can get me one. That guy has to get the firearm, which has probably been stolen by him or someone else in a burglary, robbery etc. So along that path the people involved can be robbed themselves, they could be caught by cops, they could be arrested in a sting operation, I might get the gun but later be ratted out to the cops. To me, if I were trying to get a gun for crimes, even if the ghost gun is going to cost me more I would opt for the ghost gun type because now I avoid all those risks associated with getting a black market one.

You're thinking like someone who is trying to remain a law abiding citizen. Think like a criminal. Why would 1 spend $800 plus time, effort and tools for a gun they may have to toss in the bushes when being chased by cops.  When they could spend $200 and toss it with less financial worry.  Then add in that factory guns are usually more reliable. 

Now say the criminal doesn't make it himself and saves on the time and effort, as HPD stated it cost them $800. Which means if someone else is making it, there will be a mark up. So a $800 gun will now cost probably $1400 because why go thru such risk for a $100 per gun profit if it's sold at $900.  Same reason why a gun that killed someone cost way less than a gun that didn't on the black market. VICE had a docu about these types of clean vs. murder guns. Basically, murder guns cost less than $100.

Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 01:54:23 PM
Really?  It was always my understanding that the ATF requires airsoft gun makers design them in a way that prevents fire control components from real guns from working in them.  That way, someone can't convert an airsoft gun from airsoft to actual firearm by swapping some of the parts out.

So, if the parts in question are cross-compatible between airsoft and "real" Glocks, the ATF should not be going after the buyers, but the airsoft company or distributors.

That's probably why they didn't arrest him.  They had no evidence he intended to convert, or sell to others wanting to convert, a real Glock to full auto.

Where did you see the parts are cross-compatible?  Was that in an article?  The linked article doesn't use the word "airsoft" at all.

I'm sure they went after the maker because they had a list of who purchased them and in how much quantity.  I didn't ask about what his intent was or what the online posting said. As that is none of my business.

It could have been another "picture hanger" situation from Wish.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 09, 2022, 02:06:33 PM
I'm sure they went after the maker because they had a list of who purchased them and in how much quantity.  I didn't ask about what his intent was or what the online posting said. As that is none of my business.

It could have been another "picture hanger" situation from Wish.

You're talking about the maker of the part.

I'm talking about the maker of the airsoft gun that (supposedly) allows their product to accept parts that transform real Glocks to full-auto.

If the part works in a real Glock, it should NOT be sold for, or even work in, airsoft guns, too. 
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 02:14:25 PM
You're talking about the maker of the part.

I'm talking about the maker of the airsoft gun that (supposedly) allows their product to accept parts that transform real Glocks to full-auto.

If the part works in a real Glock, it should NOT be sold for, or even work in, airsoft guns, too.

I understand. That info IDK about the brand of airsoft he had it installed on.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 09, 2022, 02:21:03 PM
the article did not explain the whole process to print a part. The settings and the material to print with are CRUCIAL pieces of information to produce a viable part of ANYTHING. If a user doesn't have the knowledge or experience all the user will have is a blob of molten plastic.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Brystont1 on March 09, 2022, 02:54:43 PM
The increased ease of getting a firearm through automated machining and printing does worry me, it definitely makes obtaining a firearm by a prohibited person easier. I think we shouldn't ignore that aspect of this issue.

There should be no such thing as a “prohibited person” in the first place. You are either trusted to be in society or not. The 2nd amendment says “right if the people” not “the right of whoever the government deems appropriate”.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: 6716J on March 09, 2022, 02:58:40 PM
the article did not explain the whole process to print a part. The settings and the material to print with are CRUCIAL pieces of information to produce a viable part of ANYTHING. If a user doesn't have the knowledge or experience all the user will have is a blob of molten plastic.

That's irrelevant to the intended audience. It's fear mongering to make everything firearm related illegal.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 09, 2022, 04:53:47 PM
the article did not explain the whole process to print a part. The settings and the material to print with are CRUCIAL pieces of information to produce a viable part of ANYTHING. If a user doesn't have the knowledge or experience all the user will have is a blob of molten plastic.
Theyre trying to make like all u do is double click the file and hit print. Do we expect anything less from anti gunners/government?

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: RSN172 on March 09, 2022, 05:44:14 PM
You can easily download instructions on how to make a machine gun from scratch on the internet.   Not going be accurate because you will be shooting out of a plain steel tube, but going be full auto.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 14, 2022, 02:48:29 PM
I'm not acting. I did not say all people who worry are ignorant. Making a firearm is more involved than what you described. Someone needs to have the knowledge and skill to operate the automated machinery. A DIY firearm like a :ghost gun" will cost more than one produced by a factory.

This is all true but like I pointed out there are other reasons to still be concerned about ghost guns.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 14, 2022, 02:54:19 PM
You're thinking like someone who is trying to remain a law abiding citizen. Think like a criminal. Why would 1 spend $800 plus time, effort and tools for a gun they may have to toss in the bushes when being chased by cops.  When they could spend $200 and toss it with less financial worry.  Then add in that factory guns are usually more reliable. 

