Giraud tri way trimmer or worlds finest (Read 20050 times)

tim808

Giraud tri way trimmer or worlds finest
« on: April 15, 2017, 03:54:33 AM »
I'm considering the giraud tri way trimmer for 223 since it also deburs and chamfers.  Currently, 223 is the only caliber I'll be reloading.

Later, I may reload for 9mm and 6.5 creedmore Since there is no tri way for 9mm...I'm looking at the worlds finest trimmer 2 since the chambers can be changed for different calibers.  The wft 2 only trims

The gtwt does 3 things but i would need to buy another one for other rifle calibers. 

The wft 2 only trims but can be used for pistol calibers and other rifles calibers by changing the chamber (about $27)

I'm leaning towards the wft 2 since it is more universal even if it won't debur/chamfer

I won't be reloading a lot of 223.  Maybe 50-100 a month.   

I like gtwt and wft because they index off the shoulder.

Any suggestions/recommendations?

Tnx

macsak

Re: Giraud tri way trimmer or worlds finest
« Reply #1 on: April 15, 2017, 04:13:10 AM »
I'm considering the giraud tri way trimmer for 223 since it also deburs and chamfers.  Currently, 223 is the only caliber I'll be reloading.

Later, I may reload for 9mm and 6.5 creedmore Since there is no tri way for 9mm...I'm looking at the worlds finest trimmer 2 since the chambers can be changed for different calibers.  The wft 2 only trims

The gtwt does 3 things but i would need to buy another one for other rifle calibers. 

The wft 2 only trims but can be used for pistol calibers and other rifles calibers by changing the chamber (about $27)

I'm leaning towards the wft 2 since it is more universal even if it won't debur/chamfer

I won't be reloading a lot of 223.  Maybe 50-100 a month.   

I like gtwt and wft because they index off the shoulder.

Any suggestions/recommendations?

Tnx
No need trim pistol


Sent from my iPhone using Tapatalk

rklapp

Re: Giraud tri way trimmer or worlds finest
« Reply #2 on: April 15, 2017, 08:34:59 AM »
I use this with my electric drill. Works great. You can also use the (Lyman) debur tool with the drill. I also know that WGS has a sizable inventory of these but they're only open on weekends now.
https://www.amazon.com/gp/product/B000LC2348/
https://www.amazon.com/gp/product/B00MHZO6MY/

I also use my drill to chamfer the military brass.
https://www.amazon.com/gp/product/B0063IDE6A/
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

ren

Re: Giraud tri way trimmer or worlds finest
« Reply #3 on: April 15, 2017, 09:18:00 AM »
I bought the Giraud TriWay a few years ago. It is just like his all in one machine but without a motor. I use a cheap corded drill. Fastest trimmer I used thus far without spending a few hundred $. I trimmed a lot in several sitting that I have enough brass to last a few years. It sits on the shelf now - for awhile.
Deeds Not Words

tim808

Re: Giraud tri way trimmer or worlds finest
« Reply #4 on: April 15, 2017, 10:14:26 AM »
Macsak - tnx I didn't know that!!   When I was reading about trimmers, one mentioned accommodating up 45 and I mistakenly assumed they also sold chambers for pistols.   I looked better this time and went to the very end of the list and they only have chambers for rifle calibers!!

Rklapp - tnx for the info!!  I'll look into it...it is a lot less $$$ than the wtf 2 and giraud.  The Lee seems to not index off the shoulder like the others.  I'm looking at eventually shooting med range and possibly long range and not sure how important indexing off the shoulder is for those ranges.  (I plan to retire on the mainland)

Ren - did you choose the giraud because you only reload for one rifle caliber?  I'm looking at the wts 2 mainly because my friend shoots 308. 

If it was just me, I'd probably just get the giraud since I'm lazy and worry about a creedmore trimmer when I cross that bridge since I'm not even sure if it will be 6.5 or 6.0 or another member of the 6.0 family

My struggle is between my pake and Hawaiian parts - cost vs ease - and also trying to keep it kiss as much as possible since I'm just starting

Tnx guys for all the help!
« Last Edit: April 15, 2017, 10:27:01 AM by tim808 »

ren

Re: Giraud tri way trimmer or worlds finest
« Reply #5 on: April 15, 2017, 10:30:28 AM »
I reload for 308 and 223. Bulk of it is 223.
I had the Lee. Cheap effective tool but it was slow and you still needed to chamfer
Deeds Not Words

tim808

Re: Giraud tri way trimmer or worlds finest
« Reply #6 on: April 15, 2017, 10:54:55 AM »
Hmmmm.  Maybe I'll have my friend just buy his own trimmer

Tnx Ren!

macsak

Re: Giraud tri way trimmer or worlds finest
« Reply #7 on: April 15, 2017, 10:55:41 AM »
Macsak - tnx I didn't know that!!   When I was reading about trimmers, one mentioned accommodating up 45 and I mistakenly assumed they also sold chambers for pistols.   I looked better this time and went to the very end of the list and they only have chambers for rifle calibers!!

Rklapp - tnx for the info!!  I'll look into it...it is a lot less $$$ than the wtf 2 and giraud.  The Lee seems to not index off the shoulder like the others.  I'm looking at eventually shooting med range and possibly long range and not sure how important indexing off the shoulder is for those ranges.  (I plan to retire on the mainland)

Ren - did you choose the giraud because you only reload for one rifle caliber?  I'm looking at the wts 2 mainly because my friend shoots 308. 

