Creating a pistol from a rifle? (Read 27326 times)

eyeeatingfish

Creating a pistol from a rifle?
« on: March 30, 2015, 08:28:00 AM »
As I understand it when you put a stock on a pistol it becomes a short barrelled rifle so does the reverse hold true? If I take a weapon that is manufactured as a rifle and cut off the butstock can it then be registered as a pistol or is it more complicated? (assuming it is not an "assault pistol") I am wondering what it would take to make a pistol version out of a gun manufactured as a rifle. Seeing the AR platform done as a pump action started giving me idaes.

mauidog

Re: Creating a pistol from a rifle?
« Reply #1 on: March 30, 2015, 09:50:22 AM »
Quote
The BATFE has made it very clear that once a receiver is built into a rifle, whether by a factory or by you, it is always a rifle and converting it to a pistol is illegal. However, it is perfectly legal to build the receiver into a pistol first and then convert it to a rifle. If the receiver is built into a pistol first, you can configure it back and forth from handgun to rifle and back again as much as you want. However, you must be vigilant to ensure that the <16″ barrel is never on the receiver at the same time as a stock.

The proper order for converting an AR pistol to a rifle is to remove the short barrel (usually done by removing the entire upper receiver group), installed the 16″+ barrel (usually done by installing an entire upper receiver group), and then installing the stock. I repeat, the stock and short barrel must never be on the receiver at the same time or you will have created an illegal short barreled rifle (SBR).

The proper order for converting a rifle BACK to an AR pistol is to remove the stock, remove the 16″+ barrel, and finally install the <16″ barrel.

There is some wisdom in building every AR-15 lower receiver that you purchase into a pistol first. That way you have the maximum versatility should you want to convert it to a pistol later.
http://jerkingthetrigger.com/2013/11/20/ar-15-pistols-clearing-up-some-misconceptions/


BATFE Letter on Converting Pistols to Rifles
http://www.atf.gov/files/regulations-rulings/rulings/atf-rulings/atf-ruling-2011-4.pdf
An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

mauidog

Re: Creating a pistol from a rifle?
« Reply #2 on: March 30, 2015, 09:57:51 AM »
How you are allowed to register it is based on the 4473 that was filled out when the receiver was purchased, not how you finally configured it.  If it was sold and reported to the BATFE as a rifle, you can't register it as a pistol, and vice versa.

Most states have started registering stripped receivers as "Other" to permit the owner the latitude of choosing the configuration later.  The "Other" checkbox on the 4473 is a relatively recent addition to the form, and our state laws may not recognize its use for these items.  Almost all of the discussions on here advise to transfer the receivers as "Pistol" on the 4473 so you can make a legally registered pistol from it.
An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

eyeeatingfish

Re: Creating a pistol from a rifle?
« Reply #3 on: March 30, 2015, 10:35:12 AM »
Thankyou for the explanation, I kinda figured that might be the answer.

I just keep thinking about interesting pistol versions of guns normally a rifle.

A lever action pistol might not be practical but interesting nonetheless, especially in a .44 mag or something like that.
Or a pump action pistol would be cool. After seeing the pump action AR pistol (or at least what I thought was an AR pistol) chambered in 30 caliber. I just thought that would be a fun gun. Not sure what I would use it for though...
I have seen bolt action pistols but that never caught my fancy.
Not sure what other action types there are I would want to see in a pistol.

aieahound

Re: Creating a pistol from a rifle?
« Reply #4 on: March 30, 2015, 01:30:46 PM »
For lever action pistols there's the Rossi ranch hand or the Henry's mares leg.

eyeeatingfish

Re: Creating a pistol from a rifle?
« Reply #5 on: April 03, 2015, 08:47:49 AM »
So I can go out and by an AR lower, register it as a pistol, then buy an upper and figure out how to convert the upper into a pump. Anyone know if they make a pump kit or is that something custom?

bass monkey

Re: Creating a pistol from a rifle?
« Reply #6 on: April 03, 2015, 09:26:35 AM »
So I can go out and by an AR lower, register it as a pistol, then buy an upper and figure out how to convert the upper into a pump. Anyone know if they make a pump kit or is that something custom?

Read mauidogs post above. It explains this.  If you want a lower to build as a pistol you need to make sure the shop didn't already register it as a rifle.  Dogman went through this process as well. I believe you need to apply for a handguns permit as well.

How you are allowed to register it is based on the 4473 that was filled out when the receiver was purchased, not how you finally configured it.  If it was sold and reported to the BATFE as a rifle, you can't register it as a pistol, and vice versa.

Most states have started registering stripped receivers as "Other" to permit the owner the latitude of choosing the configuration later.  The "Other" checkbox on the 4473 is a relatively recent addition to the form, and our state laws may not recognize its use for these items.  Almost all of the discussions on here advise to transfer the receivers as "Pistol" on the 4473 so you can make a legally registered pistol from it.

aieahound

Re: Creating a pistol from a rifle?
« Reply #7 on: April 03, 2015, 09:54:54 AM »
. Anyone know if they make a pump kit or is that something custom?


Here's one to check out.

http://www.bentwoodgunsmithing.com/products.html#!untitled/cuy0

Check the products page and umos system.

mauidog

Re: Creating a pistol from a rifle?
« Reply #8 on: April 03, 2015, 12:52:13 PM »
So I can go out and by an AR lower, register it as a pistol, then buy an upper and figure out how to convert the upper into a pump. Anyone know if they make a pump kit or is that something custom?