Now say the criminal doesn't make it himself and saves on the time and effort, as HPD stated it cost them $800. Which means if someone else is making it, there will be a mark up. So a $800 gun will now cost probably $1400 because why go thru such risk for a $100 per gun profit if it's sold at $900.  Same reason why a gun that killed someone cost way less than a gun that didn't on the black market. VICE had a docu about these types of clean vs. murder guns. Basically, murder guns cost less than $100.

I disagree. The likelihood of being caught is a significant factor in the minds of criminals. If I can spend a little more and reduce the risk of getting caught I would take it.

I rather doubt criminals are that concerned with reliability of the firearms they get.

I think that murder guns have a low price because no one wants to be carrying one that could be associated with a murder weapon. Low demand = lower price. I think this proves my earlier point, the additional price is worth the reduced risk of being caught.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 14, 2022, 02:55:21 PM
There should be no such thing as a “prohibited person” in the first place. You are either trusted to be in society or not. The 2nd amendment says “right if the people” not “the right of whoever the government deems appropriate”.

So people locked up in jails should be allowed to have firearms? (Or do you not qualify them as people while imprisoned?)
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 14, 2022, 03:19:02 PM
This is all true but like I pointed out there are other reasons to still be concerned about ghost guns.

What other reasons?


I disagree. The likelihood of being caught is a significant factor in the minds of criminals. If I can spend a little more and reduce the risk of getting caught I would take it.

I rather doubt criminals are that concerned with reliability of the firearms they get.

I think that murder guns have a low price because no one wants to be carrying one that could be associated with a murder weapon. Low demand = lower price. I think this proves my earlier point, the additional price is worth the reduced risk of being caught.

What's a "murder gun"?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 14, 2022, 05:12:21 PM
This is all true but like I pointed out there are other reasons to still be concerned about ghost guns.

Concerned how?

Does a ghost gun kill more people than a stolen, legally purchased, or gifted firearm?

Are the people getting or making ghost guns without the means to obtain guns otherwise?

Are other avenues of obtaining guns that much more difficult than getting a ghost gun?

If the government (Hawaii) didn't require full registration for all guns upon transfer, would laws against ghost guns even be enforceable?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Brystont1 on March 15, 2022, 08:43:20 AM
So people locked up in jails should be allowed to have firearms? (Or do you not qualify them as people while imprisoned?)

Prisoners do not have full rights.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: hvybarrels on March 15, 2022, 08:56:32 AM
Prisoners do not have full rights.

You don't have to answer. He's obviously frustrated that anyone who's not a cop still has gun rights, is not making any progress trying to convince us to give them up, and has resorted to just being silly.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 15, 2022, 09:02:47 AM
Prisoners do not have full rights.

And to add, can a prisoner vote or have the 4th amendment (shake downs).  Or how about the 1a and protest when ever they please. Rhetorical of course.

Side note, a HI guy indited for being a felon and having ammo. No charge for his "ghost gun" or AR15 "parts".  Yet AG Connors feels the need to mention ghost guns, even though no charges filed for that and being a felon.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 15, 2022, 01:54:35 PM
What other reasons?

I already gave those reasons. It is an additional avenue to obtain a firearm by people who would otherwise have more difficulty in obtaining a firearm.


Quote
What's a "murder gun"?

Ask CMO
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 15, 2022, 01:55:26 PM
Concerned how?

Does a ghost gun kill more people than a stolen, legally purchased, or gifted firearm?

Are the people getting or making ghost guns without the means to obtain guns otherwise?

Are other avenues of obtaining guns that much more difficult than getting a ghost gun?

If the government (Hawaii) didn't require full registration for all guns upon transfer, would laws against ghost guns even be enforceable?

I would argue that making a ghost gun is quite a bit easier than getting a black market gun.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 15, 2022, 01:58:50 PM
Prisoners do not have full rights.

So are you of the position that once someone is released from prison that they should have full rights restored, including the right to own firearms, vote, etc?

Plus, there are many other examples where individuals can have rights restricted without actually being in prison including age, nationality, mental faculties, etc.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 15, 2022, 02:08:29 PM
I would argue that making a ghost gun is quite a bit easier than getting a black market gun.

It all depends on if the person is good with their hands or not. Like if someone can wood craft mediocrally (IDK if this is a word)  at a minimum, then they should have no issue making a P80 and have it function correctly.

This is the reason why I never attempted to make a P80, even though legal at the time, because I'm not good with my hands. The most I can do is change my oil and car battery. Everything else is above my pay grade.  So if I were to make 1, it would most likely jam often or come out lop sided.

So I agree that to you, making a P80 is easier than getting a black market gun, especially since someone you would be buying it from knows what you do for a living and probably won't sell you a black market gun.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 15, 2022, 02:17:54 PM
So are you of the position that once someone is released from prison that they should have full rights restored, including the right to own firearms, vote, etc?

Plus, there are many other examples where individuals can have rights restricted without actually being in prison including age, nationality, mental faculties, etc.

