Squib shot - first one other than light primer strikes. (Read 1163 times)

robtmc

Squib shot - first one other than light primer strikes.
« on: March 10, 2022, 05:08:34 PM »
Took my wife with me to check out the sights on a rifle after overhauling the barrel fit.

Took her ancient Colt .380 Hammerless out for a spin.  God knows she needed a remedial session for firearm handling.  Anyway, pistol was working fine for ten shots or so.   Then a shot was somewhat muffled, but i was watching her, not for mechanical issues.  Told her to stop, ejected magazine and called it a day. 
Not a reload, a factory Sellior & Bellot FMJ 92 gr .380 ACP.  Picked up a case, may not have been the one in question.

Bullet about 1/3 down the barrel.  Unburned powder evident in the chamber area.   Wood dowel and pounding get the stuck bullet out the muzzle end.  In retrospect, going back towards the chamber would have been the shorter path.  Took some serious poundage to get it out, a bit of a surprise.

From reading of reloading guys experiencing this, seems to be usually a lack of power, and the primer alone pushing the bullet out into the barrel a short way.

zippz

Re: Squib shot - first one other than light primer strikes.
« Reply #1 on: March 10, 2022, 07:35:49 PM »
Odd that there's unburnt powder.

Maybe moisture/condensation got in the case, especially if it's been in high humidity for a long time.

robtmc

Re: Squib shot - first one other than light primer strikes.
« Reply #2 on: March 10, 2022, 07:57:15 PM »
S&B primers have a red sealant it appears.  The unburned powder still baffles me, like incomplete ignition.

Other than than that, just the usual humid swamp.   Most all the .380 ammo was stored in the safe for the few years since I bought it.

From a search, this pic is not unlike what the chamber area looked like: