Small Rifle Primers & Small Pistol Loads (Read 4872 times)

wirecounter

Small Rifle Primers & Small Pistol Loads
« on: May 17, 2012, 10:02:04 AM »
Does anyone use small rifle primers (SRP) for small pistol loads?  I have read two opposing view (for & against) and the majority falls on the side of it is okay.  I am curious to see if anyone else has done this since stocking one less item (SPP) would be great.

So, I loaded up a few 9mm rounds with SRP and plan to test them out this weekend.  I did not change anything else in my recipe and I will post my results.

hnl.flyboy

Small Rifle Primers & Small Pistol Loads
« Reply #1 on: May 17, 2012, 10:20:13 AM »
I heard it should be fine. I still have a bunch of small pistol primers do I haven't had a chance to try yet. I'm interested in seeing how this goes..
LEX MALLA, LEX NULLA

FPC, SAF Life, HDF Life, GOA, HRA, Fun Factory VIP

clshade

Re: Small Rifle Primers & Small Pistol Loads
« Reply #2 on: May 17, 2012, 01:04:45 PM »
I have no direct experience but from what I've read as long as your pistol's firing can smack the thicker rifle primer hard enough it should be fine.

astroboy

Re: Small Rifle Primers & Small Pistol Loads
« Reply #3 on: May 17, 2012, 06:50:53 PM »
I recall Vihta Vuori listed small rifle primers for use with N110 in 357mag.in their load manual. I tried this load in my S&W 586 with no problems.

wirecounter

Re: Small Rifle Primers & Small Pistol Loads
« Reply #4 on: May 17, 2012, 07:08:24 PM »
Thanks for the input guys!   :shaka:

I have a hammer fired handgun, Sig P226, so light strikes should not be a problem.

wirecounter

Re: Small Rifle Primers & Small Pistol Loads
« Reply #5 on: May 20, 2012, 07:27:11 PM »
Well . . . my handgun did not blow up!  Good news.

Actually, my handgun may have felt a bit snapper, but not by much.  So I am good to go as OGC has been out of small pistiol primers for a few weeks now.

Hmmm, may feel the urge to put together a primer order soon . . .  ::)

Inspector

Re: Small Rifle Primers & Small Pistol Loads
« Reply #6 on: May 20, 2012, 07:42:35 PM »
I know this doesn't answer your question but I have used standard small pistol primers in place of magnum small pistol primers in my .357 magnum loads. I tried a few side by side and I could not feel the difference. Even with the high powered loads the primer looked fine afterward upon inspection. And they ignited the load the same (by feel) as the magnum primers.
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

wirecounter

Re: Small Rifle Primers & Small Pistol Loads
« Reply #7 on: May 20, 2012, 07:51:24 PM »
Thanks for the info Inspector.  :shaka:

This is another experiment to try with my handloads as magnum primers cost more that small pistol primers.