Many of the restrictions you mention have clear situations. Like not being able to vote till age 18 for all.  Or signing legal documents.  For nationality, again, across the board, but our laws do state permanent resident, so 1 can be of English nationality/citizenship, but still own guns.  People here on temp visa's are across the board denied. Mental faculties all depend on what state you're in, HI loves to deny these people, but other states are OK.  Which if you told someone who needs mental help they would also loose all their guns, then they would refuse said help. So double edged sword.  Which is why non anti-2a reasonable accommodations need to be made.

If you break the law and paid your debt, then rights should be restored.  IIRC there was a bill for this. Something like 10 years no convictions. The bigger issue is the prison system here doesn't work. How do I know this, 70% reincarnation rate.  So how do you get rights back if what you were sent in prison for (rehabilitation) doesn't work for majority of the criminals?  Which is why I said "should" in my statement.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 15, 2022, 02:19:17 PM
I already gave those reasons. It is an additional avenue to obtain a firearm by people who would otherwise have more difficulty in obtaining a firearm.


Ask CMO

A gun that was used in a murder, which according to VICE sells for cheaper.  Because if you're caught with it, you will be the one charged for murder.   But realistically, how does 1 know?  I mean honor system of the illegal seller?  Honor amongst thieves.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 15, 2022, 02:26:46 PM
A gun that was used in a murder, which according to VICE sells for cheaper.  Because if you're caught with it, you will be the one charged for murder.   But realistically, how does 1 know?  I mean honor system of the illegal seller?  Honor amongst thieves.

It would be interesting to see an economic study about something like this.

I can only assume that someone selling black market guns needs to have earned trust of his customers and part of that would be honesty over something like a murder weapon.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 15, 2022, 02:29:48 PM
It all depends on if the person is good with their hands or not. Like if someone can wood craft mediocrally (IDK if this is a word)  at a minimum, then they should have no issue making a P80 and have it function correctly.

This is the reason why I never attempted to make a P80, even though legal at the time, because I'm not good with my hands. The most I can do is change my oil and car battery. Everything else is above my pay grade.  So if I were to make 1, it would most likely jam often or come out lop sided.

So I agree that to you, making a P80 is easier than getting a black market gun, especially since someone you would be buying it from knows what you do for a living and probably won't sell you a black market gun.

So do you know people in the black market, you have a source for getting a black market gun if you wanted? Personally I don't so a P80 would be just that much easier.

I have seen some P80 assembly videos, it really isn't that complicated. And heck, if I wanted to sell them on the black market I could churn them out much safer than buying/stealing stolen firearms and reselling them.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 15, 2022, 02:30:29 PM
P80s are not machine guns
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 15, 2022, 02:33:02 PM
Many of the restrictions you mention have clear situations. Like not being able to vote till age 18 for all.  Or signing legal documents.  For nationality, again, across the board, but our laws do state permanent resident, so 1 can be of English nationality/citizenship, but still own guns.  People here on temp visa's are across the board denied. Mental faculties all depend on what state you're in, HI loves to deny these people, but other states are OK.  Which if you told someone who needs mental help they would also loose all their guns, then they would refuse said help. So double edged sword.  Which is why non anti-2a reasonable accommodations need to be made.

If you break the law and paid your debt, then rights should be restored.  IIRC there was a bill for this. Something like 10 years no convictions. The bigger issue is the prison system here doesn't work. How do I know this, 70% reincarnation rate.  So how do you get rights back if what you were sent in prison for (rehabilitation) doesn't work for majority of the criminals?  Which is why I said "should" in my statement.

I am not disagreeing with your first point at all, just pointing out that many of our rights have limits. We don't all agree on where the limits should be drawn of course but "prohibited persons" exist all over the place.

I do agree that there needs to be a better system at restoring peoples rights after they have served their time for their crime.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 15, 2022, 02:36:39 PM
I would argue that making a ghost gun is quite a bit easier than getting a black market gun.
If you rent an apartment or live with a friend, and you don't have any tools needed to compete an 80% receiver, completing the gun will be more difficult.

If you have zero experience building ARs, and you aren't mechanically inclined, it's a daunting task to build something you will hold next to your face, hoping it doesn't explode when fired.

In fact, there are 100 different ways one can muck up the assembly of an AR even without including the milling process.  Misaligned gas parts, springs missing from detents, head spacing problems, buying the wrong components (Trying to fit MILSPEC and Commercial parts together), and so forth.

Expecting the average person to build a "ghost gun" their first time without critical mistakes is irrational. 

And, before you say, "They probably have a friend to help," you're now making it JUST AS COMPLICATED as having an acquaintance on the black market who can sell you a gun that's already assembled at the factory.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 15, 2022, 02:43:27 PM
So are you of the position that once someone is released from prison that they should have full rights restored, including the right to own firearms, vote, etc?

Plus, there are many other examples where individuals can have rights restricted without actually being in prison including age, nationality, mental faculties, etc.

You didn't reply to me, but since we've already debated this before, I thought I'd reiterate.

If someone is convicted of a crime other than one of violence, even a felony, I think once they have completed their sentence, their rights -- ALL OF THEIR RIGHTS -- should be restored.

Armed robbery, domestic abuse, and other violent crimes may offer a path to full restoration of rights if completed, such as probation, educational classes, and the like.

I think if someone is convicted of drug possession or auto theft, taking away 2nd Amendment rights is more punitive  than preventative.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 16, 2022, 09:08:36 AM
Expecting the average person to build a "ghost gun" their first time without critical mistakes is irrational. 



No less rational than thinking an average person has black market contacts.

Obviously different people have different skillsets, for some maybe a black market gun is easier, for others a ghost gun is easier. My whole point is that ghost guns provide an additional avenue by where someone could obtain a firearm unlawfully.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 16, 2022, 09:10:46 AM
You didn't reply to me, but since we've already debated this before, I thought I'd reiterate.

If someone is convicted of a crime other than one of violence, even a felony, I think once they have completed their sentence, their rights -- ALL OF THEIR RIGHTS -- should be restored.

Armed robbery, domestic abuse, and other violent crimes may offer a path to full restoration of rights if completed, such as probation, educational classes, and the like.

I think if someone is convicted of drug possession or auto theft, taking away 2nd Amendment rights is more punitive  than preventative.

I would mostly agree here.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 16, 2022, 09:15:26 AM
So do you know people in the black market, you have a source for getting a black market gun if you wanted? Personally I don't so a P80 would be just that much easier.

I have seen some P80 assembly videos, it really isn't that complicated. And heck, if I wanted to sell them on the black market I could churn them out much safer than buying/stealing stolen firearms and reselling them.

I have never inquired to buy a gun illegally, so no I do not have a source.  Also I have never purchased or inquired to purchase a P80 either. So same same.  Like I stated, it cost HPD $800 to make 1 gun (testimony given by Major Nielson). Now assume they would sell it for a profit to criminals, the mark up would definitely be for sale about $1500.  Because if someone is making and then selling guns illegally, a $100 mark up isn't worth the risk. Then add in the time you need to spend on each gun and initial start up for tools needed.  Which you may already own, but let's assume you don't.  Would a criminal spend $1500 on a P80 knowig they will have to toss it in the bushes if being chased by HPD, or spend $400 (higher than $200), 

Lets assume a criminal would make a P80 instead of buying one already made, at minimum about $800, plus time and effort/labor. So would they do that or buy one for $400 and can just toss it if being chased.

Again, you are thinking like a law abiding citizen who is trying to maintain a clean record.  Think like an illegal arms dealer who doesn't care, but wants to make a quick and easy buck.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 16, 2022, 09:19:13 AM
No less rational than thinking an average person has black market contacts.

Obviously different people have different skillsets, for some maybe a black market gun is easier, for others a ghost gun is easier. My whole point is that ghost guns provide an additional avenue by where someone could obtain a firearm unlawfully.

When you say ghost guns, do you mean P80s and like guns or guns with the serial numbers altered/removed?  Because our state defines both alike. So when the news says "ghost gun", unless they specify, it's unknown if its 1 or the other.  The HI guy serving 3 years for ammo possession as a felon in 2017 just sentenced had a "ghost gun". But yet he was only charged for ammo possession and not firearm possession/ghost gun, which carries a 5 year per gun.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 16, 2022, 09:37:38 AM
I have never inquired to buy a gun illegally, so no I do not have a source.  Also I have never purchased or inquired to purchase a P80 either. So same same.  Like I stated, it cost HPD $800 to make 1 gun (testimony given by Major Nielson). Now assume they would sell it for a profit to criminals, the mark up would definitely be for sale about $1500.  Because if someone is making and then selling guns illegally, a $100 mark up isn't worth the risk. Then add in the time you need to spend on each gun and initial start up for tools needed.  Which you may already own, but let's assume you don't.  Would a criminal spend $1500 on a P80 knowig they will have to toss it in the bushes if being chased by HPD, or spend $400 (higher than $200), 

Lets assume a criminal would make a P80 instead of buying one already made, at minimum about $800, plus time and effort/labor. So would they do that or buy one for $400 and can just toss it if being chased.

Again, you are thinking like a law abiding citizen who is trying to maintain a clean record.  Think like an illegal arms dealer who doesn't care, but wants to make a quick and easy buck.

He only know how to think like EEF.  All of his hypotheticals are from his perspective, and the logic he uses is that of a keyboard commando.

If you read enough fiction books where the authors actually did their research, follow the studies on criminals and guns, and look at some actual documented cases of how guns were obtained, you really don't have to "know people in the black market" (racist?  O0 ).

80% of of people who were arrested and convicted of crimes while in possession of a firearm say the obtained them from friends, family members or "associates".  Associates can be other members of their gang, members of gangs they happen to know, people who were "recommended" by their friends, etc.  Basically, the "black market" is not some stranger selling guns out of his basement or trunk of his car parked in some alley.

Criminals know the ATF and other LE agencies do stings, and if the buyer were to trust a seller on Craig's List or FB, he's taking a huge risk of getting arrested before he's even attempted to use the gun.  Instead, they look for anyone in their immediate circle that can get a gun.  Failing that, they ask those in their immediate circle if they know where they can get one.  The closer to themselves the source is, the more they can trust it's not a sting or someone who will turn them in for attempting to illegally buy a firearm.

Most people don't associate with people who regularly deal in black market guns, so they have to rely on their acquaintances to steer them to someone.

EEF is more of a DIYer.  If he can't figure out how to get a "clean" gun and avoid the proper, legal process without help, he's less likely to try finding a "source" he can trust.

At the very least, he's making a false assumption that if he doesn't already know "people in the black market," that finding someone willing and able to sell him a gun is somehow more difficult than making a working firearm you can trust to work when needed.

I think going to a shady seller has more inherent risk than producing a gun yourself if you have no one to vouch for the seller.  So, in that narrow case, EEF has a point.  But, if you stop there, you have failed to explore all your black market options.

This is a small island when it comes to people knowing each other.  I'm sure putting out the word that you're in the market will find you someone, or connect you with someone else, willing to sell an illegal gun.

Druggies, thieves and lifelong criminals aren't exactly the most reliable of customers.  If you have the cash, someone somewhere is out there waiting.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 16, 2022, 09:43:41 AM
I have never inquired to buy a gun illegally, so no I do not have a source.  Also I have never purchased or inquired to purchase a P80 either. So same same.  Like I stated, it cost HPD $800 to make 1 gun (testimony given by Major Nielson). Now assume they would sell it for a profit to criminals, the mark up would definitely be for sale about $1500.  Because if someone is making and then selling guns illegally, a $100 mark up isn't worth the risk. Then add in the time you need to spend on each gun and initial start up for tools needed.  Which you may already own, but let's assume you don't.  Would a criminal spend $1500 on a P80 knowig they will have to toss it in the bushes if being chased by HPD, or spend $400 (higher than $200), 

Lets assume a criminal would make a P80 instead of buying one already made, at minimum about $800, plus time and effort/labor. So would they do that or buy one for $400 and can just toss it if being chased.

Again, you are thinking like a law abiding citizen who is trying to maintain a clean record.  Think like an illegal arms dealer who doesn't care, but wants to make a quick and easy buck.

My thinking is that of a criminal who doesn't want to get caught.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 16, 2022, 09:45:18 AM
When you say ghost guns, do you mean P80s and like guns or guns with the serial numbers altered/removed?  Because our state defines both alike. So when the news says "ghost gun", unless they specify, it's unknown if its 1 or the other.  The HI guy serving 3 years for ammo possession as a felon in 2017 just sentenced had a "ghost gun". But yet he was only charged for ammo possession and not firearm possession/ghost gun, which carries a 5 year per gun.

Fair point, to me ghost gun meant guns manufactured without a serial number. I did not know the law also covered guns with removed serial numbers. (There is already a law covering removing a firearm serial number)
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 16, 2022, 09:47:37 AM
My thinking is that of a criminal who doesn't want to get caught.

There's no such thing as a perfect crime.  There's a risk of getting caught every single time someone breaks the law.  Sometimes it's just bad luck.

If that "criminal" really doesn't want to get caught, he would not be breaking the law, huh?

https://youtu.be/BJF-wVW1F2o
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 16, 2022, 09:50:35 AM
He only know how to think like EEF.  All of his hypotheticals are from his perspective, and the logic he uses is that of a keyboard commando.

If you read enough fiction books where the authors actually did their research, follow the studies on criminals and guns, and look at some actual documented cases of how guns were obtained, you really don't have to "know people in the black market" (racist?  O0 ).

80% of of people who were arrested and convicted of crimes while in possession of a firearm say the obtained them from friends, family members or "associates".  Associates can be other members of their gang, members of gangs they happen to know, people who were "recommended" by their friends, etc.  Basically, the "black market" is not some stranger selling guns out of his basement or trunk of his car parked in some alley.

Criminals know the ATF and other LE agencies do stings, and if the buyer were to trust a seller on Craig's List or FB, he's taking a huge risk of getting arrested before he's even attempted to use the gun.  Instead, they look for anyone in their immediate circle that can get a gun.  Failing that, they ask those in their immediate circle if they know where they can get one.  The closer to themselves the source is, the more they can trust it's not a sting or someone who will turn them in for attempting to illegally buy a firearm.

Most people don't associate with people who regularly deal in black market guns, so they have to rely on their acquaintances to steer them to someone.

EEF is more of a DIYer.  If he can't figure out how to get a "clean" gun and avoid the proper, legal process without help, he's less likely to try finding a "source" he can trust.

At the very least, he's making a false assumption that if he doesn't already know "people in the black market," that finding someone willing and able to sell him a gun is somehow more difficult than making a working firearm you can trust to work when needed.

I think going to a shady seller has more inherent risk than producing a gun yourself if you have no one to vouch for the seller.  So, in that narrow case, EEF has a point.  But, if you stop there, you have failed to explore all your black market options.

This is a small island when it comes to people knowing each other.  I'm sure putting out the word that you're in the market will find you someone, or connect you with someone else, willing to sell an illegal gun.

Druggies, thieves and lifelong criminals aren't exactly the most reliable of customers.  If you have the cash, someone somewhere is out there waiting.


