on target results with a Dillon powder measure (Read 1495 times)

ren

on target results with a Dillon powder measure
« on: October 29, 2021, 10:53:44 AM »
Since our club uses an e target that measures velocity I thought more about using this feature.

Konrad uses his target system to validate his tests with thrown charges from a Dillon PM

Deeds Not Words

Bushido

Re: on target results with a Dillon powder measure
« Reply #1 on: October 30, 2021, 09:04:09 PM »
Since our club uses an e target that measures velocity I thought more about using this feature.

Konrad uses his target system to validate his tests with thrown charges from a Dillon PM



I moderate a 223/556 specific long range range group with over 5k members. When looking for a "node" or course a wider node will be most forgiving with a larger margin of error.  The case capacity of a 223 is so small that the powder charge is very critical to hold a tight waterline (vertical dispersion) . In F-Class at the national level, one 9 will cause you to lose the match. In long range, 1000y, they are cleaning with a 223, it comes down to X counts. Most load to .02 grains of powder weight charge with a high quality scale. My 20 string ES is single digit weighing to .02gr. I don't see how a thrown powder charge will ever get close to that. In SR the target is much larger but still holding a tight waterline will keep you in the middle of the target which would allow you the widest margin for wind call errors.

ren

Re: on target results with a Dillon powder measure
« Reply #2 on: October 30, 2021, 09:36:59 PM »
Reminded of tuned scales by this guy Scott Parker.
https://forum.accurateshooter.com/threads/scott-parker-tuned-10-10-scale.4048865/

I've been throwing charges with my Lee Auto Drum mounted on a Dillon and shot 600 with 77 Noslers loaded to mag length. I lost a bit to wind and had to come up a couple MOA for elevation but not too shabby.
Deeds Not Words