Easy to build standby generator from readily available stuff (Read 24206 times)

230RN

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 1529
  • Total likes: 71
  • But they're [u]supposed[/u] to be military-style!
  • Referrals: 2
    • View Profile
Easy to build standby generator from readily available stuff
« on: September 20, 2012, 11:43:58 PM »
Here's an interesting article on how to make a regular old AC induction motor into a 60Hz pure-sine-wave standby power generator from Greg, NS8O.  The only things needed are a few motor running capacitors (electrolytics can be subbed if done right) and a source of rotating power, like a lawnmower engine.  You just hook the caps in parallel with the motor.

http://www.qsl.net/ns8o/Induction_Generator

These things generate real power, not just a couple of watts.  He ran several at over a kW for hours at various amatuer radio field meetings.  And it's real sine wave clean power, not just "close enough" to a sine wave to just call it a sine wave.

Quote
An Easy to Build and Operate Induction Generator
 
Believe it or not, nearly everyone you know has at least one induction generator and probably more. That's right! You say that is impossible... well, read on!

Within every home in America there are motors that can be operated as generators. They may not be labeled as generators, but they will function just the same. These motors are often called "squirrel cage motors" and are in washing machines, dryers, water pumps and other devices too numerous to mention.

The methods outlined in the article are "do-able" by any reasonably accomplished home mechanic --no electrical knowledge is neeeded beyond, say, that required to safely do minor household wiring.

Here's a one-hp water pump motor he converted to a standby genset that puts out 1050 Watts at 105 volts.  (He says the voltage drop from 120 is due to inadequate driving power in the lawn mower engine.)



I'm all set for emergency power with a little 800 Watter, but if push comes to shove and the cowpies hit the airscrew, I figure it would be good to know how to build a standby generator from a motor and a gasoline engine.  Or maybe even a water wheel. :)

Or one of them windmill thingies.

Terry, 230RN
« Last Edit: September 21, 2012, 12:02:04 AM by 230RN »
I do believe that the radical and crazy notion that the Founders meant what they said, is gradually soaking through the judicial system.

Heavies

Re: Easy to build standby generator from readily available stuff
« Reply #1 on: September 21, 2012, 03:44:41 AM »
Thanks Terry.  I want to try this out. 

Where is good everyday sources to find these type of capacitors?

bass monkey

Re: Easy to build standby generator from readily available stuff
« Reply #2 on: September 21, 2012, 08:35:05 AM »
Never read the article yet but sounds like a good project. Wouldn't mind trying it out as well. I see choke push style lawn mowers at garage sales and the swap meet.

How big of a capacitor do you need for this?

I know radio shack sells some small ones. There's also this place by the airport that sells this kind of stuff. I'm wondering if gas pro would have any or liquid air. Could possibly also check out solar companies and see if they sell parts. I went to a shop down mapunapuna and they sold wire, and connections and stuff.

paulb3

Re: Easy to build standby generator from readily available stuff
« Reply #3 on: September 21, 2012, 08:36:06 AM »
Be careful with those capacitors.  For the effort I think just buying a cheap generator or two might be easier.

Heavies

Re: Easy to build standby generator from readily available stuff
« Reply #4 on: September 21, 2012, 09:52:26 AM »
Be careful with those capacitors.  For the effort I think just buying a cheap generator or two might be easier.
Heck yeah. A capacitor can make a bad day worse for sure.

bass monkey

Re: Easy to build standby generator from readily available stuff
« Reply #5 on: September 21, 2012, 10:35:20 AM »
What happens, they blow up?

And that guys instructions kinda, not really there.  I was looking at the schematics and was like, uh, does line mean wire?

Teichi

Re: Easy to build standby generator from readily available stuff
« Reply #6 on: September 21, 2012, 05:06:03 PM »
What happens, they blow up?

And that guys instructions kinda, not really there.  I was looking at the schematics and was like, uh, does line mean wire?
Capacitors hold a charge. They will zap you if you ar not careful.

230RN

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 1529
  • Total likes: 71
  • But they're [u]supposed[/u] to be military-style!
  • Referrals: 2
    • View Profile
Re: Easy to build standby generator from readily available stuff
« Reply #7 on: September 21, 2012, 11:08:15 PM »
The term "line" usually refers to the wires carrying useful energy from one place to a separate, other place.  As in, "I built a house and brought in the lines (meaning power lines) last week."  Or, "Before you replace that equipment, maybe you'd better check the line voltage."  Meaning the voltage in the building wiring.  It is similar to the English usage for domestic power in the wall outlets, which they call "the mains."

Line can have other uses in this context, such as in radio usage, "I used RG-8U cable as a transmission line from my transmitter to my antenna."