Hahaha, so I think like a keyboard commando but you think like a real criminal?


How many of these studies on where people sourced their firearms have been done since 3D printing, P80 parts, etc became widespread? There have been cases now where these P80 guns have been showing up in crimes.  Talking about a 10 year old study before this technology was widespread is going to have limited implications.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 16, 2022, 09:51:20 AM
There's no such thing as a perfect crime.  There's a risk of getting caught every single time someone breaks the law.  Sometimes it's just bad luck.

If that "criminal" really doesn't want to get caught, he would not be breaking the law, huh?


Ok, ok.
My thinking is that of a criminal who wants to reduce their chances of getting caught. Happy now?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 16, 2022, 09:52:12 AM
Fair point, to me ghost gun meant guns manufactured without a serial number. I did not know the law also covered guns with removed serial numbers. (There is already a law covering removing a firearm serial number)

The OG use of the term "ghost gun" was a removed/altered serial number. Recently, they added in P80 type builds which majority have no serial number because they are not firearms. And it's up to the owner to add a serial number.  HI's law goes 1 step further and also names intended parts that can be used to build a "ghost gun" .  So if HPD comes to your door and finds a barrel and you state it's to assemble a "ghost gun", then you are breaking HI law.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 16, 2022, 09:54:47 AM
Ok, ok.
My thinking is that of a criminal who wants to reduce their chances of getting caught. Happy now?

So, now you're splitting hairs.

It's a binary decision:  break the law and risk getting caught, or obey the law and have zero risk.

Given the number of people caught with illegal guns, and deducing there are probably many more than that who haven't been caught, it's my opinion that getting caught was not high on their list of considerations.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 17, 2022, 01:29:43 PM
So, now you're splitting hairs.

It's a binary decision:  break the law and risk getting caught, or obey the law and have zero risk.

Given the number of people caught with illegal guns, and deducing there are probably many more than that who haven't been caught, it's my opinion that getting caught was not high on their list of considerations.

Binary? Now you are oversimplifying, as if there is no difference in risk levels by methods involved.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on March 17, 2022, 02:24:07 PM
Binary? Now you are oversimplifying, as if there is no difference in risk levels by methods involved.

You give criminals much more credit for making logical decisions than they deserve.

#Academic
#AlternateReality
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 18, 2022, 12:59:49 PM
You give criminals much more credit for making logical decisions than they deserve.

#Academic
#AlternateReality

Depends on the criminal I suppose. A chronic itching for his next quick fix probably isn't going to be as careful.

Perhaps an arms dealer who needs to be smarter would be more concerned about getting caught and more likely to go with P80s. I am interested to see what data comes out on this in a few years
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 18, 2022, 01:34:39 PM
People who speculate on how firearms work and manufactured shouldn't be arguing for more laws.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: hvybarrels on March 18, 2022, 01:39:33 PM
Let's make a law and then figure out in 5 or 10 years if we actually needed it or not
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 27, 2022, 09:24:52 PM
People who speculate on how firearms work and manufactured shouldn't be arguing for more laws.

Anyone who isn't a chemist or doctor shouldn't argue for drug laws then?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 27, 2022, 09:35:17 PM
Anyone who isn't a chemist or doctor shouldn't argue for drug laws then?

If you want to argue just for the sake of arguing knock yourself out. Two different issues here.

https://www.youtube.com/watch?v=mNjdlJxanmQ

I wouldn't trust a person who makes just 1911 grips do a slide to frame fit or barrel fit on my 1911.
 You don't know what it takes to make anything out of the methods you mentioned: additive or CNC machining.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 27, 2022, 09:51:08 PM
Anyone who isn't a chemist or doctor shouldn't argue for drug laws then?
What if they arent the 2, but have experience?

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on March 27, 2022, 10:15:27 PM
If you want to argue just for the sake of arguing knock yourself out. Two different issues here.

I wouldn't trust a person who makes just 1911 grips do a slide to frame fit or barrel fit on my 1911.
 You don't know what it takes to make anything out of the methods you mentioned: additive or CNC machining.

The point was that you are making a non sequitur argument. Someone doesn't need to understand how a CNC milling machine or a 3d printer work to understand that these tools can be used to make firearm parts. With such a high standard laws could never be passed because no legislators are experts in every area. Now if a legislator wants to outlaw a certain part of a firearm they should know enough about the part to justify why it should be illegal of course but they don't have to be a firearms expert to understand that 3D printing technology creates an additional means by which someone could manufacture a firearm.


I know enough to complete a P80 and assemble a functioning firearm with parts. I don't currently know how to use a CNC milling machine but I am resourceful enough to learn if I decided I wanted to make firearm parts with one. I know the capabilities of the machines though

Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 27, 2022, 10:33:57 PM
The point was that you are making a non sequitur argument. Someone doesn't need to understand how a CNC milling machine or a 3d printer work to understand that these tools can be used to make firearm parts. With such a high standard laws could never be passed because no legislators are experts in every area. Now if a legislator wants to outlaw a certain part of a firearm they should know enough about the part to justify why it should be illegal of course but they don't have to be a firearms expert to understand that 3D printing technology creates an additional means by which someone could manufacture a firearm.


