Rust (Read 15516 times)

BananaClip

Re: Rust
« Reply #20 on: December 09, 2011, 10:33:33 AM »
It's funny, my knives marked with Taiwan are nicer than my knives marked with China... My CRKT M16 doesn't rust and it's marked Taiwan but the SOG Tanto blade use to rust and was marked China....
"In the beginning God created the heaven and the earth"- Genesis1:1 KJV

"The Truth Shall Set You Free"

"Once Blind But Now i See"

Jl808

Rust
« Reply #21 on: December 09, 2011, 11:52:05 AM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.
I think, therefore I am armed.
NRA Life Patron member, HRA Life member, HiFiCo Life Member, HDF member

The United States Constitution © 1791. All Rights Reserved.

antoinebugleboy

Re: Rust
« Reply #22 on: December 09, 2011, 12:37:39 PM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.

...and tasty!  :crazy:

I know you season cast iron skillets with cooking oil, so I guess there's no reason why it wouldn't work on knives.
There ain't no such thing as a free lunch. - Heinlein

I swear by my life, and my love of it, that I will never live for the sake of another man, nor ask another man to live for mine. - Rand

What can be asserted without evidence can also be dismissed without evidence. - Hitchens

GZire

Re: Rust
« Reply #23 on: December 10, 2011, 11:27:54 AM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.

...and tasty!  :crazy:

I know you season cast iron skillets with cooking oil, so I guess there's no reason why it wouldn't work on knives.

........because knives aren't cast iron?

Kingkeoni

Re: Rust
« Reply #24 on: December 10, 2011, 12:47:07 PM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.

...and tasty!  :crazy:

I know you season cast iron skillets with cooking oil, so I guess there's no reason why it wouldn't work on knives.

........because knives aren't cast iron?

Let him try.

He will be the only one who has bacon smelling knives.   :rofl:
Your number one Option for Personal Security is a lifelong commitment to avoidance, deterrence, and de-escalation.

Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.

nf9648

Re: Rust
« Reply #25 on: December 10, 2011, 01:30:54 PM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.

...and tasty!  :crazy:

I know you season cast iron skillets with cooking oil, so I guess there's no reason why it wouldn't work on knives.

........because knives aren't cast iron?

Let him try.

He will be the only one who has bacon smelling knives.   :rofl:

Fitting, if the knife in question is a pig sticker...

Kingkeoni

Re: Rust
« Reply #26 on: December 10, 2011, 06:31:40 PM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.

...and tasty!  :crazy:

I know you season cast iron skillets with cooking oil, so I guess there's no reason why it wouldn't work on knives.

........because knives aren't cast iron?

Let him try.

He will be the only one who has bacon smelling knives.   :rofl:

Fitting, if the knife in question is a pig sticker...

He's a collector, never hunted in his life.  :(
Your number one Option for Personal Security is a lifelong commitment to avoidance, deterrence, and de-escalation.

Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.

antoinebugleboy

Re: Rust
« Reply #27 on: December 11, 2011, 04:59:07 PM »
At another forum I used to frequent, a knife maker suggested using Sentry Solutions Marine Tuf-cloth on his tool steel (i.e. really non-stainless steel) knives.  He also suggested that if your knives were going to be used on any kind of food you plan to eat, use mineral oil instead since it is edible.

I haven't tried mineral oil but after I sharpen my knives with a 2 stage kitchen knife sharpener, I always put some canola or olive oil on a paper napkin and run it on the metal surface.  I've noticed little flakes of lint stick on the blade since I've done this though, probably from my pocket.

Not sure if the cooking oil is a good idea or not but the knife seems to work fine and stays sharp.

...and tasty!  :crazy:

I know you season cast iron skillets with cooking oil, so I guess there's no reason why it wouldn't work on knives.

........because knives aren't cast iron?

I guess I should stop trying to make eggs on my knives, then.
There ain't no such thing as a free lunch. - Heinlein

I swear by my life, and my love of it, that I will never live for the sake of another man, nor ask another man to live for mine. - Rand

What can be asserted without evidence can also be dismissed without evidence. - Hitchens

antoinebugleboy

Re: Rust
« Reply #28 on: December 11, 2011, 05:01:29 PM »
He's a collector, never hunted in his life.  :(

You are correct. Thanks for representing me.  :shaka:
There ain't no such thing as a free lunch. - Heinlein

I swear by my life, and my love of it, that I will never live for the sake of another man, nor ask another man to live for mine. - Rand

What can be asserted without evidence can also be dismissed without evidence. - Hitchens

antoinebugleboy

Re: Rust
« Reply #29 on: December 12, 2011, 11:20:16 PM »
I found out the following, which I hope will be useful to at least a few of you out there:

http://en.wikipedia.org/wiki/Silica_gel

Quote
Cat litter
Silica gel is also used as cat litter,[7] by itself or in combination with more traditional materials, such as clays including bentonite. It is trackless and virtually odorless. Purchasing silica in the form of cat litter can be an easy and cost effective way for retail consumers to purchase silica gel for use in other applications, such as maintaining the desired relative humidity in humidors, keeping tools or other materials rust-free in damp environments or long-term storage, and preserving dried food.

Get some crystal cat litter, tie off a bit in an old sock or other porous sack, and voila! Cheap desiccant pack! :) I can see tying off a big sock full of this stuff to put in a gun safe, for example.
There ain't no such thing as a free lunch. - Heinlein

I swear by my life, and my love of it, that I will never live for the sake of another man, nor ask another man to live for mine. - Rand

What can be asserted without evidence can also be dismissed without evidence. - Hitchens

antoinebugleboy

Re: Rust
« Reply #30 on: December 12, 2011, 11:28:12 PM »
Also, I picked up a couple of these Flambeau Zerust plastic boxes at Wal-mart for about $4 each.

http://www.flambeauoutdoors.com/fishing/zerust-protection/default.asp

This plastic supposedly releases a harmless vapor that fights rust. I've only had it a couple weeks, so I cannot speak to its effectiveness, but it's as cheap as other plastic bins, so why not? The dividers are perfectly sized for my knives.

And I also include a silica gel desiccant with each knife, after I've wiped them down with some RemOil (It was what they had at the store I went to.).

If my knives rust at this point (They're all of varying steels, from AUS-8A and Sandvik to CrMoV-whatchamacallits.), I'm just giving up and resigning myself to having to inspect them regularly and wiping rust off them. :(
There ain't no such thing as a free lunch. - Heinlein

I swear by my life, and my love of it, that I will never live for the sake of another man, nor ask another man to live for mine. - Rand

What can be asserted without evidence can also be dismissed without evidence. - Hitchens