Apart from buying them (capacitors) on-line (allelectronics.com, Grainger, etc), you could pick up used ones from motor rewinding outfits and the like.  The author describes the use of electrolytics for AC.  Normally electrolytics are DC-polarized, having plus and minus connections, but  can be used on AC by connecting two of equal value in series, but with the two + terminals connected together or the two minus connections connected together, with the remaining terminals (both of the same polarity --both either -,- or +.+) connected to the outside AC circuit. 

This results in a non-polarized electrolytic capacitor of half the value of the original two capacitors, following the rule of capacitors in series.  See the article itself.

I used to pick up high-powered components by salvaging things like old microwave ovens, when I was doing "serious" ham stuff.  These contain high-value, high-voltage caps suitable for high-power stuff, as well as other high-power components.  Most of the time microwaves crap out and are discarded because something minor happened, like a fuse blowing or the timer circuits fail.  So the rest of the stuff is still good.

Yes, capacitors are dangerous.  In fact, one thing in the illustration above that I gasped at was the fact that the terminals of the capacitors were exposed.  But I assumed that they were covered in normal use, and simply uncovered for illustrative purposes in the photos.

The electrical charges stored by large caps (capacitors) are deadly.  The energy stored in a capacitor in Joules is 1/2 X (the voltage squared X the capacitance in Farads).  Not the microFarads.

This is why in high-voltage work, designers always put "bleeder resistors" across them, which discharge the caps slowly when not in use.

Not only are the charges deadly, but electrolytics also have a tendency to recharge themselves when not in use, which is why large ones are shipped with shorting wires across the terminals.  The wires drain the self-regeneration charges which can occur over time. 

I learned my electronics long before solid-state stuff, where voltages rarely exceed 12 or so Volts, and I was dealing with circuits  in various projects which went up past 25,000 volts (TV sets, for example, have at least this kind of anode voltage in them.)  The most helpful safety hint when working on this stuff "live" is to lock one hand in the back of your belt, to avoid the temptation to use two hands for an adjustment.  In case of a careless move, at least the electrical charge won't go from one hand to the other, through the chest area and your heart.

Hey, you know, it's no worse, really, than dealing with automotive dangers, like, don't do work underneath a car held up by one bumper jack and no chocks.  Or, like a friend of mine, who burned down his garage by testing the ignition spark while gasoline fumes were in the engine compartment.  No, it wasn't me.  I always disconnect the battery when fooling around with anything serious in there.  Apparently, car fires due to this cause are fairly common.

So, be careful, of course, but if you don't know what you're doing, get some help and advice.  If you google your "location + Amateur Radio Club" you can get in touch with Amateur Radio Operators who are usually delighted to help out in this kind of operation.

As an example, I googled "Honolulu Amateur Radio Club" and brought up their website and contact information for John, K1ER.    The acronym "ARC" is common to most Amateur Radio Clubs.  Hence, "harc" in the URL.

http://aditl.com/ham/harc/

Hey, John, K1ER, might convert you to amateur radio, and you might convert him into a shooter!

Tee-hee-giggle-giggle!

I sure hope this helps.  As I mentioned, this is for the normally-accomplished handyman type. I myself in my old age and dotage don't do large projects anymore (don't have my machine shop any more), but I was thinking of throwing together a small fractional-horse motor rigged as a generator just for shucks and grins.

73s

Terry, 230RN

ETA:  I don't know K1ER, never QSLed him.  For all I know, he's already a board member. :)



« Last Edit: September 22, 2012, 12:14:11 AM by 230RN »
I do believe that the radical and crazy notion that the Founders meant what they said, is gradually soaking through the judicial system.

ren

Re: Easy to build standby generator from readily available stuff
« Reply #8 on: September 23, 2012, 12:44:30 AM »
I remember RIchard Clark of car audio fame did a workshop at the LV CES and he explained that 12v caps were not hazardous. He had two 1 farad caps in his belt! Makes sense. Voltage and the resistance of our bodies. On the other hand, when I use to work on old CRT TVs, I did get shocked sometimes by the flyback.  Of course, it was way higher than 12v.
Deeds Not Words

230RN

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 1529
  • Total likes: 71
  • But they're [u]supposed[/u] to be military-style!
  • Referrals: 2
    • View Profile
Re: Easy to build standby generator from readily available stuff
« Reply #9 on: September 23, 2012, 02:42:04 AM »
I believe 50V is considered the "standard" borderline for a lethal voltage.  However, even with low voltage caps, there is a danger in terms of accidentally shorting them because of sparks and bits of molten metal being thrown around. etc. Like a car battery, you don't want to drop a wrench on the terminals.

You can easily ruin a screwdriver tip by melting if you short out a cap or a car battery with one as the stored energy gets suddenly dumped through the steel shaft.

You're right about the body's electrical resistance, though.  Even touching your wet (and therefore low resistance) tongue to a standard 9V battery can be unpleasant.  Yet,  you can handle them with your dry fingers and never feel a thing.