If it was just me, I'd probably just get the giraud since I'm lazy and worry about a creedmore trimmer when I cross that bridge since I'm not even sure if it will be 6.5 or 6.0 or another member of the 6.0 family

My struggle is between my pake and Hawaiian parts - cost vs ease - and also trying to keep it kiss as much as possible since I'm just starting

Tnx guys for all the help!

yeah, pistol pressures too low to elongate brass to a significant extent...

ren

Re: Giraud tri way trimmer or worlds finest
« Reply #8 on: April 15, 2017, 11:00:45 AM »
Forgot to add with the Giraud it took me about 3 seconds on average to trim, debur and chamfer.
Those Mechanix gloves work well in handling the cases.
I watch a movie and then I have a can of ready to load brass. With commercials.
Deeds Not Words

oldfart

Re: Giraud tri way trimmer or worlds finest
« Reply #9 on: April 15, 2017, 11:27:30 AM »
yeah, pistol pressures too low to elongate brass to a significant extent...
....
I dunno about yours, but mine gets shorter as it gets older   :rofl:


I have a gtw :thumbsup:
What, Me Worry?

tim808

Re: Giraud tri way trimmer or worlds finest
« Reply #10 on: April 15, 2017, 11:41:11 AM »
Ok I've read about people priming while watching tv

Now trimming while watching tv

I need to learn to multi task.  I still haven't learned to walk while I surf the web on my phone

tim808

Re: Giraud tri way trimmer or worlds finest
« Reply #11 on: April 15, 2017, 11:43:00 AM »
Problem solved.  Friend is getting a gtw in 308

Tnx guys!

Bcspy

Re: Giraud tri way trimmer or worlds finest
« Reply #12 on: April 15, 2017, 01:32:16 PM »
I got the Giraud motor system. If you going bulk, one of the best investments for reloading. It's like a super fast electric pencil sharpener. I used the drill one before but was tired of pressing the trigger, and can't watch the tv at the same time.

whynow?

Re: Giraud tri way trimmer or worlds finest
« Reply #13 on: April 15, 2017, 01:53:15 PM »
I use the Wilson Micrometer Trimmer on the Sinclair base with sharkfin attachment.  I plan to get the carbide cutting blade soon to replace the original.   Still need to chamfer and deburr after.  Other than being a cheap Charlie on spending for the Giraud, my reasoning to get a manual trimmer was in case of SHTF/no power, I still can perform all phases of reloading.  Use balance scales, but have a Franklin Arsenal digital scale to tell me if I'm close for convenience.   Also have a dial and a digital caliper for dims.   Everything else all manual.

Inspector

Re: Giraud tri way trimmer or worlds finest
« Reply #14 on: April 15, 2017, 02:14:24 PM »
....
I dunno about yours, but mine gets shorter as it gets older   :rofl:


I have a gtw :thumbsup:
He was talking about brass. Get your mind out of the gutter you OF.  :rofl: :rofl:
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

ren

Re: Giraud tri way trimmer or worlds finest
« Reply #15 on: April 15, 2017, 02:37:17 PM »
Watching Predators  and trimming brass :thumbsup:
Deeds Not Words

Bushido

Re: Giraud tri way trimmer or worlds finest
« Reply #16 on: April 15, 2017, 07:12:48 PM »
He was talking about brass. Get your mind out of the gutter you OF.  :rofl: :rofl:

Buwhahahahaha!!!!

rklapp

Re: Giraud tri way trimmer or worlds finest
« Reply #17 on: April 16, 2017, 08:22:18 PM »
Rklapp - tnx for the info!!  I'll look into it...it is a lot less $$$ than the wtf 2 and giraud.  The Lee seems to not index off the shoulder like the others.  I'm looking at eventually shooting med range and possibly long range and not sure how important indexing off the shoulder is for those ranges.  (I plan to retire on the mainland)
So if you index off the shoulder, you could still have varying COAL and subsequently varying OAL. Good question. What is more important, consistent length from the shoulder or consistent length from the primer?
Yahh! Freedom and justice shall always prevail over tyranny, Babysitter Girl!
https://ronsreloading.wordpress.com/

Heavies

Re: Giraud tri way trimmer or worlds finest
« Reply #18 on: April 17, 2017, 01:09:40 PM »
So if you index off the shoulder, you could still have varying COAL and subsequently varying OAL. Good question. What is more important, consistent length from the shoulder or consistent length from the primer?
As long as your brass sizing is consistent and accurate indexing off the shoulder of the case for trimming is fine. Shoulder to base dimensions sets headspace which is what one is after as far as shot to shot consistently. Neck trim off a thou or two isn't the end all for accuracy.  If it's off a lot, it could cause issues.  Any of the trimmers mentioned is well capable of doing the job.

I use the Giraud trimmer, it gets the job done quickly and easily.

oldfart

Re: Giraud tri way trimmer or worlds finest
« Reply #19 on: April 17, 2017, 02:57:52 PM »
Watching Predators  and trimming brass :thumbsup:
....
Get to the choppa!
What, Me Worry?