Mossberg Elevator (Read 3940 times)

PalisadesKid

Mossberg Elevator
« on: June 10, 2018, 06:32:14 PM »
Anyone have any ideas or experienced this?

The "tabs" that affixes into the receiver (circled here) appear to be welded on and did not "spin" in place. Now I just noticed the "weld" wore off and now these tabs are spinning in place, BUT they do not fall out of the elevator (thankfully).

Anyone have any ideas or might know if this might be a problem over time? A new elevator is about $30.00 off Midway USA anyway and I was thinking about just buying a new one.

mrgaf

Re: Mossberg Elevator
« Reply #1 on: June 10, 2018, 07:43:01 PM »
Give Mossberg a call..... betcha they will give you a new one for free and answer your questions. Be sure to have your serial number handy. Lemme know how it turns out.... :shaka:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

Flapp_Jackson

Re: Mossberg Elevator
« Reply #2 on: June 10, 2018, 09:36:03 PM »
Mossberg has a standard 10 year warranty for their shotguns.

http://www.mossberg.com/service/
The reasonable man adapts himself to the world;
the unreasonable one persists in trying to adapt the world to himself.
Therefore, all progress depends on the unreasonable man.
-- George Bernard Shaw

PalisadesKid

Re: Mossberg Elevator
« Reply #3 on: June 11, 2018, 08:16:05 AM »
UPDATE:

Called Mossberg and they weren't positive if it would be an issue, but on the safe side they're sending me a free replacement as still under the warranty. Only took 2 minutes to get this done.

And just in case, im gonna end up buying one myself as a back up.

Yes, Im neurotic about gun parts and having extras laying around.

Thanks!

changemyoil66

Re: Mossberg Elevator
« Reply #4 on: June 11, 2018, 10:20:32 AM »
Welds broke loose would help it feed faster.  You must have received a CA compliant model. =P

mrgaf

Re: Mossberg Elevator
« Reply #5 on: June 11, 2018, 11:26:13 AM »
UPDATE:

Called Mossberg and they weren't positive if it would be an issue, but on the safe side they're sending me a free replacement as still under the warranty. Only took 2 minutes to get this done.

And just in case, im gonna end up buying one myself as a back up.

Yes, Im neurotic about gun parts and having extras laying around.

Thanks!

Sweet! Glad everything worked out for you. Now ya gotta shoot it like you stole it! :geekdanc: :shaka: :rofl:
To argue with a person who has renounced the use of reason is like administering medicine to the dead.  Thomas Paine.

No man can get rich in politics unless he is a crook.  It cannot be done. Harry Truman

Only good liberal is one taking a dirt nap.

PalisadesKid

Re: Mossberg Elevator
« Reply #6 on: June 11, 2018, 01:16:43 PM »
Sweet! Glad everything worked out for you. Now ya gotta shoot it like you stole it! :geekdanc: :shaka: :rofl:

Honestly I was at home with dummy shells trying to see if those tabs would break during normal cycling but looking back at it, it is wiser to just replace it.

Its my home defense firearm, so just in case, gonna have to have my AR bedside for now.  :thumbsup:

PalisadesKid

Re: Mossberg Elevator
« Reply #7 on: June 11, 2018, 01:17:16 PM »
Welds broke loose would help it feed faster.  You must have received a CA compliant model. =P

I'd have to put back the wooden dowel in the mag tube for it to be CA compliant  :D

PalisadesKid

Re: Mossberg Elevator
« Reply #8 on: June 11, 2018, 01:19:16 PM »
Mossberg has a standard 10 year warranty for their shotguns.

http://www.mossberg.com/service/

mossberg cs was super fast today. literally about 2 minutes and as soon as I mentioned the issue, the gal on the line said 'yeah, I can see what you mean and I've never heard of those coming loose, but Im already processing a new one to you so no worries."