Fiber Optic Front Sights - Please Share Your Experiences (Read 45646 times)

Kingkeoni

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #20 on: February 02, 2016, 04:27:22 PM »
My favorite pistol sights  are TFO fiber optic sights. They have tritium as well as a fiber optic rod inside.

They glow bright in all light conditions.

Your number one Option for Personal Security is a lifelong commitment to avoidance, deterrence, and de-escalation.

Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #21 on: February 03, 2016, 07:26:03 AM »
My favorite pistol sights  are TFO fiber optic sights. They have tritium as well as a fiber optic rod inside.

They glow bright in all light conditions.
What color do you have? 

I think I've seen the green version and they were pretty darn bright during the day.  I've also heard that most tend to pick up the red easier. 

I'm thinking the TruGlo front sights are just too long to go along with the Glock 34 (would extend into the cutout in the slide).  At least for my tastes.  Don't think it would be much of an issue with the gun functioning, but something about the front sight sticking out into the cutout just bothers me.  I'll see how the Dawsons work and go from there.

gmau

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #22 on: February 03, 2016, 02:06:38 PM »
I had green TFO sights on my Glock 34.  I really liked how they looked but was annoyed at how it shot high enough that it was noticeable at 25yds at the bullseye range.  Also I didn't like how the length of the front sight causes it to hang over the open portion of the top of the 34 slide.

Figuring these two issues stemmed from the sights being optimized for a G17, my solution was to keep the rear TFO sight and get a replacement fiber optic front sight that was a different height.  I can try to look up the exact one I went with if you're interested (taller front sight, but not sure by how much), but it completely solved the alignment problem that I was having and no longer overhangs the slide opening.  The front sight is slightly narrower, red (contrasting the rear green), and doesn't have the Tritium of the TFO, but I love it for shooting at the range.

Ultimately very pleased with the final solution.

edit:  Found my invoice.  Front sight is Dawson Precision Part#019-003 .225 Tall x .125 Wide  Direct from Dawson Precision almost 3 years ago for $43 including shipping.

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #23 on: February 03, 2016, 02:47:22 PM »
I had green TFO sights on my Glock 34.  I really liked how they looked but was annoyed at how it shot high enough that it was noticeable at 25yds at the bullseye range.  Also I didn't like how the length of the front sight causes it to hang over the open portion of the top of the 34 slide.

Figuring these two issues stemmed from the sights being optimized for a G17, my solution was to keep the rear TFO sight and get a replacement fiber optic front sight that was a different height.  I can try to look up the exact one I went with if you're interested (taller front sight, but not sure by how much), but it completely solved the alignment problem that I was having and no longer overhangs the slide opening.  The front sight is slightly narrower, red (contrasting the rear green), and doesn't have the Tritium of the TFO, but I love it for shooting at the range.

Ultimately very pleased with the final solution.

edit:  Found my invoice.  Front sight is Dawson Precision Part#019-003 .225 Tall x .125 Wide  Direct from Dawson Precision almost 3 years ago for $43 including shipping.
Yeah.  The front sight of the TruGlos hanging over into the slide cutout for the 34 would bother me. 

I have this set on the way.

https://dawsonprecision.com/1-seller-dawson-precision-glock-fixed-competition-sight-set-black-rear-fiber-optic-front/

macsak

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #24 on: February 03, 2016, 03:35:44 PM »
Yeah.  The front sight of the TruGlos hanging over into the slide cutout for the 34 would bother me. 

I have this set on the way.

https://dawsonprecision.com/1-seller-dawson-precision-glock-fixed-competition-sight-set-black-rear-fiber-optic-front/

i forgot to mention
i have both dawson precision and 10-8 sight sets
the 10-8 have a ledge so you can rack your slide against your belt or holster, the dawsons do not
too late to help drck, but just another data point

jaynick

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #25 on: February 03, 2016, 04:18:45 PM »
i forgot to mention
i have both dawson precision and 10-8 sight sets
the 10-8 have a ledge so you can rack your slide against your belt or holster, the dawsons do not
too late to help drck, but just another data point
dawson offers the charger option for most of their sights too. its what i chose for my ppq. i put their regular novak style sights on a couple of my other pistols that are just for target use.

