Polymer tipped Matchkings, thoughts? (Read 4455 times)

Heavies

Polymer tipped Matchkings, thoughts?
« on: March 30, 2015, 06:03:05 PM »
http://www.thefirearmblog.com/blog/2015/01/21/new-sierra-tipped-matchking-bullets/
 
I have tried Hornady's offerings (Amax) in the past with mixed results lot to lot.  Sierra's new offering of polymer tipped projectiles look interesting.  BC of these new projectiles show drastic improvements over the regular SMK.
 
ie
.308 168gr.  BTHP SMK bc  .462
.308 168gr.  TMK         bc  .535
 
Claimed to be able to stay supersonic to 1000 yards with normal .308 velocity.  Sounds great! 

ren

Re: Polymer tipped Matchkings, thoughts?
« Reply #1 on: March 30, 2015, 07:20:27 PM »
Been following the performance results of the 77s at http://www.usrifleteams.com/forums/ (can't seem to find it now)
Here's a thread on terminal ballistics stupH: http://www.ar15.com/forums/t_6_42/443385_Seirra_TMK_question.html
on 69 TMKs: http://www.ar15.com/forums/t_6_42/443244_Sierra_69_gr_Tipped_MatchKing_Bullets.html
on 77s TMKs: http://www.ar15.com/forums/t_6_42/441012_Sierra_77gr_TMK_Anyone_shoot_any_yet__UPDATE.html&light=Sierra|tipped

The increased BC puts it above the 80 SMKs but several have noted the decreased case capacity because the bullet length is longer - due to the polymer tip. I've considered switching over but I have too many regular tipped Nosler 77s and 80s at 600. I suppose you can put them on par with Berger VLDs without the thin jackets.
« Last Edit: March 30, 2015, 07:28:11 PM by ren »
Deeds Not Words

Heavies

Re: Polymer tipped Matchkings, thoughts?
« Reply #2 on: March 30, 2015, 07:29:45 PM »
Been following the performance results of the 77s at http://www.usrifleteams.com/forums/ .
The increased BC puts it above the 80 SMKs but several have noted the decreased case capacity because the bullet length is longer - due to the polymer tip. I've considered switching over but I have too many regular tipped Nosler 77s and 80s at 600. I suppose you can put them on par with Berger VLDs without the thin jackets.

Interesting. Thanks Ren.

Do you know if the bearing surface of the projectile is the same as the regular SMK with the addition of the polymer tip up top, or is the bearing surface shorter, as in the Berger VLDs?  Reason I ask is, the load I currently use for the Berger Hybrid 168s is running around 2900 FPS in my 30" BBL.  The short bearing surface of the Hybrid is allowing me to push the speed with lower pressures.  If the bearing surface on these is long like the regular SMKs there is no way to push that kind of speed at a safe pressure.  However, with a higher overall BC than that of the hybrid, I suppose a lower velocity could net me similar results as the Hybrid, at less cost.

Sorry can't see the link, got to log in.

Heavies

Re: Polymer tipped Matchkings, thoughts?
« Reply #3 on: March 30, 2015, 07:34:15 PM »
Never mind.   ;D Your edit answered my question about the bearing surface, at least with .224 bullets.   :thumbsup:  Thanks!

Heavies

Re: Polymer tipped Matchkings, thoughts?
« Reply #4 on: March 30, 2015, 07:38:48 PM »
The pics in those threads looks as if they trim regular SMKs, then place the tip on the top.  Also, I am liking the terminal performance claimed.  That would be super to have a nice shooting match round that can reliably double for a game load! ;D ;D ;D

ren

Re: Polymer tipped Matchkings, thoughts?
« Reply #5 on: March 30, 2015, 08:03:15 PM »
Not sure about the Sierra jackets. I read that Nosler Comp. bullets use a thinner J4 jacket that they used to advertise on the box - not anymore. Sierras are expensive compared to Noslers - though some say Sierras are more consistent. I haven't found the same results, though those results are from shooters that are on a higher plateau of skill than I.
Deeds Not Words

Heavies

Re: Polymer tipped Matchkings, thoughts?
« Reply #6 on: March 30, 2015, 08:51:43 PM »
Not sure about the Sierra jackets. I read that Nosler Comp. bullets use a thinner J4 jacket that they used to advertise on the box - not anymore. Sierras are expensive compared to Noslers - though some say Sierras are more consistent. I haven't found the same results, though those results are from shooters that are on a higher plateau of skill than I.

My OCD reloading netted that result from Noslers.  They are about 2 times less consistent than the Sierras, and Bergers a little better than Sierras.  As the quality increases the prices increase.  Noslers, I have noticed are great bullets for the price, but fliers are way more frequent.  For our usage Bergers are a little overkill, IMO, thus I only really shoot them in sanctioned F-class matches, when we have them.  The consistency, shot to shot, is ever so slightly better than Sierras, but the wind makes the difference hardly noticeable. 

Heavies

Re: Polymer tipped Matchkings, thoughts?
« Reply #7 on: March 30, 2015, 08:53:51 PM »
I am thinking I am going over to Powder Valley and order some 168s, if they have them in stock....  Maybe do a load write up for the forum.   ;D