a look at pinning an AR sight (Read 6086 times)

ren

a look at pinning an AR sight
« on: October 27, 2013, 08:23:28 PM »




if anyone is interested in it
http://www.keystoneaccuracy.com/servicerifles/rearsightpinmod.html
I had White Oak do my A2 upper and now since the CMP allows A4geries I'm converting my A2 upper to a flat top with KAC rails, flat top and carry handle.
Trying to regain my mojo in the highpower shooting game.
« Last Edit: October 27, 2013, 10:17:53 PM by ren »
Deeds Not Words

hnl.flyboy

Re: a look at pinning an AR sight
« Reply #1 on: October 27, 2013, 09:33:29 PM »
How do you convert an A2 to an A4?  I have a WOA upper that I'd like to convert...
LEX MALLA, LEX NULLA

FPC, SAF Life, HDF Life, GOA, HRA, Fun Factory VIP

ren

Re: a look at pinning an AR sight
« Reply #2 on: October 27, 2013, 10:08:35 PM »
How do you convert an A2 to an A4?  I have a WOA upper that I'd like to convert...

You'd have to replace the A2 upper with a flat top upper. The next issue is the carry handle. The standard issue carry handle has a shorter elevation screw that won't have enough to get you out to 600 yards.  The only stock carry handle I know is the RRA "national match" handle. WOA has one but they are 6 months behind on orders. So you can still install an A2 elevation wheel with a relief cut into the flat top upper. I'm looking at keystoneaccuracy's work on pinning a carry handle and cutting a relief cut into the upper.
You can also add rails and float them with a tube. The KAC M5 RAS needs to be modded by removing the upper front tab, upper rear locking gas tube thingy and grinding a bit off the front....voila an A4 with a free floating KAC M5.



Most of it is cosmetics and added utility. You can now have an upper that is suitable for CMP leg matches and have an SDM type upper. Just swap out the carry handle with an ACOG or other optic for zombie or prairie dog eradication.
I would prefer a whole new free float tube with rails but I think per CMP rules the delta ring needs to be there. Another option is installing DD Omega 12.0 rails as it installs using the delta ring and still free floats the barrel. They are rather pricey at about $300 new. KAC M5 seconds are $150 from Knights or about $70 on flEaBay. WIth a float tube $100 and KAC M5 seconds the total is still less than a brand new DD OMega 12.0 plus a sling swivel ( ~ $20) - although the Omega is simpler and cleaner.


« Last Edit: October 27, 2013, 10:16:16 PM by ren »
Deeds Not Words

Darmok and Jalad @Tanagra

Re: a look at pinning an AR sight
« Reply #3 on: October 27, 2013, 11:46:27 PM »
Any idea why the delta ring is required for CMP?  Just wondering why.

Thanks for the details posted already!   :thumbsup:
"... the right to be let alone -- the most comprehensive of rights and the right most valued by civilized men."
--Justice Louis D. Brandeis

hnl.flyboy

Re: a look at pinning an AR sight
« Reply #4 on: October 28, 2013, 03:41:11 AM »

Any idea why the delta ring is required for CMP?  Just wondering why.

Thanks for the details posted already!   :thumbsup:

(IMO, ) The CMP is more interested in how SIMILAR a rifle looks on the outside to the original Service Rifles than how they are internally (lead weights, freefloating barrels, two stage triggers, sight adjustments, etc.).
LEX MALLA, LEX NULLA

FPC, SAF Life, HDF Life, GOA, HRA, Fun Factory VIP

hnl.flyboy

Re: a look at pinning an AR sight
« Reply #5 on: October 28, 2013, 03:50:44 AM »
You'd have to replace the A2 upper with a flat top upper. The next issue is the carry handle. The standard issue carry handle has a shorter elevation screw that won't have enough to get you out to 600 yards.  The only stock carry handle I know is the RRA "national match" handle. WOA has one but they are 6 months behind on orders. So you can still install an A2 elevation wheel with a relief cut into the flat top upper. I'm looking at keystoneaccuracy's work on pinning a carry handle and cutting a relief cut into the upper.
You can also add rails and float them with a tube. The KAC M5 RAS needs to be modded by removing the upper front tab, upper rear locking gas tube thingy and grinding a bit off the front....voila an A4 with a free floating KAC M5.



Most of it is cosmetics and added utility. You can now have an upper that is suitable for CMP leg matches and have an SDM type upper. Just swap out the carry handle with an ACOG or other optic for zombie or prairie dog eradication.
I would prefer a whole new free float tube with rails but I think per CMP rules the delta ring needs to be there. Another option is installing DD Omega 12.0 rails as it installs using the delta ring and still free floats the barrel. They are rather pricey at about $300 new. KAC M5 seconds are $150 from Knights or about $70 on flEaBay. WIth a float tube $100 and KAC M5 seconds the total is still less than a brand new DD OMega 12.0 plus a sling swivel ( ~ $20) - although the Omega is simpler and cleaner.



That's cool they allow the rails on the rifle now. When did this change? I had an A4 style upper on order with them (with the A2 handguards) until I happened to meet a SSgt at Marine Corps Championships selling a complete-from-WOA rifle for a good deal. Now I wanna make it look like an A4.  :(
LEX MALLA, LEX NULLA

FPC, SAF Life, HDF Life, GOA, HRA, Fun Factory VIP

ren

Re: a look at pinning an AR sight
« Reply #6 on: October 28, 2013, 07:01:40 AM »
I think the change to allow rails was made in the 2011 rules. I have since seen the Marine Corps service rifles as such in the pic - with modded M5s and a flat top (if I remember). I also read that the AMU have switched over as well.
There's no advantage of an A2 over an A4 just utility and the rails can provide more grip. I'm still contemplating the changeover build. To build or not to build. That is the question that I am faced; to restore my mojo or empty my wallet - another perspective. Sometimes I wish I was less pragmatic
A shooting buddy recommended rails since I found my support hand slipping during rapids. I've since remedied that by refining my position.

Here is my dedicated CLE 22.


Just sent a flat top upper and carry handle to John Scandale of Keystone Accuracy for a relief cut into the receiver and pinned sights for the carry handle.
« Last Edit: November 14, 2013, 09:33:52 PM by ren »
Deeds Not Words