Mulling over a rifle purchase... (Read 7552 times)

mrgaf

Mulling over a rifle purchase...
« on: February 04, 2017, 03:17:23 PM »
Been thinking about selling my Tikka Whitetail M595 Lefty in 7mm-08 and going with a Browning X-Bolt Hunter in 7mm-08. While the Tikka has been good to me, is very accruate and has taken quite a few deer here as well as Antelope and Elk in the mainland I still don't like the "canoe paddle" butt stock it has. Have never really cared for it. I have an X-Bolt Hunter in 223 and it shoots just as well as the Tikka. Like the short lift bolt on the Browning as well as the looks. Thought about a new stock (Boyd's) for the Tikka but afraid the accuracy will suffer. What to do, what to do! Any suggestions?  ::)




To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

jaynick

Re: Mulling over a rifle purchase...
« Reply #1 on: February 04, 2017, 03:56:17 PM »
i dont own either rifle but i did replace the factory tupperware on my remington with a boyds stock. it noticeably tightened up groups. i was hoping it would considering how much heavier and more rigid it was. fit and finish was quite nice when i received it, and has held up for the past couple of years.
 i got the textured flat black finish.  i give boyds  :thumbsup: :thumbsup:

Tom_G

Re: Mulling over a rifle purchase...
« Reply #2 on: February 04, 2017, 04:33:25 PM »
For me, function and fit trump appearance. If it works well, and fits me well, I'd never consider getting rid of it solely for a cosmetic reason.

I've had good luck with Boyds stocks. I replaced a sporterized stock on my m1903A4 with a Boyds benchrest stock. Had to do the final fit myself, had an experienced friend help me with bedding and finishing. That 80-year old battle rifle, using 70 year old Greek ammo, holds better than MOA at 400 yards when I do my job. It certainly did not do that with the original stock!
The difference between theory and reality is that, in theory, there is no difference between theory and reality.

mrgaf

Re: Mulling over a rifle purchase...
« Reply #3 on: February 04, 2017, 11:01:05 PM »
For me, function and fit trump appearance. If it works well, and fits me well, I'd never consider getting rid of it solely for a cosmetic reason.

I've had good luck with Boyds stocks. I replaced a sporterized stock on my m1903A4 with a Boyds benchrest stock. Had to do the final fit myself, had an experienced friend help me with bedding and finishing. That 80-year old battle rifle, using 70 year old Greek ammo, holds better than MOA at 400 yards when I do my job. It certainly did not do that with the original stock!

Agree however the Tikka feels very uncomfortable for me, mostly the raised cheek piece. Don't know why, it just does. I have no problems with the X Bolt stock. Fits like a glove.....
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

mrgaf

Re: Mulling over a rifle purchase...
« Reply #4 on: February 05, 2017, 12:31:33 AM »
i dont own either rifle but i did replace the factory tupperware on my remington with a boyds stock. it noticeably tightened up groups. i was hoping it would considering how much heavier and more rigid it was. fit and finish was quite nice when i received it, and has held up for the past couple of years.
 i got the textured flat black finish.  i give boyds  :thumbsup: :thumbsup:

Was the first in letting tight when you dropped your action in? Wouldn't mind getting one bedded but I don't know who does that here. Would also like to get a better butt pad but once again I have no idea who could professionally fit one here in Oahu. How was the butt pad that came with yours? :shaka:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

jaynick

Re: Mulling over a rifle purchase...
« Reply #5 on: February 05, 2017, 02:06:07 AM »
Was the first in letting tight when you dropped your action in? Wouldn't mind getting one bedded but I don't know who does that here. Would also like to get a better butt pad but once again I have no idea who could professionally fit one here in Oahu. How was the butt pad that came with yours? :shaka:
it fits nice and snug. i think i maybe used some 220 grit or something near the chamber part of the barrel.
the buttpad is decent. its not as soft as a limbsaver but it should be good enough for non magnum calibers. softer than magpul prs or luth-ar buttpads.