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #26 on: February 03, 2016, 04:24:17 PM »
i forgot to mention
i have both dawson precision and 10-8 sight sets
the 10-8 have a ledge so you can rack your slide against your belt or holster, the dawsons do not
too late to help drck, but just another data point
No worries.   :thumbsup:

I have Redback One 10-8 sights on two of my Glock 17s.  Those have tritium dots on the front sight though.  Yup, I've tried the "rack your slide on gear/belt" thing.  It was quite interesting the first time I tried it. 

I was close to ordering a set of 10-8 rear sight (would be pretty much same as on my Glock 17s) and their front sight with fiber optic for the 34.  Just decided to try something different, at least for now.  The Warren Tactical Sevigny competition sights was the other that I was considering. 

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #27 on: February 03, 2016, 04:25:38 PM »
dawson offers the charger option for most of their sights too. its what i chose for my ppq. i put their regular novak style sights on a couple of my other pistols that are just for target use.
I recently bought a PPQ and was considering trying a set of the Dawson sights for that gun.  Will likely eventually swap those sights out later.  Will see how the Dawsons work out on the 34. 

Surf

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #28 on: February 07, 2016, 11:30:24 AM »
Been running fiber for several years now and used the TFO with trits on my work P226.  These early TFO trit sets were crap, later they made the trit inserts more rugged.  Many fibers were not that rugged but now I use the below set up on the majority of my pistols.  I have been running the HIVIZ overmolded sights under hard use for a couple, three years with thousands of rounds and presentations.  No problems with them.  I also prefer a blacked out rear that is serrated.  I don't like the all flat black sights as they do tend to have glare issues.  I won't get into the defensive / tritium argument, but the below set up is how I like to run my pistols no matter the use.

jaynick

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #29 on: February 07, 2016, 12:29:42 PM »
I recently bought a PPQ and was considering trying a set of the Dawson sights for that gun.  Will likely eventually swap those sights out later.  Will see how the Dawsons work out on the 34.
they finally released truglo tfx for the ppq just fyi. as far as i know they never made a tfo that fit.
 i love my dawsons but they were the only option back then. kind of expensive for fiber optics but they are top quality.

but really any metal sight is better than the factory polymer especially with that wide ass rear notch.

oldfart

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #30 on: February 07, 2016, 01:22:09 PM »
they finally released truglo tfx for the ppq just fyi. as far as i know they never made a tfo that fit.
 i love my dawsons but they were the only option back then. kind of expensive for fiber optics but they are top quality.

but really any metal sight is better than the factory polymer especially with that wide ass rear notch.
...
I prefer a wide ass rear notch
What, Me Worry?

Inspector

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #31 on: February 07, 2016, 03:19:58 PM »
...
I prefer a wide ass rear notch
Me too!!!
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #32 on: February 08, 2016, 07:50:22 AM »
Been running fiber for several years now and used the TFO with trits on my work P226.  These early TFO trit sets were crap, later they made the trit inserts more rugged.  Many fibers were not that rugged but now I use the below set up on the majority of my pistols.  I have been running the HIVIZ overmolded sights under hard use for a couple, three years with thousands of rounds and presentations.  No problems with them.  I also prefer a blacked out rear that is serrated.  I don't like the all flat black sights as they do tend to have glare issues.  I won't get into the defensive / tritium argument, but the below set up is how I like to run my pistols no matter the use.


It's been a while since I last really looked into handgun sights and I just recalled that problems with fiber optic sights, particularly the durability of the front sight.  Seems like they have improved in that regard.  First time hearing of those HIVIZ sights.  Was checking out their website and they have some pretty interesting sights, especially for shotguns!  Seems like you've found them to be pretty durable.