I know enough to complete a P80 and assemble a functioning firearm with parts. I don't currently know how to use a CNC milling machine but I am resourceful enough to learn if I decided I wanted to make firearm parts with one. I know the capabilities of the machines though
I dont know how to make a p80. Nor resourcefull or wealthy enough to operate/own a CNC.



Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on March 28, 2022, 09:27:33 AM
legislators who knew little but had a lot of speculation (aka imagination) gave us the 1994 "assault weapons" ban.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on March 28, 2022, 09:42:16 AM
legislators who knew little but had a lot of speculation (aka imagination) gave us the 1994 "assault weapons" ban.

We testify and point out flaws in bills. But many fall on dead ears, as they have made up their minds prior to. Example taser law about sellers needing permits and background checks by HPD. Which checks have been waived because they don't know how to do them since the FBI told them they cannot use their federal check system.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 03, 2022, 09:42:29 PM
I dont know how to make a p80. Nor resourcefull or wealthy enough to operate/own a CNC.



Sent from my SM-G991U using Tapatalk

You could definitely figure out how to make one if you wanted, especially since they have guide blocks which basically show you exactly where to drill.

I was thinking about this further, people have been arguing that a stolen black market gun is going to be cheaper and criminals are just going to go for the cheaper option, but if that were really the case then we would expect not to see P80s involved in crimes. However this isn't the case and P80 guns have turned up in a number of crimes even here in Hawaii. So clearly at least some criminals have no problems paying more for a P80 over some stolen black market gun.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on April 03, 2022, 10:11:20 PM


You could definitely figure out how to make one if you wanted, especially since they have guide blocks which basically show you exactly where to drill.

I was thinking about this further, people have been arguing that a stolen black market gun is going to be cheaper and criminals are just going to go for the cheaper option, but if that were really the case then we would expect not to see P80s involved in crimes. However this isn't the case and P80 guns have turned up in a number of crimes even here in Hawaii. So clearly at least some criminals have no problems paying more for a P80 over some stolen black market gun.

And if a felon wanted to make a gun out of a block of polymir or aluminum, they could to. In circles we go.

Please post the stats of guns used by types below

P80 type
No serial # or altered serial # (OG ghost gun definition)
Stolen factory

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 03, 2022, 10:55:30 PM

And if a felon wanted to make a gun out of a block of polymir or aluminum, they could to. In circles we go.

Please post the stats of guns used by types below

P80 type
No serial # or altered serial # (OG ghost gun definition)
Stolen factory

Sent from my SM-G991U using Tapatalk

I don't know if such data has been widely gathered yet, I only know that they have turned up a number of times.
I would be curious to see what percentage they represent and how that changes over the next decade or so.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on April 03, 2022, 11:49:55 PM
So without knowing the % of all 3, just because p80s turned up is reason?

Of course a new way of creating something will turn up more that what it was prior (zero).

100 p80s could turn up, but if 800 stolen factory  guns did, then its not really an issue is it?

What ifs can go in circles and start from square 1.

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on April 03, 2022, 11:59:57 PM
The P80s I read about were built and sold by someone other than the person arrested with them.

So, no.  Most crooks are not paying more to make guns than a stolen gun costs.  The people doing the builds already have the machines.

Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 09, 2022, 12:32:18 PM

Of course a new way of creating something will turn up more that what it was prior (zero).


That was my basic position the whole time. An additional method of obtaining a firearm makes it easier to obtain a firearm.

People here seem to want to defend P80s and 3D printing so much that they don't want to admit it makes it easier to obtain firearms. I can defend p80s while still admitting their downsides.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on April 09, 2022, 01:22:08 PM
That was my basic position the whole time. An additional method of obtaining a firearm makes it easier to obtain a firearm.

People here seem to want to defend P80s and 3D printing so much that they don't want to admit it makes it easier to obtain firearms. I can defend p80s while still admitting their downsides.
Easy isnt the right word. Like i said, i cannot make 1 reliably. Neither could the guy on vice and that was with an expert next to him guiding. Took 6 hrs and still wouldnt fire 2 rounds in a row (semi auto).

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 11, 2022, 10:05:11 PM
Easy isnt the right word. Like i said, i cannot make 1 reliably. Neither could the guy on vice and that was with an expert next to him guiding. Took 6 hrs and still wouldnt fire 2 rounds in a row (semi auto).

Sent from my SM-G991U using Tapatalk

Didn't say easy, I said easier and I didn't talk about the manufacture and assembly process I was talking about the obtaining process.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: ren on April 11, 2022, 10:12:55 PM
What is there to "defend" about 3d printing?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on April 11, 2022, 10:48:51 PM
Didn't say easy, I said easier and I didn't talk about the manufacture and assembly process I was talking about the obtaining process.
I guess buying a block of plastic is easier than buying a factory gun. And grinding off a serial # in a stolen gun is easier and cheaper than making a p80.

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on April 11, 2022, 11:51:27 PM
I guess buying a block of plastic is easier than buying a factory gun. And grinding off a serial # in a stolen gun is easier and cheaper than making a p80.