jc2721

Re: Mulling over a rifle purchase...
« Reply #6 on: February 05, 2017, 09:18:14 AM »
Was the first in letting tight when you dropped your action in? Wouldn't mind getting one bedded but I don't know who does that here. Would also like to get a better butt pad but once again I have no idea who could professionally fit one here in Oahu. How was the butt pad that came with yours? :shaka:
John Pereirra does excellent work on rifles.  He's usually at the Gun Show.  I'll PM you his number

mrgaf

Re: Mulling over a rifle purchase...
« Reply #7 on: February 05, 2017, 01:00:23 PM »
John Pereirra does excellent work on rifles.  He's usually at the Gun Show.  I'll PM you his number
Thanks!
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

mrgaf

Re: Mulling over a rifle purchase...
« Reply #8 on: February 08, 2017, 06:18:57 PM »
Was the first in letting tight when you dropped your action in? Wouldn't mind getting one bedded but I don't know who does that here. Would also like to get a better butt pad but once again I have no idea who could professionally fit one here in Oahu. How was the butt pad that came with yours? :shaka:

After much thought I've decided to keep the Tikka M595 Whitetail. Purchased a "prairie hunter" in pepper from Boyds. Gonna have it Laser panel checkered. Delivered price was reasonable. Don't particularly care for Boyd's customer service though (hard to get thru on the phone and took them three days for me to get a response to my questions via email. Hopefully everything will work out and there won't be any problems with the fit and finish. I plan to have it pillar bedded and the action bedded as well. Fingers crossed that John Pereirra will be willing to do the work......... :shaka:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

luckydog1

Re: Mulling over a rifle purchase...
« Reply #9 on: February 10, 2017, 06:47:48 AM »
Traded for a Tikka T3 .270 not long ago that had some grouping problems--like 5 inches at a hundred. Changed the recoil lug to SS and threw the aluminum one away.  Also installed a Limbsaver recoil pad and grinded the barrel channel where there was contact at 3 points.  Tightened the action screws to 40 lbs.  The rifle now groups under an inch with factory ammo , but my cheek weld is the pits.  Low mounted Nikon still requires a head lift and like you, been wondering about a stock swap but wouldn't want to jeopardize the accuracy.  Been contemplating a stock filler plus a riser( .75 inch).

mrgaf

Re: Mulling over a rifle purchase...
« Reply #10 on: February 10, 2017, 04:37:52 PM »
Traded for a Tikka T3 .270 not long ago that had some grouping problems--like 5 inches at a hundred. Changed the recoil lug to SS and threw the aluminum one away.  Also installed a Limbsaver recoil pad and grinded the barrel channel where there was contact at 3 points.  Tightened the action screws to 40 lbs.  The rifle now groups under an inch with factory ammo , but my cheek weld is the pits.  Low mounted Nikon still requires a head lift and like you, been wondering about a stock swap but wouldn't want to jeopardize the accuracy.  Been contemplating a stock filler plus a riser( .75 inch).
From what I've read the Tikkas perform better with a Boyd's stock. Me thinks if you get one pillar bed and/or bed the action your accuracy should stay the same or improve. That being said the stocks are cheap enough and if the accuracy stays the same dropping the action in AND the stock fits you then it's a win/win. If not the bedding will definitely tighten it up.
You said 40  pounds on the action torque. Hope it's inch pounds 😝
My Tikka M595 7mm-08 was always accurate but the stock never fit me very well and I disliked the boat-paddle butt stock. Hopefully it will group just as good if not better with the new stock.....fingers crossed..... :shaka:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

luckydog1

Re: Mulling over a rifle purchase...
« Reply #11 on: February 10, 2017, 07:53:41 PM »
Good alternative.  Waiting to hear results--thanks. :shaka:

mrgaf

Re: Mulling over a rifle purchase...
« Reply #12 on: February 20, 2017, 09:25:10 PM »
Good alternative.  Waiting to hear results--thanks. :shaka:

New stock shipping tomorrow UPS 2D. Shud have it this week... :thumbsup:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.