Your statement "I can go out and by an AR lower, register it as a pistol" omits many facts I already gave you.

You must TRANSFER the receiver (at the point of sale) AS A PISTOL on the 4473.  Then you must apply for a pistol permit.  After the 2 week wait, you can then register it as a pistol.

If your pump-action upper has a < 16" barrel, and you do not install a  stock, then, YES, it's legal -- assuming you haven't done anything to make it an "assault pistol".  Disabling any semi-auto functionality ought to eliminate any chance of that happening.

Are you planning on building one, or is this just another academic exercise to start talking about AR magazines again?
An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

new guy

Re: Creating a pistol from a rifle?
« Reply #9 on: April 03, 2015, 02:50:29 PM »
.
« Last Edit: August 18, 2016, 02:37:09 PM by new guy »
Your mindset is your primary weapon. - Jeff Cooper

suka

Re: Creating a pistol from a rifle?
« Reply #10 on: April 03, 2015, 04:49:22 PM »
So I can go out and by an AR lower, register it as a pistol, then buy an upper and figure out how to convert the upper into a pump. Anyone know if they make a pump kit or is that something custom?

disabling the gas system, automatically renders the AR a bolt action pistol.

eyeeatingfish

Re: Creating a pistol from a rifle?
« Reply #11 on: April 03, 2015, 05:28:09 PM »
Your statement "I can go out and by an AR lower, register it as a pistol" omits many facts I already gave you.

You must TRANSFER the receiver (at the point of sale) AS A PISTOL on the 4473.  Then you must apply for a pistol permit.  After the 2 week wait, you can then register it as a pistol.

If your pump-action upper has a < 16" barrel, and you do not install a  stock, then, YES, it's legal -- assuming you haven't done anything to make it an "assault pistol".  Disabling any semi-auto functionality ought to eliminate any chance of that happening.

Are you planning on building one, or is this just another academic exercise to start talking about AR magazines again?

I think it would be a pretty cool gun. A 10" or 8" inch barrel should still develop some decent velocity right? Maybe an interesting hunting gun or even a decent defense weapon depending on what caliber you get it in. Probably not something I am ready to spend money on yet. Maybe something to do later in life.

I don't fully understand what you mean to transfer the receiver as a pistol at the point of sale... So I go you security equipment (or whoever) and buy a receiver saying it is a pistol and I can hold onto the receiver until I get the pistol permit, then just go in and register? Just not familiar with the forms, I just sign whatever at the gun store to get the gun.

aieahound

mauidog

Re: Creating a pistol from a rifle?
« Reply #13 on: April 03, 2015, 05:49:48 PM »
I think it would be a pretty cool gun. A 10" or 8" inch barrel should still develop some decent velocity right? Maybe an interesting hunting gun or even a decent defense weapon depending on what caliber you get it in. Probably not something I am ready to spend money on yet. Maybe something to do later in life.

I don't fully understand what you mean to transfer the receiver as a pistol at the point of sale... So I go you security equipment (or whoever) and buy a receiver saying it is a pistol and I can hold onto the receiver until I get the pistol permit, then just go in and register? Just not familiar with the forms, I just sign whatever at the gun store to get the gun.

There are 3 steps in acquiring a pistol in Hawaii:

1.  APPLICATION FOR PERMIT TO ACQUIRE

2.  TRANSFER OF OWNERSHIP

3.  REGISTRATION

You should research those things.
An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

eyeeatingfish

Re: Creating a pistol from a rifle?
« Reply #14 on: April 03, 2015, 05:56:29 PM »
There are 3 steps in acquiring a pistol in Hawaii:

1.  APPLICATION FOR PERMIT TO ACQUIRE

2.  TRANSFER OF OWNERSHIP

3.  REGISTRATION

You should research those things.

I am aware of that, I don't know the form numbers though.

mauidog

An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

mauidog

Re: Creating a pistol from a rifle?
« Reply #16 on: April 03, 2015, 06:17:12 PM »
I am aware of that, I don't know the form numbers though.

Are you the registered owner of this revolver?  And is it registered in Hawaii?  Was it a new gun or used?  Bought from a gun store, online, or 3rd party/previous owner?

https://2ahawaii.com/index.php?topic=8962.msg170811#msg170811

Just looking for a point of reference on how much you should know about buying guns in Hawaii.
An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

mauidog

Re: Creating a pistol from a rifle?
« Reply #17 on: April 03, 2015, 06:20:25 PM »
I am aware of that, I don't know the form numbers though.

Quote
So I go you security equipment (or whoever) and buy a receiver saying it is a pistol and I can hold onto the receiver until I get the pistol permit, then just go in and register?

This tells me you are not aware of the process.

An unarmed man can only flee from evil, and evil is not overcome by fleeing from it.   -- Jeff Cooper

eyeeatingfish

Re: Creating a pistol from a rifle?
« Reply #18 on: April 03, 2015, 08:19:09 PM »
This tells me you are not aware of the process.

I have purchased 7 firearms in Hawaii, I am aware of the process. I just didn't understand what you meant by this.
"You must TRANSFER the receiver (at the point of sale) AS A PISTOL on the 4473."

eyeeatingfish

Re: Creating a pistol from a rifle?
« Reply #19 on: April 03, 2015, 08:21:53 PM »
disabling the gas system, automatically renders the AR a bolt action pistol.

That would work but a pump action would be more fun.