If you have a stolen gun, does the serial number really matter?  Not like the number can be used to tie you to a specific crime, since there's no record of you owning it.

Which is worse?  Being in possession of a gun reported stolen (based on the serial number), or having a gun with the serial number removed?

I tend to think a gun with an altered number is worse.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 13, 2022, 02:39:44 PM
If you have a stolen gun, does the serial number really matter?  Not like the number can be used to tie you to a specific crime, since there's no record of you owning it.

Which is worse?  Being in possession of a gun reported stolen (based on the serial number), or having a gun with the serial number removed?

I tend to think a gun with an altered number is worse.

If it didn't matter why would criminals so often grind the serial number off? I would rather have a gun with a ground off serial number than one identfiable and possibly linked to a crime.

Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 13, 2022, 02:42:16 PM
I guess buying a block of plastic is easier than buying a factory gun. And grinding off a serial # in a stolen gun is easier and cheaper than making a p80.

Sent from my SM-G991U using Tapatalk

Grinding off a serial number is not only omitting another crime but also wouldn't necessarily prevent tracing the gun back to a crime with that firearm.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on April 13, 2022, 03:02:19 PM
Grinding off a serial number is not only omitting another crime but also wouldn't necessarily prevent tracing the gun back to a crime with that firearm.

"Omitting?"   :crazy:

There's that phrase again: not necessarily.

Nothing is guaranteed, but it's more productive to discuss the vast majority rather than continually muddying the waters with rare or unlikely outcomes.

If that gun was used in a previous crime, why is it now on the streets again?  Did a Cop steal it from evidence and obliterate the serial number as a "throw down?" Maybe he needed a "clean gun" to commit a crime that couldn't be traced to him or the department?  Who has access to "guns used in crimes" other than the police?

If someone commits a crime using a gun, chances are they are now felons, unable to reclaim their gun.  If they owned it, it probably gets destroyed.  If they stole it, it may be returned to the owner.  What are the chances the same gun gets stolen and used in a crime twice and THEN a third time with the serial number removed?

Just wondering why you think a gun with a removed serial would be in a criminal's hands.  If the same gun was able to be traced "back to a crime with that firearm,"  how would that even work exactly?
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 13, 2022, 03:11:05 PM
"Omitting?"   :crazy:

There's that phrase again: not necessarily.

Nothing is guaranteed, but it's more productive to discuss the vast majority rather than continually muddying the waters with rare or unlikely outcomes.

If that gun was used in a previous crime, why is it now on the streets again?  Did a Cop steal it from evidence and obliterate the serial number as a "throw down?" Maybe he needed a "clean gun" to commit a crime that couldn't be traced to him or the department?  Who has access to "guns used in crimes" other than the police?

If someone commits a crime using a gun, chances are they are now felons, unable to reclaim their gun.  If they owned it, it probably gets destroyed.  If they stole it, it may be returned to the owner.  What are the chances the same gun gets stolen and used in a crime twice and THEN a third time with the serial number removed?

Just wondering why you think a gun with a removed serial would be in a criminal's hands.  If the same gun was able to be traced "back to a crime with that firearm,"  how would that even work exactly?

Sorry, typo. Committing.

And yes, "not necessarily". In some situations grinding off a serial number may prevent cops from connecting the gun to another crime but in other situations there still might be enough identifying factors to connect the firearm to another crime. 
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on April 13, 2022, 03:25:15 PM
Grinding off a serial number is not only omitting another crime but also wouldn't necessarily prevent tracing the gun back to a crime with that firearm.
Tracing what kind of crime do u mean?

Sent from my SM-G991U using Tapatalk

Title: Re: hOmEmAdE mAChInE gUnS
Post by: Flapp_Jackson on April 13, 2022, 03:27:23 PM
Tracing what kind of crime do u mean?

Sent from my SM-G991U using Tapatalk

That was my question, too.
"Just wondering why you think a gun with a removed serial would be in a criminal's hands.  If the same gun was able to be traced "back to a crime with that firearm,"  how would that even work exactly?"
Title: Re: hOmEmAdE mAChInE gUnS
Post by: eyeeatingfish on April 25, 2022, 10:38:56 PM
Tracing what kind of crime do u mean?

Sent from my SM-G991U using Tapatalk

I meant that there are multiple ways to identify firearms and connect them in an investigation.
One can be a serial number
Another can be the lands and grooves in a barrel that puts a distinct mark on the bullet
Another can be unique marks left in the primer by the pin strike

So simply grinding off the serial number doesn't guarantee the gun can't be connected back to something else.
Title: Re: hOmEmAdE mAChInE gUnS
Post by: changemyoil66 on April 26, 2022, 08:53:45 AM

Another can be the lands and grooves in a barrel that puts a distinct mark on the bullet
Another can be unique marks left in the primer by the pin strike

So simply grinding off the serial number doesn't guarantee the gun can't be connected back to something else.

FIFY.

Just in case anyone else is wondering, there is no GPS on guns to put a time stamp when it was fired and at what location.  The way to ID a gun used at the scene of a crime is by the above (watch CSI for further details).