I only have one gun with plain front and plain rear and that's a RIA 1911 9 mm that I picked up recently.  I can pick up the front sight ok, but I think I will soon add some bright paint on the top of the front sights.  Since the 1911 is primarily a "fun gun" to take to the range, I don't want to spend that much money on it right now. 

I would greatly appreciate your thoughts on defensive/tritium reasoning.  My current sight preferences are primarily based on what I've learned over the years in classes.  Yeah, I've used my current sight setup in lots of classes, range days, etc, but that's mostly in calm and controlled daylight situations.  That said, I'm always open to new/other setups.

they finally released truglo tfx for the ppq just fyi. as far as i know they never made a tfo that fit.
 i love my dawsons but they were the only option back then. kind of expensive for fiber optics but they are top quality.

but really any metal sight is better than the factory polymer especially with that wide ass rear notch.


Yeah, I noticed that the TruGlo TFX were available for the PPQ.  Might be a while before I replace the stock sights, but I will eventually.  I've been looking at Dawsons and 10-8 so far. 

My first impressions of the Dawson sights were very good.   :thumbsup:

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #33 on: February 08, 2016, 08:04:35 AM »
The Dawson sights arrived late last week and I was able to install them and take them out for a trip to the range over the weekend.  I have to say that I was very impressed with the sights, both the quality of the Dawson sights as well as the look and performance of the sights.  The true test will be when I am able to get the 34 back in competition, but I am happy with the sights so far. 

The sights were pretty easy to install.  The fit of the rear sight was VERY snug and took quite a bit of effort to get them into position.  I was using a Trijicon Glock rear sight pusher and it took a good amount of cranking to get the sight moving.  I don't know how I would've gotten the sight on if I had to use the punch that came with the sights.  The rear sight comes with a set screw, but I don't think that rear sight is at risk of moving very much through typical use! 

The front sight came with a red fiber installed and a green and red replacement fiber rods.  I like the red.  It was overcast when I got to the bullseye range, but the sights were still very easy to pick up.   Took a little bit of time to adjust the windage, but once that was set, the front sight was pretty much right on at 25 yards.  The fiber rod seemed a little smaller diameter than some other fiber optic front sights I remember trying in the past, but I think it's a good blend of large enough that I can pick it up quickly and not too big where it floods the rear sight notch.  This version has a decent amount of gap in the rear sight, which is what I'm used to with the sights on my Glock 17s. 

I also installed a Ghost Edge connector on the 34 as well.  Somewhat mixed reviews on that, but I think that's mostly due to it being that much different than the stock trigger.  Definitely will need more time with it to see if it grows on me. 

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #34 on: February 08, 2016, 08:06:03 AM »
Me too!!!

...
I prefer a wide ass rear notch

We still talking about handgun sights?   :P

Inspector

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #35 on: February 08, 2016, 11:22:32 AM »
We still talking about handgun sights?   :P
I am. What are you talking about?  :rofl:
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

oldfart

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #36 on: February 08, 2016, 04:31:58 PM »
We still talking about handgun sights?   :P
...
What did YOU think I was talking about? :rofl:
What, Me Worry?

Surf

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #37 on: February 09, 2016, 08:46:54 AM »
I would greatly appreciate your thoughts on defensive/tritium reasoning. 
This is a topic that is too much of a headache to discuss and I almost always avoid it, but I will give a quick, or maybe not so quick down and dirty. 

The LE / defensive world, driven by LE, dictates that you must have tritium night sights or you will die.  It is so strongly held in LE, that most people will preach it, even if they very little or even no credible low light training.  It is one of those indoctrinated beliefs that is firmly entrenched.  There is only very very limited situations where one might be benefited by the use of tritium sights and in those instances, we really should have a white light deployed anyway. 

