1. 2aHawaii
  2. Tools and Uses
  3. Reloading
  4. Primer Bulging out
Print
Pages: 1 2 [3]

Primer Bulging out (Read 20688 times)

Locker_09

Re: Primer Bulging out
« Reply #40 on: July 22, 2017, 04:41:49 PM »
So i made a dummy round with small base full sized. Still wont fit on the hornady but check all diameter and within the cartridge specs as per the book. I tested it to the rifle to see if it will chamber and it did. So i guess my gauge is shitty. At least now i kmow it will chamber and can be extracted easily. Thanks everyone for the inputs.
Logged

Heavies

Re: Primer Bulging out
« Reply #41 on: July 22, 2017, 05:48:38 PM »
Quote from: Locker_09 on July 22, 2017, 04:41:49 PM
So i made a dummy round with small base full sized. Still wont fit on the hornady but check all diameter and within the cartridge specs as per the book. I tested it to the rifle to see if it will chamber and it did. So i guess my gauge is shitty. At least now i kmow it will chamber and can be extracted easily. Thanks everyone for the inputs.

If its in spec, and it fit your rifle, should be fine.  Good times!  :shaka: :thumbsup:
Logged

Inspector

Re: Primer Bulging out
« Reply #42 on: July 22, 2017, 06:12:09 PM »
Quote from: Locker_09 on July 22, 2017, 04:41:49 PM
So i made a dummy round with small base full sized. Still wont fit on the hornady but check all diameter and within the cartridge specs as per the book. I tested it to the rifle to see if it will chamber and it did. So i guess my gauge is shitty. At least now i kmow it will chamber and can be extracted easily. Thanks everyone for the inputs.
Let me guess, it fits correctly in your Lyman gauge?
Logged
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

Locker_09

Re: Primer Bulging out
« Reply #43 on: July 22, 2017, 06:50:59 PM »
Quote from: Inspector on July 22, 2017, 06:12:09 PM
Let me guess, it fits correctly in your Lyman gauge?
yup.
Logged
Print
Pages: 1 2 [3]
« previous next »