Help install a Bipod Mount (Read 6664 times)

BLKDRGN

Help install a Bipod Mount
« on: September 11, 2013, 05:20:19 PM »
My friend told me to get one of these bipod mounts for my Remington 700. Problem is that my rifle only has one sling stud. He said to get a mount like below and drill a hole in my stock chassis. Then use a button head bolt and a nut or something on the inside. Does this sound right?
http://www.midwayusa.com/product/976595/atlas-bipod-flush-cup-1913-radius-back-rail-335-steel-black



Google it cause every question is a dumb question.

Q

.
« Reply #1 on: September 11, 2013, 05:58:50 PM »
.
« Last Edit: September 25, 2016, 08:55:43 PM by Q »

BLKDRGN

Re: Help install a Bipod Mount
« Reply #2 on: September 11, 2013, 06:21:12 PM »
Just saying that the one you suggested wont fit my bipod. Any other suggestions?
Google it cause every question is a dumb question.

Q

.
« Reply #3 on: September 11, 2013, 06:58:53 PM »
.
« Last Edit: September 25, 2016, 08:56:11 PM by Q »

SpeedTek

  • Trade Count: (+44)
  • Hero Member
  • *****
  • Posts: 4749
  • Total likes: 126
  • Car Nut, Machinist, Gunsmith & Monkey
  • Referrals: 2
    • View Profile
    • X-Ring on the WWW
Re: Help install a Bipod Mount
« Reply #4 on: September 11, 2013, 06:59:54 PM »
But a Harris or shooters ridge

If you really need a picatinny mount then add a short piece of picatinny rail.
Political Correctness is FOS
I collect M1 Carbines, PM me if youre selling!
& Bolt Action 308s also 10/22 Rugers.
Buying STOCK Ruger 10/22 parts and bits, PM me.
Now doing Vintage VW Parts!

ren

Deeds Not Words

BLKDRGN

Google it cause every question is a dumb question.

BLKDRGN

Re: Help install a Bipod Mount
« Reply #7 on: September 17, 2013, 07:57:03 PM »
OK I got the parts but now ran into another road block. I picked up the curved rail and it fits perfect on my stock chassis.





Problem is on the inside. The braces are in the way of the fasteners. Should I cut them down so the fasteners fit and seat properly? Will this weaken the chassis too much? I'm pretty sure I have to drill and cut down the middle brace and install two screws.
 


« Last Edit: September 17, 2013, 08:44:14 PM by BLKDRGN »
Google it cause every question is a dumb question.

Q

.
« Reply #8 on: September 17, 2013, 09:35:56 PM »
.
« Last Edit: September 25, 2016, 09:15:06 PM by Q »

BLKDRGN

Re: Help install a Bipod Mount
« Reply #9 on: September 17, 2013, 09:38:53 PM »
Geez...with all this work, you should have just took it to Speedtek.

Who and where is Speedtek?
Google it cause every question is a dumb question.

Q

.
« Reply #10 on: September 17, 2013, 09:43:04 PM »
.
« Last Edit: September 25, 2016, 09:15:27 PM by Q »

BLKDRGN

Re: Help install a Bipod Mount
« Reply #11 on: September 17, 2013, 09:44:53 PM »
Oh I didn't know he works there. Hopefully I can go there this week.
Google it cause every question is a dumb question.

Hi state

Re: Help install a Bipod Mount
« Reply #12 on: September 17, 2013, 10:25:17 PM »
Yah just use a Dremel to take down the area needed to fit the T-nut if your worried about the chassis rigidity then get a aluminum bedded stock but ass long as u can put some pressure on the bipod and not have stock touch your barrel u should be fine.

BLKDRGN

Re: Help install a Bipod Mount
« Reply #13 on: September 19, 2013, 11:25:33 PM »
Thanks SpeedTek!



Google it cause every question is a dumb question.

SpeedTek

  • Trade Count: (+44)
  • Hero Member
  • *****
  • Posts: 4749
  • Total likes: 126
  • Car Nut, Machinist, Gunsmith & Monkey
  • Referrals: 2
    • View Profile
    • X-Ring on the WWW
Re: Help install a Bipod Mount
« Reply #14 on: September 20, 2013, 12:31:11 AM »
NIce! THANKS for the Tip!

Total Bill $1.50
Political Correctness is FOS
I collect M1 Carbines, PM me if youre selling!
& Bolt Action 308s also 10/22 Rugers.
Buying STOCK Ruger 10/22 parts and bits, PM me.
Now doing Vintage VW Parts!

scopemountguy

Re: Help install a Bipod Mount
« Reply #15 on: January 10, 2015, 08:47:52 AM »
Next time you want to mount a bipod to a stud try using the   S.R.A. (Swivel Rail Adapter) by Rota-Pod http://www.mountsplus.com/AR-15_Accessories/AR-15_Scope_Rings/143-MIM-SRA.html