922r here in hawaii (Read 4748 times)

judofreak72

922r here in hawaii
« on: October 20, 2013, 07:27:10 PM »
i just picked up a sporter saiga 7.62x39mm rifle with the intent of converting it to an ak47 style gun. i know that federal law says you gotta cut down the foriegn parts to 10 or less for it to be legal. my question is being that hawaii is so anal with gun laws im wondering if there are any state laws that would prevent me from doing this. also do i have to reregister the "new" gun after im done if it is legal to do. any info would be great. thanks.

Kingkeoni

Re: 922r here in hawaii
« Reply #1 on: October 20, 2013, 07:51:01 PM »
No state laws prevent you from modifying your rifle into an AK47 style rifle.

No you don't have to re-register it when you're done.
Your number one Option for Personal Security is a lifelong commitment to avoidance, deterrence, and de-escalation.

Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.

Bunker

Re: 922r here in hawaii
« Reply #2 on: October 20, 2013, 08:04:44 PM »
I'm no lawyer but if converting to AKM style rifle, you'll need six US parts per 922r since you have a stamped receiver vice five parts for milled. I assume you mean AKM vice AK-47. It's a federal law, so state law should not be an issue. In fact HPD doesn't even know what they are looking at in most cases. Unless you change the receiver, you should be GTG with registering. Non-compliance is a hefty fine and/or five years in prison although rarely enforced, but I wouldn't want to be the test case. I make sure all of my AKs are 922r compliant unless pre-bans. Many place AK ads that clearly aren't compliant but that's their business and the buyers. Like I said I wouldn't want to be the test case. Someone may have the official legal answer but I've registered many original Type 2-4 Izhevsk and Tula AK-47s/AKMs built on 74ullc, NoDac and Firing Line receivers that were 922r compliant with no issues.

nasdqplaya

Re: 922r here in hawaii
« Reply #3 on: October 20, 2013, 11:09:47 PM »
I am picking up one of those saigas from buds guns later in the month of Nov. The links below have alot of parts and good info.
Good luck with the conversion.


www.mississippiautoarms.com   
www.carolinashooterssupply.com 

Tom_G

Re: 922r here in hawaii
« Reply #4 on: October 20, 2013, 11:30:39 PM »
This thread raises two recurring questions in my mind.  I hope that I can pose them here without seeming trollish, which is most assuredly NOT my intention.  Anyway...

#1.  In the world of post-Clinton AWB, why would anyone take the effort to convert a Saiga sporter instead of just buying an AK?
#2.  How can adherence to 922(r) be monitored?
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

Darmok and Jalad @Tanagra

Re: 922r here in hawaii
« Reply #5 on: October 21, 2013, 12:10:50 AM »
This thread raises two recurring questions in my mind.  I hope that I can pose them here without seeming trollish, which is most assuredly NOT my intention.  Anyway...

#1.  In the world of post-Clinton AWB, why would anyone take the effort to convert a Saiga sporter instead of just buying an AK?
#2.  How can adherence to 922(r) be monitored?

#2:  In my reading, since I have an AK and was interested, I found various discussions on 922r.  Here's a good synopsis:

Quote
Unsoeld/922R was not targeted to individuals, but a certain big importer named Century (CAI, CIA, etc), to try to put them out of business. After the Bush 1 import ban of 1989, Century just quickly started to remark the model numbers of the banned guns & changing a few features. The AKS-47 turned into the thumbhole stocked MAK-90 (modified AK 1990) without the barrel threads & bayonet lug. Once the guns were in the country there was nothing stopping (other than getting form 6 import permits delayed by ATF) importers or secondary companies from putting the evil features back onto the bad guns. The Feds thought that adding the 10 US parts BS would stop them from "flooding" the market with all the bad guns people wanted. The NRA & US gun manufactures got on board to get the law passed.

I'm not saying that people should ignore 922R, but ATF is not actively looking for those violations by end users. I could see them maybe trying to use 922R on one of their common failed Machine Gun busts. They often bust someone for unregistered machine gun possession, only to find that the gun is only a semi-auto. To save face they may try to find other violations like 922R.

So, if you are a drug dealer, wife beater, or anything else that invites LE to visit you, having an illegal AK with too many specific foreign components could result in an "add on" charge.  John Q. Public's firearm will most likely never be subjected to that kind of scrutiny.

My 2 cents...
"... the right to be let alone -- the most comprehensive of rights and the right most valued by civilized men."
--Justice Louis D. Brandeis

Bunker

Re: 922r here in hawaii
« Reply #6 on: October 21, 2013, 06:55:53 AM »
This thread raises two recurring questions in my mind.  I hope that I can pose them here without seeming trollish, which is most assuredly NOT my intention.  Anyway...

#1.  In the world of post-Clinton AWB, why would anyone take the effort to convert a Saiga sporter instead of just buying an AK?
#2.  How can adherence to 922(r) be monitored?
1. Can’t speak for everyone’s reason but in the case of Saiga rifles…they are made in the Izhmash factory in Russia and imported in the “Sporterized Configuration” (neutered) to get around the US import restrictions. AK enthusiasts buy these rifles for a fraction of the price of a real authentic Russian AKM and return them back to original specs or as close as possible, thus having a fairly accurate clone from the country and same factory where the AK originated. Real Russian AK-47/AKM kits are becoming very expensive and more and more difficult to obtain, and now the barrels cannot be imported intact. You used to be able to get a Russian kit with just the receiver cut in half but now barrels are cut also. Obviously true AK collectors/enthusiasts will not go the Saiga route but it’s a cheap and easy alternative for many.

As an example here is one of my original 1960s Russian AKM kits. By the time this AKM kit is complete, it will be a significant investment in both time and money but it will be as good as it gets since these rifles were never imported intact. Compliance parts not depicted in this photo.


2. 922r compliance is not monitored, just like hi-capacity mags but if someone ever got in any trouble with the law and LE started poking around with someone’s firearms, having 922r non-compliant firearms or illegal mags could certainly yield some heavy fines and/or jail time. For me, a few parts isn’t worth potentially landing in jail and ruining your life, even if LE isn’t actively enforcing the law.

judofreak72

Re: 922r here in hawaii
« Reply #7 on: November 01, 2013, 05:57:21 PM »
thanx for all the info guys...my reasoning was cost and having as close a "real" kalashnikov as possible...plus i think the conversion will be a fun project

SpeedTek

  • Trade Count: (+44)
  • Hero Member
  • *****
  • Posts: 4749
  • Total likes: 126
  • Car Nut, Machinist, Gunsmith & Monkey
  • Referrals: 2
    • View Profile
    • X-Ring on the WWW
Re: 922r here in hawaii
« Reply #8 on: November 01, 2013, 06:44:56 PM »
Talking with our buddy ATF agent,,,,,,,

If the gun was ever used in a crime or confiscated
And the ATF looks it over. That's when shit will hit
The fan.
Political Correctness is FOS
I collect M1 Carbines, PM me if youre selling!
& Bolt Action 308s also 10/22 Rugers.
Buying STOCK Ruger 10/22 parts and bits, PM me.
Now doing Vintage VW Parts!