With modern light technology / reliability, between the possibility of the weapon mounted light in conjunction with a handheld light, the instances are so statistically low for how I might deploy a weapon in a low light situation, that when I personally do risk vs reward assessment, I find the benefits from the fiber optic to be the deciding factor.  The tritium inserts are not visible when you deploy a white light source and when the tritium is full glow you can't properly identify or maintain good target ID as it is too dark.  This includes the target surroundings especially when things are kinetically dynamic so to speak and people start moving.  We cannot just trust our trits and shoot hoping to hit our target as it moves, as we are accountable for all rounds fired with confirmed ID.  When the trits do provide a good sight picture / alignment on a target under the correct low lux level (dim lighting), we should really be using a white light anyway, to ensure confirmation, especially this day in age. 

I have heard all the arguments both ways ad-nauseam and had discussions with IP, SME types and I pretty much avoid the topic like the plague.  If one has good modern equipment, combined with good modern technique and tactics it is a wash in low / no light.  Then we need to assess what benefits do I get from my sights in other situations when outside light sources exist or in daylight.  I don't discount other professionals opinions, but I must base my decisions off of my own experience which does include a lot of low light training on a regular basis.

You are starting to see a bit of change on this topic with some well respected people, but most of us who hold this opinion often don't find it worth arguing over.  Sorry, I don't mean to imply that I am respected, just there are those that others may respect who share this opinion.  But again, there are many who are steadfast and that is OK also and I am not one to preach to others that they should switch to a fiber optic sight.     

Edited to add - I have a video from the past that I may upload.  It is on my choices on Glock modifications and I talk about the sights that I like to use.
« Last Edit: February 09, 2016, 08:55:53 AM by Surf »

drck1000

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #38 on: February 09, 2016, 09:35:14 AM »
This is a topic that is too much of a headache to discuss and I almost always avoid it, but I will give a quick, or maybe not so quick down and dirty. 

1) The LE / defensive world, driven by LE, dictates that you must have tritium night sights or you will die.  It is so strongly held in LE, that most people will preach it, even if they very little or even no credible low light training.  It is one of those indoctrinated beliefs that is firmly entrenched.  There is only very very limited situations where one might be benefited by the use of tritium sights and in those instances, we really should have a white light deployed anyway. 

2) With modern light technology / reliability, between the possibility of the weapon mounted light in conjunction with a handheld light, the instances are so statistically low for how I might deploy a weapon in a low light situation, that when I personally do risk vs reward assessment, I find the benefits from the fiber optic to be the deciding factor.  The tritium inserts are not visible when you deploy a white light source and when the tritium is full glow you can't properly identify or maintain good target ID as it is too dark.  This includes the target surroundings especially when things are kinetically dynamic so to speak and people start moving.  We cannot just trust our trits and shoot hoping to hit our target as it moves, as we are accountable for all rounds fired with confirmed ID.  When the trits do provide a good sight picture / alignment on a target under the correct low lux level (dim lighting), we should really be using a white light anyway, to ensure confirmation, especially this day in age. 

3) I have heard all the arguments both ways ad-nauseam and had discussions with IP, SME types and I pretty much avoid the topic like the plague.  If one has good modern equipment, combined with good modern technique and tactics it is a wash in low / no light.  Then we need to assess what benefits do I get from my sights in other situations when outside light sources exist or in daylight.  I don't discount other professionals opinions, but I must base my decisions off of my own experience which does include a lot of low light training on a regular basis.

4) You are starting to see a bit of change on this topic with some well respected people, but most of us who hold this opinion often don't find it worth arguing over.  Sorry, I don't mean to imply that I am respected, just there are those that others may respect who share this opinion.  But again, there are many who are steadfast and that is OK also and I am not one to preach to others that they should switch to a fiber optic sight.     

Edited to add - I have a video from the past that I may upload.  It is on my choices on Glock modifications and I talk about the sights that I like to use.
Thank you for the insightful feedback. For me, I try to get at the background and how people came about to their preferences, recommendations, etc.  So many people will recommend this or that and either don't have a good reasoning (just regurgitation) or their reasoning doesn't match the needs of the person asking.  Certainly appreciate you taking the time to provide feedback!  :thumbsup:

1) Yeah, that's where most of why I chose a tritium on front sight.  From instructors (one in particular) in the past who have steered me that way.  My progression on sight preference started with three dots, which came with my first handgun.  So for a long time, that's what I was used to.  Then I went to the plain/serrated rear sight and where the dots on the rear sight were actually distracting to me.  I know for sure one instructor has lots of low/no light training and instruction, but not sure on the others.  I personally don't have much. However, I certainly see a lot of "that's how we've always done it" kind of thinking.  When I switched from the three tritium dot sights to the tritium front and serrated rear, it was after quite a bit of time going back and forth between the two and deciding for myself. 

