I am doing the sand finish coat on mine now, but the initial wall was built a few years ago. Mine is retaining and from what I recall there are separate or different permits for types of walls. One is a basic type of permit and one is a detailed building permit. I did the wall when I initially started building my own home as an owner / builder job, so I don't exactly remember all the details of the wall portion. But I did raise the inside property line about 2 feet with fill and that alone required a retaining wall by code. Wall is higher than 6 feet outside the property line, but inside is 6ft.
Laying block isn't overly complicated and I have done quite a bit of block work, but as mentioned it is very labor intensive. There are some skills required to ensure that the wall is level, plumb and setting the block correct without losing the integrity of the mortar is important. The biggest failure is an incorrect mortar mix, slake time and guys taking too much time or effort shifting the block around (for level and plumb) losing the suction or integrity of the mortar, which eventually leads to failure. The key is having a good person or two with block skills and good tenders to feed the concrete and blocks. It absolutely SUCKS doing both jobs yourself, which is what I did recently doing 6ft columns on an approx 200ft run. Having 2 guys doesn't make the job twice as fast, it makes it about 3-4 times faster.