« Last Edit: September 23, 2012, 02:50:39 AM by 230RN »
I do believe that the radical and crazy notion that the Founders meant what they said, is gradually soaking through the judicial system.

Heavies

Re: Easy to build standby generator from readily available stuff
« Reply #10 on: September 23, 2012, 03:41:13 AM »
Amperage is what is bad for you. As little as .1 to .2 amps can kill you. 

Inspector

Re: Easy to build standby generator from readily available stuff
« Reply #11 on: September 23, 2012, 04:03:15 PM »
Amperage is what is bad for you. As little as .1 to .2 amps can kill you.
But you still need around 50 volts (as a minimum) to push the amperage through you. You can touch the terminals of a 12 volt car battery with 100 amps+ and it won't kill you. Telephone lines are about 50 volts but the amperage is in the miliampere range. So it has to be the right combination of volts and amperage to kill you. Most people who get shocked by our household sockets get a hell of a shock but are typically not killed (except for those prone to it such as those with heart conditions). That's about 120 volts and 20-30 amps. The people in Europe are not so lucky. Those who are shocked over there have a higher death rate. Over there it is around 220-240 volts at around 20 amps.

While you are correct it is the amperage that kills you it still needs a minimum amount of voltage to push the amperage through your body.
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!

230RN

  • Trade Count: (0)
  • Hero Member
  • *****
  • Posts: 1529
  • Total likes: 71
  • But they're [u]supposed[/u] to be military-style!
  • Referrals: 2
    • View Profile
Re: Easy to build standby generator from readily available stuff
« Reply #12 on: September 24, 2012, 08:25:27 AM »
But you still need around 50 volts (as a minimum) to push the amperage through you. You can touch the terminals of a 12 volt car battery with THE ABILITY TO DELIVER  100 amps+ and it won't kill you. Telephone lines are about 50 volts but the amperage AVAILABLE is in the miliampere range BECAUSE OF THE HIGH RESISTANCE IN THE WHOLE TELEPHONE LINE. So it has to be the right combination of volts and amperage to kill you. Most people who get shocked by our household sockets get a hell of a shock but are typically not killed (except for those prone to it such as those with heart conditions). That's about 120 volts and 20-30 amps. The people in Europe are not so lucky. Those who are shocked over there have a higher death rate. Over there it is around 220-240 volts at around 20 amps.

While you are correct it is the amperage that kills you it still needs a minimum amount of voltage to push the amperage through your body.

Exactly, but I touched it up to clarify the meaning.

The car battery can deliver 100+ amps into a low resistance load, like the screwdriver I mentioned above, because of the car battery's own very low INTERNAL resistance (it is a low voltage, low resistance source). 

So if you put your fingers on the battery terminals, the current is limited by your high body resistance.  Say the resistance between your two index fingers is 25,000 ohms, so the current that will flow is less than half a milliamp. 

But the higher-voltage 50 volt telephone line has a very high "INTERNAL" resistace as delivered from the central exchange through those itty-bitty 28-ish gauge wires and thus has an overall high resistance impeding the current flow.  High enough to limit the current available through it PLUS your own body's resistance to safe levels.

Sort of like a very long garden hose.  When closed at the delivery end, you might measure 50PSI static pressure near the outlet, but as soon as you open it and the water has to get through that very long thin "high resistance conductor," meaning the hose, you may only measure 10 or 15 PSI near the outlet.

Water flow in gallons per minute = pressure / resistance of the hose.

(The higher the pressure, the more flow, the higher the resistance, the less flow.)

Electrical current  = voltage ("pressure") / electrical resistance in the system.

(The higher the voltage, the more electrons flow, the higher the resistance, the fewer electrons flow.)

The latter is "Ohm's Law," the familiar  I = E / R.

The former is "Ohm's Law for water."

Terry, 230RN

NOTE 1:  I prefer the term "impedance" when talking about the total of all the things that can limit current flow through a circuit, such as the internal resistance of the battery plus the resistance of your body.  Likewise with respect to the internal resistance of the whole telephone line (and its own power supply resistance) plus the resistance of your body.  And in many circuits, there may be other "resistances" which limit current flow, such as inductive and capacitive reactances.  Put all of these together and you get "circuit impedance."

NOTE 2:  The body's electrical resistance is difficult to measure since it depends on so many things like sweat level, contact area, etc.  I picked "25,000" ohms merely for illustration, but it's in the right order of magnitude.

« Last Edit: September 24, 2012, 09:48:05 AM by 230RN »
I do believe that the radical and crazy notion that the Founders meant what they said, is gradually soaking through the judicial system.

Inspector

Re: Easy to build standby generator from readily available stuff
« Reply #13 on: September 24, 2012, 08:33:26 AM »
Just touching it up to clarify the meaning.

Terry, 230RN
Thanks for the clarifications. It is exactly what I meant to write!  ;D
SCIENCE THAT CAN’T BE QUESTIONED IS PROPAGANDA!!!