2) I've done some classes where you doing things with dry guns and very little time with actual shooting. In most of those cases, I recall the only time I really noticed the tritium dot was in low light situation, like just enough light to barely ID something, but not exactly bright.  When using white light, I recall only really seeing the silhouette of the sights on the white light background.  To the point where I started wondering if I wasn't "doing it right" and wasn't utilizing the tritium dot "feature" properly.

3) I can see how getting into those discussions can be difficult.  Up until my recent venture into the fiber optic front sight, I avoided them due to previous experience/reports of the fibers cracking, falling out, etc.  Like any technology, seems like it has improved to address those concerns of durability of the sights.  While I quietly wondered about their effectiveness in defensive situations, including no/low light, I hadn't had that much first hand experience with them, so I try to maintain an open mind.

4) Now that I've been doing more research on handgun sights, I have noticed more than a few "known SMEs" have posted, articles, videos, etc on benefits/preferences for fiber optic front sights where I recall in the past that their preferences were tritium dot front.  Things change, technology gets better and I would hope that people stay current and at least try other stuff on the market.  Nowadays, I've come to the realization that while I am open minded on many things, including the finer details in firearms sights, setups, etc, that if someone is deadfast on "their way", so be it.  If someone asks me about my preferences, I will certainly share and try to give as much background information on why I chose that way.  If you're sure that what you chose is working for you, then awesome.  I think much of the butthurt comes when people are looking for confirmation of their preferences, but where it's based more on passed on information as opposed to personal experience.  That and there's always those who just like to argue/troll and there's always at least one. 

I recall your Glock mods video from back in the day (well, maybe like 2-3 years ago, haha). 

Surf

Re: Fiber Optic Front Sights - Please Share Your Experiences
« Reply #39 on: February 10, 2016, 10:50:10 AM »

4) Now that I've been doing more research on handgun sights, I have noticed more than a few "known SMEs" have posted, articles, videos, etc on benefits/preferences for fiber optic front sights where I recall in the past that their preferences were tritium dot front. 
I really have zero issues with a tritium front and I do like the Hack sights, but I won't waiver on the all black rear.  I just won't argue it either.  ;)

As for people coming around, I have had a few conversations with some very known names while traveling, and performing under low light situations in regards to my set up.  Most are quite amazed that I could perform just as well without trits, when most don't realize that they never really use them anyway.  There is a small bit of momentum from some of these known people that might change some minds on the topic in the future and it is starting to spread a bit. 

For myself, I have been doing things a bit different (non traditional) and taking a fair amount of heat over certain topics over the years.  A lot of that stuff is now commonly accepted.  Since I was involved in the early days of online social media content, I took heat for being a known so called professional / SME in the training world and that I was giving out too much free information that should be reserved for paying people.  Kinda like the masked magician giving out too many secrets I guess.  Stuff I used to say or do in my video's were again considered non-traditional and I got heat from some big names out there.  Now they are preaching and doing many of the same drills or techniques in their own training and subsequent video's and ironically I got out of the social media scene a couple, three years ago.  Now I am not talking about the rip off youtube gun hacks who would come out with a video that mimicked my topics shortly after I released mine and many have large channels now, but the true professional trainers. 

For myself, I do what I do and just drive on no matter what anyone says.  I let performance and results for myself and those I teach stand on its own merit.  So yes, you should trust but verify and find out what works well for you under performance and not just due to word of mouth. 

Here is a new Glock mod vid, can't find the old one.  This is only part 1.  Leaving town for a bit, so part 2 will be delayed.