My son gets (and gets rid of) a lot of scrap metals at (would you believe it) a local scrap metal dealer. Including buckets of brass for the many firearms he reloads for. All he has to do is sort and select them out.
The scrap metal dealer gets his brass from the indoor ranges where it is impossible for shooters to pick up their brass beyond a certain distance from the firing line, and a lot of folks just trash their own brass around their own firing points when they police up.
He pays a little above what the dealer would get from the smelters, and that's fine with both of them. Let's face it, to him it's not "scrap brass," but "brass," in our sense of the word.
He also gets his lead for bullet casting from that dealer, although much of that nowadays is zinc (rather than lead) wheelweights, which he has to separate out for casting purposes. However, much of the lead scrap is from bullets falling down into the bullet trap, and all he has to do is melt it so the jackets (and sometimes steel cores) float to the surface.
Most of the lead from this source is pretty pure, since most of the shooting done at these ranges is for defensive practice, and defense bullet cores are usually pure soft lead for expansion purposes. (You alloy lead with almost anything and it gets harder.) Also, a lot of that lead is from .22s, which pretty much have to be pure soft lead because they have to expand to fill the .22's rifling when fired.
Terry, 230RN